Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
Flowmaster 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Performance Air Intake System- 402-273
$349.99
-
10-17 Audi Q5 (Sport Utility - 2.0 - AWD) Intercooler Kit
$1,305.59
-
JLT CAI-FMV6-11 Cold Air Intake Kit 2011-14 Mustang V6 No Tuning Required
$399.00
-
AEM-22-405 Short Ram Intake System
Price range: $299.99 through $399.99
-
Magnum FORCE AFE-59-00028 Cold Air Intake System Spare Parts Kit (2-3/4 IN ID x 2-1/2 IN L) Straight Coupler w/ Port - Black
$23.00
Image
Product
Price
-
- Flows 220 GPH and supports your 6.7L Powerstroke with enough fuel for up to 900 HP
- 2-micron filtration, built-in water separator, and patented air/vapor removal help protect injectors and extend injection-system life
- ORB fittings, 6061 aluminum black anodized fittings, and black fuel line deliver an ultra-clean installation
- Machined from durable 6061 T-6 billet aluminum in a black finish
- Purpose-built for 2017-2022 Ford Powerstroke 6.7L Truck/SUV applications
- Backed by the FASS limited lifetime warranty
Quickview
-
- Flows 240 GPH at 65 psi to support Ford Powerstroke 6.7L builds up to 1200 HP
- 2-micron filtration, built-in water separation, and FASS patented air/vapor removal protect and extend injector life
- ORB fittings, black anodized 6061 aluminum fittings, and black fuel line for an ultra-clean install
- Machined from durable 6061 T-6 billet aluminum with a black finish
- Direct fitment for 2017-2022 Ford Powerstroke 6.7L trucks and SUVs
- Backed by the FASS limited lifetime warranty
Quickview
-
- Flows 110 GPH at 65 psi to support your Powerstroke 3.0L from stock up to 700 HP
- 2-micron filtration with a built-in water separator helps protect injectors and extend injection system life
- Patented FASS air/vapor removal process eliminates fuel-related injector failure causes
- Ultra-clean install with ORB fittings, black anodized 6061 aluminum fittings, and black fuel line
- 6061 T-6 billet aluminum construction backed by a FASS limited lifetime warranty
- Direct fitment for 2018-2019 Ford Powerstroke 3.0L Truck/SUV, sold as each
Quickview
-
- Flows 140 gallons per hour and supports your 6.7L Powerstroke with enough fuel for up to 700 HP
- Advanced 2-micron filtration, built-in water separation, and FASS’s patented air/vapor removal help protect injectors and extend injection system life
- Designed to eliminate fuel-related injector failure issues common to Powerstroke diesels
- Ultra-clean installation with ORB fittings, black anodized 6061 aluminum fittings, and black fuel line
- Durable 6061 T-6 billet aluminum construction backed by the FASS limited lifetime warranty
- Engineered specifically for 2023-2024 Ford Powerstroke 6.7L Truck/SUV applications
Quickview
-
- Flows 220 gallons per hour and supports up to 900 HP on the 2023-2024 Ford Powerstroke 6.7L
- 2-micron filtration plus a built-in water separator helps protect your injection system and injectors
- FASS patented air/vapor removal process targets the fuel-related causes of Powerstroke injector failure
- ORB fittings, black anodized 6061 aluminum fittings, and black fuel line deliver an ultra-clean install
- Durable 6061 T-6 billet aluminum build backed by the FASS limited lifetime warranty
Quickview
-
- Delivers 240 GPH at 65 psi and supports the 6.7L Powerstroke with enough fuel for up to 700 HP
- 2-micron filtration plus a built-in water separator to protect your injection system and injectors
- FASS patented air/vapor removal process strips damaging air and vapor from your fuel
- ORB fittings, black anodized 6061 aluminum fittings, and black fuel line for an ultra-clean install
- Durable 6061 T-6 billet aluminum construction backed by a FASS limited lifetime warranty
- Engineered specifically for 2023-2024 Ford Powerstroke 6.7L applications
Quickview
-
- Flows 110 gallons per hour at 80 psi, supporting the 5.0L Cummins for builds up to 600 HP
- Improved 2-micron filtration plus a built-in water separator to help protect injectors and extend injection system life
- FASS patented air/vapor removal process delivers consistent, air-free fuel to the engine
- ORB fittings, 6061 aluminum black anodized fittings, and black fuel line for an ultra-clean installation
- Constructed from durable 6061 T-6 billet aluminum and backed by a FASS limited lifetime warranty
- Engineered specifically for the 2016-2019 Nissan Titan XD Cummins 5.0L
Quickview
-
- Genuine FASS Fuel Systems part number WH-1004-3R engineered for dependable performance and long service life
- Heavy-duty 10 gauge conductor sized for the higher current demands of diesel fuel systems
- Direct-fit application for 2005-2018 Dodge diesel trucks
- Purpose-built engine wiring harness that eliminates guesswork versus generic harness wire
- Sold individually (Each), so you get exactly the harness your FASS setup needs
Quickview
-
- Delivers full voltage to your FASS pump to prevent the current drop-off common with OE wiring
- Includes an integrated relay for proper current management and dependable performance
- Complete kit with wire and wire connectors for a clean, correct installation
- Heavy-duty replacement engineered to improve fuel system performance and longevity
- Designed for fully adjustable Titanium Signature, Industrial, and Competition Series FASS systems
Quickview
-
- Rated at 2 microns absolute for superior water and contaminant separation in diesel fuel systems
- Drain-free design — the filter element itself traps the water for simpler, cleaner maintenance
- Genuine FASS Fuel Systems XWS1002 component built for Truck/SUV diesel applications
- Pairs with the PF3001XL, mounting on the pressure side of the system for correct operation
- Protects injectors and pump components, helping you avoid costly fuel system repairs
- Sold as each, so you can order exactly what your replacement job requires
Quickview
-
- Rated at 2 microns absolute for superior removal of water and fine contaminants from your diesel fuel
- Drain-free design traps water inside the filter element, making the fuel filter change simpler
- Genuine FASS Fuel Systems XWS3002 replacement, sold individually (Each)
- Engineered to mount on the pressure side of the system when paired with the required PF3001
- Direct upgrade path from discontinued FF-3003/FF-3010 and FS-1001/FS-1020 filters
- Built for Truck/SUV diesel fuel system applications
Quickview
-
- Rated at 2 microns absolute for aggressive filtration of your diesel fuel system
- Drain-free design traps water inside the filter element for cleaner, simpler service
- Extended-length element delivers added media capacity for demanding applications
- Designed to pair with the PF3001XL, with the XWS3002XL mounted on the pressure side
- Sold as Each, so you can order the exact quantity you need for your FASS system
- The correct replacement when upgrading from discontinued FF-3003/FF-3010 or FS-1001/FS-1020 filters
Quickview
-
- Removes water, dirt, and rust down to 10 microns to protect every diesel engine you fuel
- Over 99% water removal — field tested and laboratory proven
- Handles up to 25 gallons per minute for fast, efficient transfer fueling
- 1 inch-12 thread designed for transfer tanks and diesel storage tanks
- No drain needed — filter media positively traps water for simpler operation
Quickview
-
- No CEL Guarantee keeps your Camaro’s ECU happy when upgrading to a full AWE Cat-back Exhaust
- No tune required — retains factory AFM valve motor operation after installation
- Durable T304L Stainless Steel construction built for the exhaust environment
- Comes as a set of two with hardware included and a Fit Guarantee
- Voluntary Label: 50 State Legal for a compliant upgrade
- Purpose-built fitment for the 2016-2024 Chevrolet Camaro Coupe 6.2
Quickview
-
- Plug-and-play engine wiring harness — no tune required; plug them in, start it up, and drive away
- No CEL Guarantee: prevents the ECU from storing a soft code after exhaust valve removal
- Fit Guarantee ensures correct, confident installation on Audi, BMW, Mercedes-Benz, Porsche and more
- All necessary hardware included and supplied as a set of two
- Voluntary Label: 50 State Legal for peace of mind
Quickview
-
- Complete on-demand control to open and close your SwitchPath™ exhaust valves from a simple remote
- Intuitive push-button operation — ‘On’ to open, ‘Off’ to close for instant sound changes
- No tune required and hardware included for a clean, straightforward upgrade
- No CEL Guarantee means valve control without a check engine light
- Fit Guarantee for your Audi B9 3.0 AWD Coupe, Hatchback, or Sedan
- 50 State Legal Voluntary Label for added peace of mind
Quickview
-
- Open or close your exhaust valves on demand from inside the cabin with a simple push-button remote
- Works with both the stock exhaust and the appropriate AWE SwitchPath™ Exhaust
- Complete kit includes two remotes, wiring harness, control box, and mounting hardware
- No tune required, plus a Fit Guarantee and No CEL Guarantee for peace of mind
- Compact remote design fits easily on a keychain or in a cup holder
- Carries a Voluntary Label as 50 State Legal
Quickview
-
- Retains your factory Active Valve actuators after an exhaust upgrade, keeping the ECU happy and operation CEL-free
- Built from durable T304L stainless steel for strength and corrosion resistance
- Bolt-on installation with all necessary hardware included — no tune required
- Backed by AWE Tuning’s Fit Guarantee and No CEL Guarantee
- Designed specifically for the 2018-2023 Mustang GT 5.0 Coupe with factory Active Valve Performance Exhaust
- Carries a voluntary 50-State Legal label
Quickview
-
- Purpose-built to defeat wind buffeting in the Porsche 991, 981, and 718 so you can drive with the window down in comfort
- UV-stabilized injection-molded plastic with an unobtrusive, elegant design that complements Porsche styling
- Complete pair included — driver and passenger Foiler™ Wind Diffusers plus all mounting hardware
- Bolt-on, user-friendly installation with a Fit Guarantee and no tune required
- Voluntarily labeled 50 State Legal with a No CEL Guarantee
Quickview
-
- Machined from T6-6061 aircraft aluminum for lasting strength and precise fitment
- Ships with all the hardware needed to replace your old mount
- Perfect for AWE DTS rubber-mount owners or poly-mount users wanting to reduce ride rigidity
- No tune required and backed by a No CEL Guarantee
- 50 State Legal voluntary label and covered by AWE Tuning’s Fit Guarantee
Quickview
-
- T6-6061 aircraft aluminum construction for a rigid, durable drivetrain connection
- Delivers a more solid, connected driving feel — ideal for more than daily driving alone
- Works as an upgrade from rubber mounts or a replacement for a DTS with poly mounts
- Includes all hardware needed to replace the old mount
- No tune required and backed by a No CEL Guarantee
- 50 State Legal with an AWE Tuning Fit Guarantee
Quickview
-
- Genuine carbon fiber S-FLO cover adds a premium, functional look under the hood
- Directs cool outside air at the filter while keeping hot engine-bay air out
- No tune required and backed by a No CEL Guarantee for hassle-free installation
- Fit Guarantee for Audi Sport Utility 3.0 / 3.2 AWD — fits in the stock airbox cover’s place
- Includes all necessary hardware for a complete install
Quickview
-
- Eliminates excessive engine and transmission torsional movement for phenomenal throttle response and crisper, more precise shifts
- CNC machined in-house from T6-6061 aircraft aluminum, yet a lightweight 6 lbs
- Bolts to existing factory mounting points with no adjustments or modifications and included hardware
- Choose a polyurethane mount for maximum solidity, or run both poly and rubber mounts for daily-plus-track versatility
- Fits alongside any exhaust on the market with 100% fit and zero vibration in standard form
- No tune required, No CEL Guarantee, Fit Guarantee, and 50 State Legal labeling
Quickview
-
- Delivers crisper, more precise shifts and sharper throttle response by eliminating drivetrain torsional movement
- CNC machined in-house from T6-6061 aircraft aluminum for a lightweight 6 lb, durable unit
- Rubber-mount design balances agile feedback with more comfort than poly mounts
- Bolts to factory mounting points with included hardware — no tune, adjustments, or modifications required
- Clears any exhaust on the market with 100% fit, 0 vibrations, plus a No CEL Guarantee and Fit Guarantee
- Makes heel-and-toe downshifting noticeably easier and more repeatable
Quickview
Showing 1369–1392 of 15427 results
