Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
Banks 
BBK 
Corsa 
Dinan 
Edelbrock 
Edge 
Flowmaster 
Holley 
Injen 
JLT 
S&B 
Sinister 
Sniper Motorsports 
Takeda 
Volant Latest Products
-
Injen IS Short Ram Cold Air Intake System - IS1401 INJ-IS1401
$282.43
-
Edelbrock Harmonic Damper #15719 2014-15 For Chevy Corvette Base Model-Wet Sump - EDB-15719
$815.95
-
AIRAID Throttle Body Spacer- 450-603
$157.99
-
aFe Power AFE-30-10264-p Magnum FLOW OE Replacement Air Filter Cadillac ATS/CTS 13-19/Chevrolet Camaro 16-23 L4/V6
Price range: $71.00 through $76.00
-
Flowmaster Delta Boost Module - FLM-18111
$300.95
Image
Product
Price
-
- This Stage-2’s open-element design puts your engine in the spotlight. Its massive air filter draws attention when the hood is open and, when under power in Sport mode, it unleashes an aggressive tone.
- Dyno-Proven Gains up to +12 HP & +10 Lbs. x Ft. TQ
- Outflows Factory Intake by 49%
- Measured Flow: 550 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
Quickview
-
- Dyno-Proven Gains up to +8 HP & +14 Lbs. x Ft. TQ
- Outflows Factory Intake by 36%
- Measured Flow: 685 CFM @ 7″ H2O
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Open-Element Design
- Incorporates the Factory Air Inlet Scoop
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
Quickview
-
- Dyno-Proven Gains up to +13 HP & +12 Lbs. x Ft. TQ
- Outflows Factory Intake by 26%
- Measured Flow: 610 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Utilizes Factory Mounting Locations for a Fast and Easy Installation (Roughly 30 Minutes)
Quickview
-
- +18lbs. x ft. TQ & +7 HP
- Outflows Factory Intake by 15%
- Measured Flow: 490 CFM @ 7″ H20
- Seals to hood when closed to reduce intake air temperature
- Innovative Filter-to-Housing Interface for Easy Installation
Quickview
-
- Dyno-Proven Gains up to +22 HP and +25 Lbs. x Ft. TQ
- Outflows Factory Intake by 37%
- Measured Flow: 590 CFM @ 7″ H20
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
Quickview
-
- Dyno-Proven Gains up to +6 HP & +6 Lbs. x Ft. TQ
- Outflows Factory Intake by 5%
- Measured Flow: 220 CFM @ 7″ H20
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
Quickview
-
Magnum FORCE AFE-54-13050R-p Stage-2 Cold Air Intake System Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)
- Dyno-Proven Gains up to +14 HP & +14 Lbs. x Ft. TQ
- Outflows Factory Intake by 24%
- Measured Flow: 335 CFM @ 7″ H20
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
Quickview
-
- Dyno-Proven Gains of +9 HP and +8 Lbs. x Ft. TQ
- Outflows Factory Intake by 67%
- Measured Flow: 460 CFM @ 7″ H20
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Connects to the Factory Air Inlet Scoop with No Additional Hardware
Quickview
-
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
Quickview
-
- Dyno-Proven Gains up to +8 HP & +14 Lbs. x Ft. TQ
- Outflows Factory Intake by 36%
- Measured Flow: 685 CFM @ 7 IN H2O
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
Quickview
-
- Dyno-Proven Gains up to +12 HP & +15 Lbs. x Ft. TQ
- Outflows Factory Intake by 31%
- Measured Flow: 525 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
Quickview
-
- Dyno-Proven Gains up to +15 HP and +14 Lbs. x Ft. TQ
- Outflows Factory Intake by 47%
- Measured Flow: 730 CFM @ 7″ H20
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
Quickview
-
- Dyno-Proven Gains up to +17 HP & +18 Lbs. x Ft. TQ
- Outflows Factory Intake by 38%
- Measured Flow: 550 CFM @ 7″ H20
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
Quickview
-
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and a Silicone Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
Quickview
-
- Dyno-Proven Gains up to +35 HP & +61 Lbs. x Ft. TQ
- Outflows Factory Intake by 34%
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
Quickview
-
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and a Silicone Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
Quickview
-
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
Quickview
-
- Outflows Factory Intake by 24 Percent
- 3.5 in. Mandrel Bent Wrinkle Black Aluminum Intake Tube
- Improved Volumentric Efficiency For Better Performance
- Powdercoated 1-Pc. Heat Shield
- 3 Angle Filter Adaptor Increases Air Velocity
- Pro 5R Oiled Air Filter
- No Cutting or Modifications Required
- Fast Installation
Quickview
-
- Balanced Intake Tube Pressures
- Maximizes Air Flow and Velocity
- Powdercoated One Piece Steel Housing
- Dual Pro 5R Pre-Oil Air Filters
- No Cutting Or Drilling on Factory Parts
- Faster Installation
Quickview
-
- Outflows Factory Intake By 71%
- 3 in. Mandrel Bent Aluminum Intake Tubing
- Wrinkle-Black Finish
- 1-Piece Powdercoat Heat Shield Utilizes Stock Mounting Locations
- Incl. Dual Pro 5R Pre-Oiled Air Filters
- No Cutting Or Drilling On Factory Parts For Faster Installation
Quickview
-
- Uses 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
- Washable And Reusable Air Filter
- Tuned Intake Tube
Quickview
-
- Outflows Factory Intake By 92%
- Uses Pro 5R Filter For Maximum Air Flow
- 1-Piece Powdercoat Heat Shield Utilizes Stock Mounting Locations
- CAD-Designed Roto-Molded Intake Tube
- No Cutting Or Drilling On Factory Parts For Faster Installation
Quickview
Showing 1393–1416 of 1885 results
