Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
BBK 1749 COLD AIR INTAKE REPLACEMENT HARDWARE KIT
$59.99 $69.99 -
AEM-21-728 Cold Air Intake System
Price range: $419.99 through $479.99
-
25-26 Ram 1500 (Crew Cab Pickup - 3.0) Exhaust System Kit
$1,913.09
-
aFe Power AFE-50-70083R-p Momentum GT Cold Air Intake System BMW M3/M4 (G80/82/83) 21-22 L6-3.0L (tt) S58
Price range: $784.00 through $808.00
-
Flowmaster Outlaw Cat-back Exhaust System
$1,277.60
Image
Product
Price
-
- Three chamber Delta Flow® design with an internal tuning chamber cuts interior resonance for a comfortable, moderate cabin sound
- Delivers the same performance and exterior tone as a two chamber muffler, but with less drone
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fitment with a 3.00″ inlet and 9.75″ body width — ideal for classic muscle car builds
- Trusted 50 Series Delta Flow performance from Flowmaster for your custom exhaust system
-
- Delta Flow® technology delivers a mellow tone plus improved power and throttle response on 4 and 6 cylinder engines
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fit with a 2.25″ inlet makes it adaptable to a wide range of builds
- Moderate sound level tunes deeper when paired with a larger diameter tailpipe or tip
- High-temperature paint finish stands up to real-world exhaust heat
-
- Single-chamber design with Flowmaster Delta Flow technology for maximum race performance
- Aggressive sound level that still cuts noise noticeably compared to open headers
- 3.50-inch inlet diameter built for high-flow race applications
- Universal fitment makes it a versatile choice for custom race exhaust builds
- Durable high-temperature paint finish stands up to demanding exhaust heat
- Uses new hangers (not included) and exhaust tips sold separately for a fully custom setup
-
- Delta Flow® technology delivers strong performance flow with low interior resonance and no annoying drone
- Aggressive, deep sound of the Original 40 Series in a larger Super 40 case profile
- Built from 16-gauge aluminized steel and fully MIG welded for maximum durability
- High-temperature paint finish holds up to real exhaust heat
- Universal fitment with a 2.50″ inlet and offset same-side outlet for flexible Street/Strip builds
-
- Flowmaster Super 40 Series with Delta Flow® technology delivers aggressive, deep and powerful sound
- Larger case profile balances performance flow with reduced low interior resonance
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish adds extra protection under the vehicle
- Universal fitment with dual 2.50 inlets and dual outlets for flexible exhaust builds
- Ideal aggressive-tone upgrade for late model muscle car exhaust systems
-
- Flowmaster Delta Flow technology delivers maximum performance for race applications
- Single chamber race design with a large 4.00-inch inlet for high-flow builds
- Aggressive sound with a noticeable dB reduction over open headers
- Durable high-temperature paint finish stands up to exhaust heat
- Universal fitment lets you integrate it into a custom or cat back exhaust system
-
- Aggressive, high-volume tone built for racing applications with no set decibel limit
- Large 4.00-inch inlet diameter promotes maximum exhaust flow for performance builds
- Universal fitment connects directly to header collectors or into an existing exhaust system
- High-temperature paint finish holds up to the heat of demanding exhaust duty
- Part of Flowmaster’s Outlaw Series — a great match for classic muscle car builds
- Pair with the exhaust tips of your choice (sold separately) to customize your look
-
- Aggressive, race-inspired sound level with no set decibel limit — built to be heard
- 3.00-inch inlet diameter promotes strong exhaust flow for performance builds
- Universal fitment connects directly to header collectors or into an existing exhaust system
- High-temperature paint finish stands up to demanding exhaust heat
- Versatile choice for late model muscle cars and dedicated racing applications
-
- Full 409 stainless steel construction for lasting durability and corrosion resistance
- 50 Series HD muffler with large 4.00-inch internals and a built-in resonator to keep interior sound to a minimum
- Deep, moderate-aggressive exhaust tone that stands out outside the vehicle
- Direct-fit design attaches to factory hanger locations for a quick, at-home installation
- Fits 2009-2024* (*Classic body) RAM 1500 trucks with the 5.7L Hemi and factory dual tailpipes
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Straight-through 3.0-inch stainless steel perforated core delivers smooth flow and a deep, mellow tone
- Fully MIG-welded “bright” 409 stainless steel with embossed Flow FX logos for show-quality durability
- Universal 3.00-inch inlet and outlet fits Chevrolet, Dodge, Ford, GMC and many custom exhaust systems
- Reversible internal flow design installs in either direction to suit your vehicle
- Compact 6-inch diameter body and 20.00-inch length ideal for large displacement gas engines
- Moderate performance tone that stands apart from traditional chambered mufflers
-
- Dyno-proven gains of 18 hp and 14 ft/lbs at the rear wheels for real performance you can feel
- Direct-fit design connects to the factory dual tail pipes and reuses all factory hangers for an easy at-home install
- 409 stainless steel construction with 3.00-inch mandrel-bent pipes for durability and optimum flow
- Flow FX Series muffler delivers an aggressive-to-moderate exhaust tone with dual outlets
- Includes clamps, hangers, hardware, and installation instructions, backed by Flowmaster’s 1-Year Limited Warranty
-
- Delivers a very deep, aggressive Flowmaster sound inside and outside your RAM 1500
- Direct-fit, bolt-on design uses factory hanger locations for a quick at-home install
- Built from durable 409 stainless steel for long-term corrosion resistance
- 3.00-inch mandrel-bent inlet and dual 2.50-inch outlets that connect to factory dual tailpipes
- Engineered specifically for 2009-2024* (Classic body) RAM 1500 with the 5.7L Hemi
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the classic, aggressive Flowmaster tone inside and out — the Original 40 Series sound
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish built to withstand exhaust heat
- Universal fitment with a 2.25″ inlet — ideal for street rod and custom builds
- Proven chambered performance muffler design from the Original 40 Series
-
- Adds up to 14 hp and 12 lb-ft at the rear wheels for power you can feel
- 409 stainless steel muffler and tubing built for years of corrosion-resistant service
- Flow FX straight-through design delivers an aggressive yet moderate tone
- Direct-fit assembly uses all factory hangers for an easy at-home install
- Includes hangers, clamps, hardware, and instructions, plus a Lifetime Limited Warranty
- Fits 2025-2026 Ram 1500 3.0L Standard Output in both 2WD and 4WD
-
- Aggressive muscle car sound both inside and outside the vehicle from Flowmaster’s chambered cross-flow design
- Same-end inlet and offset outlet route cleanly in front of the axle for a side-exit style system
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with a 2.50-inch inlet for flexible custom and replacement builds
- Delivers a classic layout similar to AAR Cuda exhaust systems
-
- Dyno-proven max gains of 13 hp and 11 lb-ft at the rear wheels for better acceleration and towing
- Built entirely from 409 stainless steel for years of trouble-free, corrosion-resistant service
- Straight-through Flow FX absorption muffler delivers great sound with no drone at a moderate level
- Direct-fit design uses all factory hanger locations and hardware for easy at-home installation
- Fits 2014-2026 RAM 2500/3500 6.4L HEMI trucks in both 2WD and 4WD
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Large case and internal tuning chamber deliver maximum sound control with a quiet, mild interior tone
- Built for heavy-duty use — full-size trucks, SUVs, RVs, and tow vehicles
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- Supports mileage and power gains even under heavy loads
- 3.50-inch inlet with universal fitment for flexible exhaust builds
- High-temperature paint finish adds extra protection
-
- Direct-fit replacement for 2019-2024 and 2026 RAM 1500 new body style trucks with the 5.7L Hemi
- Race-proven Outlaw muffler delivers a deep, aggressive interior and exterior tone
- Full 409 stainless steel construction with mandrel-bent tubing for durability and flow
- Installs in under 30 minutes using factory hanger locations, with easy-to-follow instructions included
- Fits all 2/4 wheel drives and wheelbases with either factory single or dual tailpipes
- 3.00-inch inlet, outlet, and main piping for maximum performance without losing Hemi power
-
- Delivers the loudest, most aggressive sound in Flowmaster’s Super series lineup via a single chamber design
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Patented Delta Flow® technology engineered for maximum performance
- 2.50-inch inlet with universal fitment for Plymouth 225 through 440 muscle car builds
- High-temperature paint finish stands up to the heat
- Ideal off-highway upgrade for enthusiasts building an aggressive performance exhaust
-
- Flowmaster 50 Series Delta Flow® three chamber design cuts interior resonance while keeping an aggressive exterior tone
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 2.25″ inlet fitment makes it ideal for custom and replacement exhaust builds
- Moderate sound level tuned for comfortable street driving and strip use
- High-temperature paint finish stands up to heat and the elements
- Adaptable across many platforms — exhaust tips sold separately so you control the final look
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, highest-performing street tone in a four-inch case
- 16-gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50-inch inlet, ideal for late-model muscle car and custom builds
- Compact 9.50-inch body width with a protective high-temperature paint finish
- Rich, powerful, aggressive sound level tuned for the street
-
- Three chamber Delta Flow® design reduces interior resonance while keeping the same exterior tone as the two chamber version
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet makes it a versatile choice for custom exhaust builds
- Moderate sound level tuned for comfortable street/strip driving without excessive cabin drone
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delta Flow® two-chamber design with Delta deflectors boosts scavenging for better performance and reduced interior sound
- Milder exterior tone and less interior resonance than the standard 40 Series, while keeping an aggressive note
- Rugged 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability
- 3.00″ inlet with dual outlet configuration for strong exhaust flow
- Universal fitment covers Chevrolet, Ford, and GMC 305, 350, 351, and 460 applications
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delivers the iconic aggressive Flowmaster tone inside and out
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with 2.50″ dual inlet and dual outlet for flexible builds
- Ideal aggressive muffler for street rod and custom exhaust systems
Showing 169–192 of 246 results
