Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Magnum FORCE AFE-51-12662-p Stage-2 Cold Air Intake System Jeep Grand Cherokee (WK2) 12-21 V8-6.4L HEMI
$433.40
-
Injen Technology SuperNano-Web Air Filter - X-1069-BB INJ-X-1069-BB
$99.54
-
18-24 Audi S5 (Coupe - 3.0) Exhaust System Kit
$3,170.73
-
No-Drop Series Plus Fuel System for 2020-2023 Silverado/Sierra Duramax 6.6L (900-1200hp) FASS
$1,122.24
-
2015 Jeep Wrangler (3.6) Computer Chip Programmer
$2,097.85
Image
Product
Price
-
- Aggressive, deep exhaust tone powered by the proven Flowmaster Outlaw series muffler
- Max dyno gains of 15 hp and 20 lb-ft at the rear wheels on the 5.3L Silverado/Sierra 1500
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- One of Flowmaster’s most aggressive tones from the Super 10 Series muffler — loud inside and out
- Mandrel-bent 409 stainless steel 3.00-inch tubing and dual tailpipes for lasting performance and flow
- Two included tailpipe exit configurations: straight under the bumper or behind the rear wheels for towing
- Large 4.00-inch black ceramic-coated stainless steel tips with embossed logo
- CARB compliant and emissions-legal, with a bolt-on fit using factory hangers and included hardware
- Fits 2021-2026 Ford F-150 2.7L, 3.5L, and 5.0L in 2WD or 4WD, backed by a Lifetime Limited Warranty
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Aggressive Outlaw-series tone that gives your Bronco a bold, unmistakable voice
- Dyno-proven gains of up to 14 hp and 16 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom rear-end look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive tone under throttle with a mild idle and no drone, thanks to the tuned 60 Series style muffler
- Proven performance with maximum dyno gains of 19 hp and 19 lb-ft at the rear wheels
- Durable, high-flow 3.00-inch mandrel-bent 409 stainless steel construction
- Polished 3.00-inch stainless tip with embossed logo for a custom finished look
- Easy bolt-on install using included hardware, new hangers, and factory mounting locations
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the loudest, most aggressive sound in Flowmaster’s Super series lineup via a single chamber design
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Patented Delta Flow® technology engineered for maximum performance
- 2.50-inch inlet with universal fitment for Plymouth 225 through 440 muscle car builds
- High-temperature paint finish stands up to the heat
- Ideal off-highway upgrade for enthusiasts building an aggressive performance exhaust
-
- Flowmaster 50 Series Delta Flow® three chamber design cuts interior resonance while keeping an aggressive exterior tone
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 2.25″ inlet fitment makes it ideal for custom and replacement exhaust builds
- Moderate sound level tuned for comfortable street driving and strip use
- High-temperature paint finish stands up to heat and the elements
- Adaptable across many platforms — exhaust tips sold separately so you control the final look
-
- Adds up to 11 HP and 10 LB.-FT. at the rear wheels with the deep, aggressive Super 40 Series muffler tone
- Mandrel-bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Choose side-exit or rear-exit configurations to customize your F-150’s look
- 3.5-inch polished stainless steel tips with embossed logo for a classic performance finish
- Bolts on using factory hanger locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, highest-performing street tone in a four-inch case
- 16-gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50-inch inlet, ideal for late-model muscle car and custom builds
- Compact 9.50-inch body width with a protective high-temperature paint finish
- Rich, powerful, aggressive sound level tuned for the street
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-verified gains of 6 hp and 7 lb-ft at the rear wheels with an aggressive Outlaw exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability while supporting future engine upgrades
- Over-axle routing gains 2.0 inches of axle clearance for better suspension travel on modified, off-road Broncos
- Dual 4.00-inch black chrome tips with embossed logo add a custom look to the 2021-2026 Ford Bronco 4-door
- Includes new hangers and all necessary hardware, using factory mounting locations for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Three chamber Delta Flow® design reduces interior resonance while keeping the same exterior tone as the two chamber version
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet makes it a versatile choice for custom exhaust builds
- Moderate sound level tuned for comfortable street/strip driving without excessive cabin drone
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delta Flow® two-chamber design with Delta deflectors boosts scavenging for better performance and reduced interior sound
- Milder exterior tone and less interior resonance than the standard 40 Series, while keeping an aggressive note
- Rugged 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability
- 3.00″ inlet with dual outlet configuration for strong exhaust flow
- Universal fitment covers Chevrolet, Ford, and GMC 305, 350, 351, and 460 applications
- High-temperature paint finish adds extra protection against heat and the elements
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Dyno-proven maximum gains of 6 hp and 7 lb-ft at the rear wheels
- Aggressive Outlaw-series muffler delivers a bold, deep exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Three chamber Delta Flow® design with an internal tuning chamber reduces interior resonance while keeping an aggressive exterior tone
- 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability and heat resistance
- Moderate sound level makes it ideal for a Street/Strip vehicle you can still drive daily
- 3.00″ inlet diameter supports strong performance exhaust flow
- Direct fitment for Ford and Plymouth 225, 273, 318, 361, 383, 413, 415, 426, and 440 engines
- High-temperature paint finish adds extra protection against heat and the elements
-
- Adds up to 9 hp and 9 lb-ft at the rear wheels over the stock exhaust
- Aggressive Outlaw series sound, heard both inside and outside the truck
- Dual tailpipes configure straight-rear or side-exit — ideal for towing
- Includes stainless Outlaw muffler and polished 4.00-inch embossed tips
- CARB-compliant, emissions-legal bolt-on using factory hangers
- 409 stainless mandrel-bent piping backed by a Lifetime Limited Warranty
-
- Delivers the deep, powerful sound of the Original 40 Series with reduced interior resonance thanks to Delta Flow® technology
- Larger case profile shines on forced induction and high-horsepower vehicles, balancing performance and sound
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Race-derived Super 40 Series design engineered from Flowmaster’s Top Ten race muffler lineup
- Universal fitment with a 2.50-inch inlet makes it ideal for street rod and custom exhaust builds
-
- Deep, aggressive Outlaw series sound with increased performance over the restrictive factory exhaust
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Direct-fit design uses factory hangers and includes all hardware for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delta Flow® three chamber design with an internal tuning chamber cuts interior resonance while keeping an aggressive exterior tone
- Fully MIG welded 16 gauge 409S stainless steel for long-lasting durability
- Moderate sound level delivers a serious note without wearing you out on the highway
- Universal 2.25″ inlet fitment gives you flexibility for custom exhaust and cat back system builds
- High-temperature paint finish adds protection against heat and the elements
- Trusted Flowmaster 50 Series performance in a versatile muffler for late model muscle cars
Showing 913–936 of 1011 results
