Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
Banks 
BBK 
Corsa 
Dinan 
Edge 
FASS Fuel Systems 
Flowmaster 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Takeda 
Volant Latest Products
-
AIRAID Performance Air Intake System- 400-109
$449.99
-
aFe Power AFE-90-51401B Magnum FLOW Pro 5R Air Filter Restore Kit w/ Black Oil
$26.00
-
Dinan Cold Air Intake - 2009-2010 BMW 335i
$1,299.95
-
aFe Power AFE-57-10011R-p Track Series Stage-2 Carbon Fiber Intake System RAM 1500 19-22 V8-5.7L HEMI
Price range: $1,038.78 through $1,070.10
-
AIRAID Performance Air Intake System- 255-334
$419.99
Image
Product
Price
-
- Converts your AWE Center Muffler Delete into a full valved AWE SwitchPath™ Exhaust
- Sheds up to 48 lbs versus the 65 lb factory exhaust — the complete system weighs just 17 lbs with tips
- T304L stainless steel with 0.65″ wall delivers a deep, refined exotic tone even with valves closed
- Retains factory valve operation, evolving from sophisticated street car to roaring Cup Car
- No tune required, plus a No CEL Guarantee and AWE Fit Guarantee
- 50 State Legal for the 2016-2019 Porsche 911 (4.0)
-
- Valved SwitchPath™ Mufflers replace the rear Track Edition straight sections for on-demand sound control
- Retains factory valve behavior and on-board controls — no aftermarket switch needed
- Durable T304L Stainless Steel construction with a 3-inch tubing diameter
- No tune required, backed by a No CEL Guarantee for a worry-free install
- Fit Guarantee and 50 State Legal voluntary labeling for the 4.0 RWD AMG sedan
-
- Valved SwitchPath™ Mufflers let you take full control of your AMG’s sound on demand
- Retains factory valve behavior and on-board controls—no aftermarket switches needed
- Durable T304L Stainless Steel construction with 3-inch tubing
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- AWE Fit Guarantee for a precise, bolt-on fit on the Coupe 4.0 RWD
- 50 State Legal voluntary labeling for straightforward compliance
-
- SwitchPath™ Conversion Kit pairs a bespoke muffler with a valved straight section for tone you control
- Factory valve behavior and interior control retained through Audi Drive Select
- Built from durable T304L stainless steel with a 2.5-inch tubing diameter
- 50 State Legal with a No CEL Guarantee and No Tune Required
- Backed by AWE Tuning’s Fit Guarantee for a confident, application-specific install
-
- Valved conversion kit with a bespoke driver’s-side muffler and a valved passenger’s-side straight section for a purpose-built sound
- Retains factory valve behavior controlled through your driving modes—quiet when you want it, aggressive when you don’t
- Built from durable T304L stainless steel with 2.5-inch tubing sized for the Golf R 2.0 AWD platform
- 50 State Legal with a No CEL Guarantee and no tune required for a hassle-free install
- Backed by an AWE Fit Guarantee, engineered specifically for the 2015-2017 Golf R Base hatchback
- Add the AWE SwitchPath™ Remote (sold separately) for complete on-demand control over the exhaust valve
-
- Valved conversion kit lets you retain factory valve behavior and control your sound through driving modes
- Premium T304L stainless steel construction for lasting corrosion and heat resistance
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- 50 State Legal voluntary labeling plus an AWE Fit Guarantee for your Audi/VW 2.0 AWD
- Bespoke driver’s-side muffler paired with a valved passenger’s-side straight section
- Pairs with the optional AWE SwitchPath™ Remote for complete on-command valve control
-
- Valved tip merges let you control exhaust volume through the factory on-board controls
- Track-to-SwitchPath™ Conversion delivers switchable sound — aggressive or refined on demand
- Durable T304L Stainless Steel construction with 3-inch tubing for high-performance flow
- No tune required and backed by a No CEL Guarantee for a clean, hassle-free install
- 50 State Legal and covered by the AWE Fit Guarantee for the 18-23 BMW M5 4.4 AWD Sedan
-
- 3” straight-through Cat Back with a bespoke mid pipe resonator for an aggressive, drone-free exhaust note
- Trail Edition routing ends right after the rear axle to maximize ground clearance off-road
- Built from durable T304L Stainless Steel and proudly USA-made
- No tune required plus a No CEL Guarantee for a clean, hassle-free install
- 50 State Legal and backed by an AWE Fit Guarantee
- Purpose-built fitment for 2018-2026 Jeep Wrangler Sport Utility 3.6 4WD
-
- USA-made T304L Stainless Steel Cat Back system built for durability on and off the trail
- Bespoke mid pipe resonator delivers a drone-free, best-in-class trail exhaust note
- 3″ straight-through design ends after the rear axle for maximum ground clearance
- No tune required and no valves — engineered to perform right out of the box
- Backed by AWE’s Fit Guarantee and No CEL Guarantee, with a 50 State Legal label
- Purpose-built fitment for the 12–17 Jeep Wrangler 3.6L 4WD Sport Utility
-
- Converts your existing AWE Touring Edition into an AWE Track Edition exhaust system
- Built from durable T304L Stainless Steel with 3-inch tubing for strong flow
- No tune required — install and drive with the No CEL Guarantee for a clean dash
- Backed by AWE Tuning’s Fit Guarantee for precise, model-specific fitment
- 50 State Legal, purpose-built for the 22-26 Audi S3 Sedan 2.0 AWD
-
- Converts your Trail Edition Gladiator to AWE’s Single Side-Exit Tread Edition with a driver-side rear exit
- Built from durable T304L stainless steel for lasting corrosion resistance
- Finished with a 5-inch double-walled, straight-cut tip in stealthy Diamond Black
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- 50 State Legal and covered by AWE’s Fit Guarantee for the 2020-2026 Jeep Gladiator
-
- Converts your Gladiator Trail Edition to AWE’s Dual Outlet Tread Edition with a dual rear exit behind both tires
- T304L stainless steel construction with 3-inch tubing for durability and corrosion resistance
- Two 5-inch double-walled, straight-cut tips in a stealthy Diamond Black finish
- No tune required and no valves — a clean, straightforward conversion
- Backed by a Fit Guarantee and No CEL Guarantee, plus a 50 State Legal voluntary label
-
- Track Edition tuning gets rowdy in the mid-range and at cruising speeds for maximum aggression
- Built from durable T304L Stainless Steel with full 3″ tubing and an X-pipe design
- Twin 7.4″ Diamond Black 180mm RS-style oval tips with stamped AWE logo
- No tune required, plus a No CEL Guarantee and AWE Fit Guarantee for an easy, worry-free install
- Conversion Kits available to switch between Touring and Track Edition character
- 50 State Legal voluntary labeling and precise 2021-2024 Audi RS5 (2.9) fitment
-
- Track Edition tuning delivers a rowdy, aggressive mid-range and cruising note from your RS5’s 2.9L twin-turbo
- Full cat back exhaust system in durable T304L Stainless Steel — no tune required
- Diamond Black 180mm RS-style oval tips with stamped AWE logo for a bold finish
- Backed by AWE’s Fit Guarantee and No CEL Guarantee for a confident, bolt-on install
- X-pipe and 3″ tubing engineered specifically for the 21-25 Audi RS5 Sportback (B9.5)
- Conversion Kits available to switch between Touring and Track Edition character
-
- Converts your Tread Edition tailpipe to a Trail Edition turndown for maximum exhaust clearance off-road
- Trail Edition turndown ends right after the rear axle, tucked up out of harm’s way
- Built from durable T304L stainless steel with 3-inch tubing
- No tune required and backed by a No CEL Guarantee for a simple install
- 50 State Legal and covered by AWE Tuning’s Fit Guarantee
- Purpose-built for the 2020-2026 Jeep Gladiator
-
- Converts your AWE Touring Edition Cat Back into a Track Edition by swapping the rear 180 Technology sections for straight sections
- Built from durable T304L Stainless Steel with 3-inch tubing for lasting performance
- No tune required and backed by a No CEL Guarantee for a hassle-free upgrade
- Fits 2020-2026 Corvette Convertible and Coupe, 6.2L, AWD or RWD, with AWE’s Fit Guarantee
- 50 State Legal voluntary labeling for confident street use
-
- Converts your existing AWE Touring Edition Cat Back into a more aggressive Track Edition
- Swaps in Track Edition straight sections in place of the rear 180 Technology® sections
- Made from durable T304L Stainless Steel with 3-inch tubing
- No Tune Required and backed by a No CEL Guarantee for a clean install
- Carries a 50 State Legal voluntary label and an AWE Fit Guarantee
- Purpose-built for the 14-21 Jeep Grand Cherokee 6.2/6.4 AWD
-
- Converts your existing AWE Touring Edition Cat Back into a Track Edition by swapping the rear 180 Technology sections for straight sections
- Built from durable T304L Stainless Steel with 3″ tubing for free-flowing performance
- 50 State Legal voluntary label with No Tune Required and a No CEL Guarantee
- Backed by AWE’s Fit Guarantee for the 14-21 Grand Cherokee 6.2 / 6.4 AWD
- Purpose-engineered for a more aggressive Track Edition tone without replacing the whole system
-
- Turns your existing AWE Touring Edition Cat Back into a full Track Edition setup
- Premium T304L Stainless Steel construction with 3-inch tubing for durability and flow
- No tune required and no valves — a clean, straightforward upgrade
- No CEL Guarantee and 50 State Legal voluntary label for confident, compliant driving
- Backed by AWE Tuning’s Fit Guarantee for a precise install
- Purpose-built for the 2018-2023 Mustang Coupe 5.0 RWD
-
- Full T304L stainless steel cat-back exhaust system built for the 11-26 Dodge Durango 3.6L and 5.7L
- Track Edition tuning with integrated H-pipe and bullet-style resonators for a raw, rowdy sound
- Dual 3″ tubing to dual slash-cut, double-walled 5″ Chrome Silver tips
- No tune required and 50 state legal for a hassle-free, compliant install
- Backed by AWE’s Fitment Guarantee, No Check Engine Light Guarantee, and Lifetime Warranty
-
- Handcrafted from US-made 3″ T304L stainless steel for lasting durability and corrosion resistance
- Straight-through, valveless Cat Back design with a bespoke AWE resonator for tuned aggression
- Included BashGuard™ high-tuck option with a .125″ reinforced stainless ring for trail use
- True modularity fits all Broncos — 2.3T, 2.7TT, 2-door and 4-door — with door-length adapters included
- No tune required, 50 State Legal, and backed by a Fit Guarantee plus No CEL Guarantee
- Single 5″ Chrome Silver tip with room for various tip options
-
- Handcrafted from US-made 3″ T304L stainless steel for lasting durability and corrosion resistance
- BashGuard-only exit tucks high above the tow hooks for maximum off-road clearance and protection
- Modular design fits 2.3T and 2.7TT Broncos in both 2-door and 4-door 4WD configurations
- Bespoke AWE resonator adds an aggressive yet appropriate exhaust tone
- No tune required, 50 State Legal, and backed by AWE’s No CEL Guarantee
- Covered by AWE’s Perfect Fitment Guarantee and Lifetime Warranty
-
- Handcrafted from US-made 3″ T304L stainless steel for premium durability and flow
- Straight-through Cat Back design with a bespoke AWE resonator for controlled aggression
- Included BashGuard™ with .125″ reinforced stainless ring delivers high-tuck trail clearance
- Modular fitment with included adapters covers both 2-door and 4-door Broncos (2.3T & 2.7TT, 4WD)
- No tune required, No CEL Guarantee, and backed by AWE’s Fit Guarantee
- 50 State Legal with a stealthy single Diamond Black tip
-
- Handcrafted from US-made 3″ T304L stainless steel in a straight-through Cat Back design for lasting performance
- Fits all 2021-2026 Bronco models — 2.3T & 2.7TT, 2-door and 4-door 4WD — with an included model-bridging adapter
- Modular rear section swaps between dual Chrome Silver tips and the included high-tuck BashGuard™ with .125″ reinforced stainless ring
- Bespoke AWE resonator delivers an aggressive yet dialed-in tone
- No tune required, no valves, and backed by a Fit Guarantee and No CEL Guarantee
- 50 State Legal Voluntary Label for peace of mind
Showing 241–264 of 362 results
