Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AEM-28-20276 DryFlow Air Filter
$59.99
-
AIRAID Universal Air Filter- 723-242
$129.99
-
aFe Power AFE-31-10041-p Magnum FLOW OE Replacement Air Filter Mitsubishi Eclipse 95-05 L4-2.0L/2.4L
Price range: $71.00 through $76.00
-
Mishimoto MMRAD-HE-01 Universal Air-to-Water Heat Exchanger – 3-Row
$264.95
-
Mishimoto R13244 Replacement Radiator for Chevy Silverado 6.6L
$281.95
Image
Product
Price
-
- Deep, aggressive sound from a matched pair of Super 44 Series mufflers with Delta Flow technology
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Bolt-on installation using factory hanger locations with all U-Bolt hardware and instructions included
- Emissions legal and CARB (California) compliant for street-legal peace of mind
- Dual tailpipes finished with long 2.50-inch polished 304 stainless steel tips for a show-car look
- Fits 1994-1997 Mustang GT and Cobra 4.6L or 5.0L coupes and convertibles
-
- Aggressive exterior tone with a moderate interior sound level for a bold yet livable ride
- Outlaw series stainless steel muffler with dual 2.50-inch mandrel-bent tailpipes for smooth flow
- Large 4.00-inch tips with embossed logo complete the aggressive look
- Bolt-on axle-back design uses factory hangers and includes all hardware for easy at-home install
- CARB compliant and emissions-legal, fitting 2012-2018 Jeep Wrangler JK 3.6L (2 and 4 door)
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Bolt-on, emissions-legal cat-back designed for 1994-1997 Mustang GT and Cobra with the 4.6L SOHC or 5.0L engine
- Delivers the iconic deep, aggressive 90s Mustang sound via a pair of Super 44 Series mufflers
- 2.50-inch aluminized steel mandrel-bent tubing for smooth, free-flowing performance
- Factory-style flanges and factory hanger locations make installation quick and easy
- CARB (California) compliant and emissions legal for street use
- Includes all necessary hardware and easy-to-follow instructions; fits coupes and convertibles
-
- Complete crossmember-back dual exhaust engineered specifically for 1964–1972 El Camino/Sprint V8, 2WD applications
- 2.50-inch mandrel-bent aluminized steel with a built-in H-pipe for equalized pressures, no deceleration backrap, and maximum power
- Super 50 Series mufflers deliver a deep, aggressive exterior tone with minimal interior drone
- 3.00-inch angle-cut polished stainless tips exit behind the rear wheels for an aggressive muscle-car look
- CARB compliant and includes all necessary parts and hardware for an easy fit
- Improves throttle response, power, and mileage like all Flowmaster systems
-
- Delivers improved throttle response, power, and mileage in a bolt-on cat-back upgrade
- Includes the 70 Series Big Block II muffler (P/N 53073) for a deep, mellow tone
- Mild, refined sound — moderate outside and mild-to-moderate inside the cab
- Turn-down tip exit routes exhaust away from your boat or trailer, ideal for towing
- 3.00-inch mandrel-bent aluminized steel with factory hangers for easy installation
- CARB (California) compliant and configured for 4WD Standard Cab / Long Bed trucks
-
- Delivers performance equal to or surpassing open pipe systems, proven at the dyno and track
- Dramatically reduces sound across the RPM range for a moderate tone without sacrificing flow
- Universal fitment with a 3.00″ inlet and 3.63″ outlet — ideal for custom high-flow builds
- Handles the toughest applications: street trucks, diesel pullers, RV pushers, and racing on dirt or asphalt
- High-temperature paint finish built to withstand demanding, high-heat race use
- Backed by Flowmaster’s Pro Series engineering for serious performance builds
-
- Delivers a deep, powerful, aggressive tone from a pair of Super 44 Series mufflers
- Mandrel-bent 2.50-inch aluminized steel pipes support improved throttle response, power, and mileage
- Bolts on using factory exhaust hangers with all necessary parts and hardware included
- Dual tailpipes exit straight out the back with a turn down at the lower valance for a clean look
- CARB (California) compliant and backed by a 3-year Limited Warranty on aluminized steel systems
- Fits 2WD Coupes and Convertibles, with an optional stainless steel version available
-
- Fully polished stainless steel with double-wall construction for lasting shine and durability
- Easy clamp-on installation — no welding required
- Bold 2-1/2 inch inlet to 3-1/2 inch round outlet for an aggressive step-up look
- Embossed Flowmaster logo and angle-cut styling for a premium finished appearance
- Universal mounting orientation fits 2.50 inch exhaust piping across many applications
- 13-inch length provides full, integrated coverage at the rear of the vehicle
-
- Fully polished stainless steel with double wall construction for lasting shine and durability
- Clamp-on installation means no welding — quick, straightforward upgrade
- Angle-cut round design with a 4-inch outlet for a bold, aggressive rear-end look
- Embossed Flowmaster logo delivers authentic, brand-backed styling
- Universal mounting orientation fits 3-inch tailpipes across a wide range of applications
- Sold individually so you can order exactly what your single or dual setup needs
-
- Deep, powerful sound from large-case Super 40 Series mufflers with a moderate-to-aggressive exterior tone and mild-to-moderate interior tone
- Improved throttle response, power, and mileage thanks to smooth mandrel-bent aluminized steel tubing
- Muscular looks with dual 2.50-inch tailpipes and dual 3.00-inch polished stainless steel tips
- Easy bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Complete 2.50-inch dual exhaust custom designed for 1964-1966 Ford Mustang (non-GT, hardtop, 2WD)
- Pair of 40 Series Delta Flow mufflers delivers a deep, powerful sound with moderately aggressive exterior and moderate interior tone
- 16-gauge aluminized steel with all mandrel-bent tubing and an H-pipe for improved throttle response, power, and mileage
- Polished stainless steel tailpipe tips that tuck up for maximum clearance and a show-car look
- Includes all necessary parts, hardware, and instructions for an easy install, backed by a 3-Year Limited Warranty
- CARB (California) compliant with U-bolt clamping for a secure, straightforward fit
-
- Gasket-free ball flange design creates a leak-free connection without an exhaust flange gasket or donut gasket
- Replaces typical three-bolt flange-type connections with a stronger, self-aligning collector joint
- Aluminized 16-gauge build with 3/8 header flange thickness for high-performance durability
- Inside diameter slip-fit ends (3.00 inlet, 2.50 outlet) make welding and fitment straightforward
- Reversible flange sold in pairs with bolts and studs included for a complete connection
- Works as an exhaust pipe repair kit alternative when rebuilding a leaky collector
-
- Universal U-Fit Dual kit with enough mandrel-bent tubing to fabricate a complete custom dual exhaust system
- Twelve 2.25-inch pieces plus four 2.00-inch crossover components for a fully tailored layout
- Durable 16-gauge Aluminized steel construction in a silver finish built to last
- Slip-fit design with U-Bolt clamping for easy adjustment during fabrication
- CARB (California) compliant, Emission Code 5
- Mix and match your own mufflers and tips (sold separately) for the exact sound and flow you want
-
- 2.50-inch mandrel-bent 16-gauge stainless steel tubing delivers maximum flow through smooth bends
- Dual configuration with long, polished 304 stainless steel tips for a bright, aggressive rear exit
- Pre-bent to tuck high in the chassis for good clearance and a straight-out exit under the rear bumper
- Engineered to pair with Side Inlet / Opposite Side Outlet mufflers like the Super 44 (842548) or 50 Series (842553)
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Universal U-Fit Dual kit lets you fabricate a complete custom dual exhaust system on street rods, muscle cars, and pickups
- Built from durable 16-gauge Aluminized steel with a clean silver finish for long-lasting corrosion resistance
- Includes twelve 2.50-inch tubing pieces plus four 2.00-inch crossover components in selected bend configurations
- Slip-fit design with U-Bolt clamping makes positioning and securing your exhaust routing straightforward
- CARB (California) compliant with Emission Code 5
- Mix and match your own mufflers and tips (sold separately) to dial in the exact sound and style you want
-
- Built from 2.50-inch mandrel-bent 16-gauge stainless steel for maximum flow and long-lasting durability
- Direct-fit, specific-fit design tucks up high for good clearance and exits straight-out under the rear bumper
- Engineered to pair with Side Inlet/Opposite Side Outlet mufflers like the Super 44 (842548) and Super 50 (852558)
- Backed by Flowmaster’s Lifetime Limited Warranty
- High-performance grade construction with a natural stainless finish and flat band clamping
-
- Dyno-proven power gains of +9 hp and +12 lb-ft at the rear wheels
- Durable 409 stainless steel construction with a Lifetime Limited Warranty
- Flow FX straight-through muffler delivers a moderate tone with maximum performance
- 4.50-inch black ceramic tips and dual side-exit design for an aggressive custom look
- Bolt-on install using factory hangers, with all hardware and instructions included
- CARB compliant (Emission Code 5) and legal in all 50 states
-
- Adds max dyno gains of 13 hp and 16 lb-ft of torque at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Flow FX muffler delivers an aggressive-to-moderate exhaust tone
- Larger 4.50-inch black ceramic-coated tip with embossed logo for a custom look
- Bolt-on install using factory hangers with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Flowmaster 10 Series Delta Force single-chamber muffler with Delta Flow® technology for maximum race performance
- Aggressive sound level built for racing applications with no set decibel limit
- Low-profile 3.0-inch body height makes undercar packaging and clearance easier
- 2.50-inch inlet with universal fitment for flexible custom exhaust builds
- High-temperature paint finish stands up to hard use
- Delivers a noticeable dB reduction compared to running open headers
-
- Deep, aggressive Flow FX muffler tone with increased performance over the restrictive factory exhaust
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and lasting durability
- Bolts on using factory hangers and included hardware for a quick, straightforward install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Delivers the original, aggressive Flowmaster tone inside and out
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish built to handle exhaust-system heat
- Universal fitment with 2.50-inch dual inlet, ideal for Street Rod and custom builds
- Compact 9.50-inch body width fits a wide range of exhaust routing projects
-
- Delivers a deep, rich tone with a mild sound level and less interior drone thanks to the larger case and Delta Flow® design
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fitment with a 2.25″ inlet plus dual inlet and dual outlet for flexible installs
- Sized for 4- and 6-cylinder engines and suited to trucks, SUVs, and high-performance builds
- Contributes to mileage and power gains while adding an aggressive, refined exhaust note
- High-temperature paint finish helps the muffler stand up to real-world heat
-
- Direct-fit cat-back designed specifically for 1992-1995 Chevy Blazer and GMC Jimmy 5.7L (4WD)
- Super 50 Series muffler delivers a deep, powerful tone with mild-to-moderate cabin sound and moderate exterior volume
- Full 3.00-inch mandrel-bent aluminized steel inlet and tailpipe for efficient exhaust flow
- Bolt-on installation using factory hanger locations, U-bolt clamps, and all necessary hardware included
- CARB compliant and emissions-legal, backed by Flowmaster’s 3-year Limited Warranty
- Angle-cut turn-down tip exits behind the right rear wheel for a clean, aggressive look
-
- Flowmaster Delta Flow technology delivers excellent power characteristics with maximum sound reduction
- 30 Series Delta Force design engineered to meet stringent track decibel requirements
- Aggressive sound level built for Street/Strip and race applications
- 3.50″ inlet diameter supports high-flow performance exhaust builds
- Universal fitment gives fabricators flexibility for custom exhaust system integration
- High-temperature paint finish stands up to exhaust heat
Showing 337–360 of 842 results
