Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Replacement Air Filter- 851-083
$104.99
-
aFe Power AFE-46-38005 Silver Bullet Throttle Body Spacer Kit Toyota Tundra 07-21/Sequoia 08-22 V8-4.6L/5.7L
$139.00
-
AIRAID Performance Air Intake System- 525-284
$449.99
-
Dodge (6.2) Computer Chip Programmer
$1,686.78
-
aFe Power AFE-52-74201-C-p Momentum Cold Air Intake System Chevrolet Corvette (C7) 14-19 V8-6.2L
Price range: $525.78 through $1,577.75
Image
Product
Price
-
- Adds real power with max dyno gains of 12 hp and 14 lb-ft at the rear wheels on the Tacoma 2.4L
- 409 stainless steel construction and a straight-through Flow FX muffler for lasting durability and moderate, aggressive sound
- High-clearance dual 2.5-inch mandrel-bent tailpipes exit driver side for better off-road departure angles
- Bolts to all factory hanger locations and connections for easy at-home installation with included hardware and instructions
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds a dyno-proven 9 hp and 14 lb-ft at the rear wheels for real performance gains
- Race-inspired Outlaw series muffler delivers an aggressive sound inside and out
- Durable 409 stainless steel with 3.0-inch mandrel bent pipes for better flow
- Bolt-on install using factory hangers, with instructions and all hardware included
- Dump-style turn-down tip improves ground clearance for off-road driving
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Signature Series sound from a TIG welded 304 stainless straight-through muffler
- Real performance gains of up to 16 hp and 16 lb-ft at the rear wheels
- Brushed 304 stainless steel construction with 4.50-inch PVD black chrome tips for a custom look
- Bolts to factory hanger locations for an easy at-home install with included hardware and instructions
- Fits 2- and 4-wheel drive RAM trucks in all cab configurations, and is CARB compliant
-
- Dyno-proven max gains of 21 hp and 26 lb.-ft. at the rear wheels from a true bolt-on catback exhaust
- Premium brushed 304 stainless steel with TIG-welded seams for lasting durability and a clean silver finish
- Deep, moderately aggressive tone from the straight-through Signature Series muffler
- Dual 2.50-inch mandrel-bent tailpipes clear the spare tire and tow hitch, exiting through the factory bumper bezels
- CARB (California) compliant and designed for 2019*–2026 Silverado/Sierra 1500 5.3L (2WD and 4WD)
- Uses factory hanger locations and includes hardware and instructions for easy at-home installation
-
- Complete cat-back exhaust system engineered for 1988–1993 Chevy/GMC 1500/2500 LD trucks with the 5.7L (350) engine
- Durable 409 stainless steel, mandrel-bent tubing improves exhaust gas flow
- Outlaw Series muffler produces an aggressive sound with maximum performance
- Dual 4.5-inch black ceramic-coated tips can exit dual out the rear or dual out the side
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete Flow FX cat-back exhaust system with included Flow FX muffler for improved sound and maximum performance
- 409 stainless steel, mandrel-bent tubing promotes better exhaust gas flow and long-term durability
- Aggressive / moderate tone with dual tail pipes exiting passenger side just ahead of the rear wheel
- Installs at home using factory hanger locations, with instructions and all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 1996–1999 Chevrolet/GMC 1500 5.7L single and extended cab in 2WD and 4WD
-
- Adds max dyno gains of 12 hp and 14 lb-ft at the rear wheels with a moderate, refined tone
- Full 409 stainless steel construction and a straight-through Flow FX muffler for lasting durability and flow
- Bolt-on install using all factory hangers — includes instructions and hardware for an at-home job
- Dual 4.0-inch black ceramic coated 304S stainless tips with embossed logo for a custom look and better ground clearance
- Fits 2024-2026 Toyota Tacoma 2.4L in both 2WD and 4WD, CARB compliant
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Application-engineered for 1994-1995 GM 1500/2500 LD trucks with 5.0L and 5.7L engines
- Durable 409 stainless steel, mandrel-bent tubing for improved exhaust gas flow
- Flow FX muffler delivers a moderate/mild tone that’s aggressive yet daily-driver friendly
- Dual 4.5-inch black ceramic-coated tips with embossed logo and dual side exit
- Bolt-on install using factory hangers, with instructions and all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 13 hp and 12 lb-ft of torque at the rear wheels — power you can actually feel
- 409 stainless steel construction for years of trouble-free, corrosion-resistant service
- Super 10-based muffler delivers an aggressive, deep exhaust tone
- True direct-fit design uses all factory hangers and connections for easy at-home installation
- Fits 2/4WD 2025–2026 RAM 1500 models with the 3.0L Standard Output engine
- Backed by Flowmaster’s Lifetime Limited Warranty and includes all necessary hardware
-
- Converts Standard Output RAM 1500s into a true dual exhaust like the factory High Output setup
- Brushed 304 stainless steel with hand TIG welds for durability and high-end looks
- Scavenger X-Pipe with D-Port technology delivers a deep tone and maximum exhaust velocity
- Aggressive yet cab-comfortable sound thanks to chambered rear resonators
- Bolt-on fit using factory hangers, exits stock location with 4.5-inch black chrome tips
- CARB compliant and fits both 2WD and 4WD 3.0L RAM 1500 models
-
- True dual cat-back system tailored to the 2025-2026 RAM 1500 3.0L Standard Output and High Output engines, fitting both 2WD and 4WD
- 409 stainless steel construction with mandrel-bent tailpipes for lasting durability and smooth flow
- Scavenger X-Pipe with D-Port technology delivers maximum exhaust pulse velocity and a deep exhaust tone
- Tuned chambered resonators keep cabin comfort in check while the American Thunder muffler adds aggressive sound
- 4.5-inch black ceramic coated tips exit in the factory bumper cutouts for a clean, integrated look
- Converts Standard Output trucks to true dual for better performance gains and future mod compatibility; CARB compliant
-
- American Thunder cat-back exhaust system purpose-built for 2024–2026 GM 1500 trucks with the 6.2L engine
- Active valve control from the dash — quiet in Normal mode, aggressive in Sport or Off-Road mode
- Delivers max dyno gains of 15 hp and 13 lb-ft at the rear wheels
- Durable 409 stainless steel with quad-exit 4.0-inch black ceramic tips
- Bolt-on install using all factory hanger locations — no cutting required
- Fits 2WD and 4WD Silverado and Sierra models and is CARB compliant
-
- Adds max dyno gains of 7 hp and 5 lb-ft at the rear wheels for better acceleration and towing
- Full 409 stainless steel construction resists corrosion for years of trouble-free performance
- Straight-through Flow FX absorption muffler delivers an aggressive tone with no interior drone
- Direct-fit design uses factory hangers and connections for easy DIY installation
- Includes flat band clamps, hardware, and instructions; backed by Flowmaster’s Lifetime Limited Warranty
- Fits both 2WD and 4WD 2020-2026 GM 2500HD/3500HD trucks with the 6.6L gas engine
-
- Dyno-proven max gains of 12 hp and 11 lb-ft at the rear wheels for stronger acceleration and towing
- Full 409 stainless steel muffler, pipe, and tubing for years of trouble-free, corrosion-resistant service
- Direct-fit design uses all factory hanger locations for an easy at-home installation
- Flow FX straight-through absorption muffler delivers an aggressive yet moderate tone
- Includes flat-band clamps, hardware, and installation instructions — plus Flowmaster’s Lifetime Limited Warranty
- Fits 2017-2026 Ford F250/F350 Super Duty 6.2L, 6.8L & 7.3L gas engines in both 2WD and 4WD
-
- Adds 11 hp and 12 lb-ft over stock, measured at the rear wheels on the dyno
- Full 304 stainless steel construction with mandrel-bent piping for durable, improved exhaust flow
- Signature Series straight-through muffler delivers a moderate, performance tone over the stock muffler
- Bolt-on fit using all factory hanger locations, with instructions and hardware included for easy home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Included embossed-logo tip and side-exit design add a custom, finished look
-
- Full 304 stainless steel construction with mandrel-bent 3.00-inch tubing for high flow and long-term durability
- Signature Series straight-through muffler delivers a deep, throaty aggressive-to-moderate exhaust note inside and out
- Large 4.50-inch black PVD stainless-steel tips for a more aggressive look than the factory tips
- Bolt-on fit that uses all factory hanger locations and exits the OEM rear bumper cut-outs
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Fits 2021-2026 F-150 2.7L, 3.5L, 5.0L, and PowerBoost 3.5L with factory dual exhaust
-
- Dyno-proven gains of up to 20 hp and 23 lb-ft at the rear wheels
- Aggressive Outlaw-series muffler tone that turns your F-150 into a standout performance exhaust
- Durable mandrel-bent 409 stainless steel from a 3.00-inch inlet to dual 2.50-inch tail pipes for maximum flow
- Dual 4.00-inch black ceramic-coated tips with embossed logo for a clean, custom rear look
- CARB compliant with new hangers and all hardware included for an easy factory-location install
- Fits 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines and backed by Flowmaster’s Lifetime Limited Warranty
-
- Straight-through 2.50-inch stainless steel perforated core delivers a deep, mellow moderate tone
- Reversible internal flow design installs either direction to match your vehicle’s offsets
- Fully MIG-welded bright 409 stainless steel construction built to last
- Compact case with embossed Flow FX logo on both sides for a show-quality look
- Dual outlet location for a balanced performance exhaust setup
- Show-quality performance muffler at an economical price point
-
- Delivers a deep, mellow moderate tone that stands apart from chambered mufflers
- Straight-through 2.50-inch stainless perforated core for strong flow and refined sound
- Reversible internal flow design installs in either direction to match your offsets
- Fully MIG-welded 409 stainless steel construction for durability and show-quality looks
- Compact case with embossed Flow FX logo — performance and value in one package
- Dual outlet location gives you flexibility when building your exhaust system
-
- Delivers max dyno gains of 16 hp and 18 lb-ft at the rear wheels for a real performance upgrade
- Flow FX series muffler produces an aggressive-to-moderate sound level to match your driving style
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and resists corrosion
- Custom 304 Stainless Steel Teardrop tip exits through the bedside for a bold, distinctive look
- Includes new hangers and all hardware, using factory mounting locations for easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, mellow, moderate exhaust tone that’s distinct from traditional chambered mufflers
- Large 3.00-inch straight-through stainless perforated core for a free-flowing performance exhaust
- Reversible internal flow design installs in either direction to match your application and offsets
- Durable, fully MIG-welded 409 stainless steel construction with an embossed Flow FX logo
- Show-quality Flowmaster muffler in a compact case at an economical price point
- Dual outlet configuration ideal for cat back exhaust and custom builds (tips sold separately)
-
- Dyno-proven max gains of 21 hp and 25 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and durability
- Outlaw series oval muffler delivers an aggressive, performance-tuned sound
- Complete kit with muffler, exhaust tip, and new hangers included for easy install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2021-2026 Ford F-150 RCSB with 2.7, 3.5, and 5.0-liter engines using factory mounts
-
- Delivers a deep, mellow, moderate exhaust tone that stands apart from chambered mufflers
- Large 4.0-inch straight-through stainless perforated core for strong flow on large-displacement gas engines
- Fully MIG-welded, bright 409 stainless steel construction for show-quality looks and durability
- Reversible internal flow design installs in either direction to fit your vehicle
- Universal 4.0-inch inlet and outlet with a compact 24-inch case for flexible fitment
- Economical Flow FX series muffler with embossed logo on both sides
-
- Sold as a pair — everything you need to secure both key connection points in your 4″ exhaust
- Stainless steel construction stands up to heat, vibration, and the elements
- Even clamping pressure creates a strong, leak-resistant joint without permanent welding
- Low-profile design delivers a clean, professional-looking installation
- Bolt-together design lets you remove or adjust the exhaust whenever needed
Showing 817–840 of 842 results
