Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
SCORCHER BLUE Bluetooth Capable Power Module Toyota GR Supra (A90) 20-23 L6-3.0L (t)
$581.00 $726.25 -
Mishimoto Performance Cold Air Intake for 2023+ Nissan Z (MMAI-Z-23X)
$571.95
-
Dinan DINANTRONICS X - 2019-2020 BMW M4CS
$699.95 $787.95 -
Ford Exhaust System Kit
$1,731.92
-
aFe Power AFE-31-10302-p Magnum FLOW OE Replacement Air Filter Jeep Cherokee (KL) 19-22 L4-2.0L (t)
Price range: $71.00 through $76.00
Image
Product
Price
-
- Bolt-on axle-back kit clamps to OE tubing for an easy at-home install with all hardware and instructions included
- 60 Series Delta Flow mufflers deliver a moderate deep exterior tone with a mild interior sound
- Fully mandrel-bent 2.50-inch stainless steel tubing for lasting durability and flow
- Highly polished 4.00-inch quad tips in a dual tailpipe layout for aggressive C6 styling
- CARB (California) compliant and backed by Flowmaster’s Limited Lifetime Warranty
- Engineered specifically for 2005-2008 C6 Corvettes (except ZR1) with 6.0L or 6.2L engines
-
- Deep, mild exterior tone with minimal interior drone thanks to the Super 50 Series muffler and internal resonance chamber
- Durable 2.50-inch mandrel-bent stainless steel construction for smooth, consistent exhaust flow
- Bolt-on installation using factory hanger locations, with stock-location exit and all hardware and instructions included
- Finished with a 3.00-inch brushed 304 stainless steel tip at the rear bumper for a clean look
- Emissions legal, CARB compliant, and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fitment for 2007-2018 Jeep Wrangler JK 2-door and 4-door with the 3.8L or 3.6L engine
-
- Mandrel-bent stainless steel construction maximizes exhaust flow for improved throttle response, power, and mileage
- 80 Series Crossflow muffler delivers a deep, moderate tone outside with little to no interior resonance in the cab
- Quad 3.00-inch polished 304 stainless steel tips give the rear a finished, aggressive look
- Bolts up with factory-style connections and factory hangers, plus all hardware and instructions for a quick install
- CARB (California) compliant and configured for 2WD applications
- Complete axle-back kit that replaces the factory mufflers behind the rear axle
-
- All stainless steel 3.00-inch mandrel-bent tubing and a Super 50 Series muffler improve throttle response, power, and mileage
- Mild interior and exterior tone makes it ideal for towing and daily driving without excessive noise
- Bolt-on fit uses factory hanger locations and includes all parts and hardware for easy installation
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom appearance
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderate/mild exhaust note with Super 50 series mufflers and tuned resonators for great sound without cabin drone
- Mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Scavenger X-pipe helps increase torque and control interior sound
- Dual 4.00-inch polished stainless steel tips with embossed logo for a custom look
- Easy bolt-on install using factory hanger locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderate exterior tone with only a mild sound increase inside the cab – perfect for drivers who want more sound without the drone
- All stainless steel construction with a Super 50 Series muffler and dual 2.50-inch mandrel-bent tailpipes for lasting durability and smooth flow
- Side-exit design behind the rear tires keeps the exhaust clear for towing
- Finished with a pair of 3.00-inch polished 304 stainless steel tips for a clean, premium look
- Fits 2009-2014 Chevrolet Tahoe / GMC Yukon 5.3L in both 2WD and 4WD, and is CARB compliant
- Includes all necessary parts and hardware for easy at-home installation, backed by a Lifetime Limited Warranty
-
- 50 Series HD muffler with large 4.00-inch internals delivers a deep, powerful, moderate sound
- Dual mandrel-bent 2.50-inch 409 stainless steel tailpipes maximize exhaust flow and durability
- Choose straight-out-the-back for a muscular look or side exits ideal for towing
- CARB-compliant and emissions-legal, so you gain performance while staying street legal
- Complete bolt-on kit includes all hardware for an easy at-home installation
- Finished with 3.50-inch polished 304 stainless tips and backed by a Lifetime Limited Warranty
-
- Improves power, mileage, and throttle response on the 5.7L Hemi
- Scavenger Series X-pipe and dual Super 44 mufflers deliver a deep, powerful muscle-car tone
- Moderate exterior sound with a mild interior tone for comfortable daily driving
- Twin brushed 304S stainless tips exit cleanly within the factory rear fascia bezels
- Durable 2.50-inch mandrel-bent stainless steel construction throughout
- CARB compliant and engineered to fit 2011-2014 Charger R/T and Chrysler 300, including AWD
-
- Muscular exterior sound from the Flowmaster 50 Series Big Block muffler, with a built-in Helmholtz chamber to tame interior resonance
- Large 3.50-inch mandrel-bent stainless steel tubing improves flow for noticeable performance gains
- Bolt-on installation using factory hanger locations makes fitment quick and hassle-free
- Polished 4.00-inch 304 stainless steel tip embossed with the Flowmaster logo for a clean finished look
- CARB compliant and emissions-legal, purpose-built for 2011-2018 Silverado/Sierra 1500 6.2L trucks
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Genuine Flowmaster cat-back designed to improve throttle response, power, and mileage
- 2.25-inch mandrel-bent stainless steel with an inline tuned resonator and included 50 Series Delta Flow muffler
- Single Out Rear design plus a 3.50-inch polished stainless tip for a subtle custom look
- Mild interior tone with a deep, moderate exterior sound — aggressive without being intrusive
- Bolts up to factory hanger locations and includes all parts and hardware for an easy install
- CARB (California) compliant, so it’s street-legal where it counts
-
- Transforms your Cruze into a true dual exhaust look and sound with dual 2.25-inch tailpipes and polished 3.00-inch stainless tips
- 50 Series Delta Flow muffler delivers a moderate/mild tone with improved throttle response, power and mileage
- Durable 2.25-inch mandrel-bent 409 stainless steel construction with 304 stainless polished tips
- CARB (California) compliant with Emission Code 5 for emissions-legal peace of mind
- Includes all necessary parts, hardware and a template to match the factory exhaust cutout
-
- Complete crossmember-back kit tuned for a moderate exterior and mild interior exhaust tone
- 50 Series Delta Flow mufflers and a Scavenger X-pipe work together to improve flow and scavenging
- Mandrel-bent 409S stainless pipes reduce restrictions and maximize performance
- Polished 304S stainless 3.00 x 5.50 tips exit through the factory cutout bezels for an integrated look
- Bolt-on fit with all necessary parts and hardware included, plus Flowmaster’s Lifetime Limited Warranty
- CARB (California) compliant for the 1970-1973 Corvette 5.7L V8
-
- Moderate exterior tone from the Super 50 Series muffler with minimal in-cab sound increase
- All stainless steel construction with dual 2.50-inch mandrel-bent tailpipes and a 3.00-inch inlet
- Configurable rear-exit or side-exit routing to suit daily driving or towing
- Finished with large 3.50-inch polished stainless steel tips for a bold rear look
- CARB (California) compliant and includes all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete bolt-on cat-back kit with all necessary parts and hardware for an easy at-home install
- Super 50 Series muffler delivers a moderate/mild tone with Flowmaster performance
- Mandrel-bent stainless steel inlet and 3.00-inch tailpipe finished with a large 4.00-inch polished tip
- CARB (California) compliant and emissions-legal for street use
- Fits 2014-2019 Silverado/Sierra 1500 Classic body 4.3L/5.3L Double Cab and Crew Cab models
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, muscular tone with mild-to-moderate volume that stays comfortable inside the cabin
- Full mandrel-bent 2.50-inch stainless steel tubing with Scavenger Series X-pipe and dual 60 Series mufflers for real performance gains
- Large 4.00-inch polished 304S stainless steel logo tips exit in factory locations for a clean OE-style look
- CARB compliant and emissions-legal on the 5.7L Hemi, fitting both 2WD and 4WD Durango models
- Bolt-on install with all necessary parts and hardware included, backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete crossmember-back kit for 1968-1969 Chevrolet Corvette (2WD) with everything needed for a trouble-free install
- Dual 2.50-inch mandrel-bent stainless tubing and Scavenger X-pipe deliver maximum power and a deep, unique tone
- 50 Series Delta Flow mufflers provide a moderate exterior and mild interior sound level
- Highly polished 304 stainless steel tips exit cleanly through the factory cutout bezels
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
- Ideal for Big Block applications and high-performance small block engines
-
- Delivers a mild-to-moderate exhaust note from the Super 50 Series muffler—performance without the drone
- All stainless steel mandrel-bent tubing and a 3.00-inch tailpipe for maximum flow and lasting durability
- CARB compliant and emissions-legal, so it’s street-legal even in states with strict standards
- Complete bolt-on kit with flanged connections plus all parts and hardware for an easy install
- Polished 5.5″ x 3.5″ oval stainless tip with embossed Flowmaster logo for a clean finished look
- Backed by a Lifetime Limited Warranty for long-term peace of mind
-
- Moderate exterior tone with a mild interior sound—performance without cabin drone
- Stainless steel 80 Series Crossflow muffler and dual 2.50-inch mandrel-bent tailpipes included
- Polished stainless 3.50-inch tips with embossed logo for a clean, upgraded look
- Bolt-on installation using factory hanger locations—easy to do at home with included hardware and instructions
- CARB compliant and emissions-legal, purpose-built for 2012-2018 Jeep Wrangler JK/JKU 3.6L
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Mild exterior sound with a moderate interior tone — deeper character without cabin drone
- Durable 409S stainless steel with 3.00-inch mandrel-bent tubing for smooth, high-flow performance
- Included 70 Series performance muffler and a large 4.00-inch double-walled polished stainless tip with embossed logo
- Easy bolt-on install with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2015-2020 Ford F150 2.7L, 3.3L, 3.5L Ecoboost, 3.5L TiVCT and 5.0L engines across most cab/bed configurations
-
- Delivers a deep, powerful tone at a moderate/mild sound level thanks to the 50 Series HD performance muffler
- Dual mandrel-bent 3.00-inch stainless steel tailpipes with 4.00-inch polished stainless tips for max flow and a finished look
- CARB compliant and emissions-legal — keeps your 6.2L Super Duty street-legal while adding performance
- Your choice of rear under-bumper or side exit behind the rear wheels, ideal for towing
- Complete bolt-on kit with all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel cat-back with a 50 Series HD muffler and dual 3.00-inch mandrel-bent tailpipes for smooth flow and lasting durability
- Deep performance tone outside the vehicle with minimal interior drone while cruising — Flowmaster’s quietest series
- Two tailpipe exits in one kit: under-bumper for an aggressive look or side-exit to keep exhaust off your boat or trailer when towing
- Bolt-on install using factory hanger locations, with instructions and all necessary hardware included for easy at-home fitment
- CARB (California) compliant and emissions-legal, finished with large 4.00-inch polished logo-embossed stainless tips
- Fits both 2- and 4-wheel drive applications and all wheelbases
-
- Direct bolt-on for 2012–2018 Jeep Wrangler JK 3.6L using factory hangers, with all installation hardware included
- Moderate exterior sound with a mild interior tone for an aggressive yet comfortable driving experience
- 80 Series crossflow muffler and mandrel-bent stainless steel tubing for smooth, performance-oriented flow
- Dual 2.50-inch tailpipes finished with large 4.00-inch black ceramic coated stainless tips for a stealthy, muscular look
- Emissions-legal and CARB (California) compliant for a street-legal upgrade
-
- Dyno-proven gains of 6 hp and 7 lb-ft at the rear wheels over stock on the 5.3L Tahoe/Yukon
- Super 40 Series muffler delivers a moderate-to-mild tone, with a tuned resonator to control interior drone
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and longevity
- Larger 3.50-inch polished stainless tip with embossed logo for a clean, custom look
- Bolts to factory hanger locations with all hardware included for an easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 49–71 of 71 results
