Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Volant Maxflow Oiled Air Filter (5122) Replacement Air Filter-5122
$77.90
-
Chevrolet, Dodge, Ford, Jeep... Exhaust Muffler
$130.30
-
2015 Jeep Wrangler (3.6) Computer Chip Programmer
$1,871.05
-
Injen PF Cold Air Intake System - PF5070 INJ-PF5070
$366.27
-
23-26 Toyota GR Corolla (1.6) Exhaust System Kit
$207.83
Image
Product
Price
-
- Deep, mellow, mild-to-moderate tone from the 70 Series Big Block II muffler (P/N 53073) — refined inside and outside the cab
- 3.00-inch mandrel-bent aluminized steel inlet and tailpipe for smooth, unrestricted flow
- Bolt-on fit that uses factory hanger locations for a quick, at-home installation with included hardware
- CARB (California) compliant and emissions-legal, so it’s street-legal in all 50 states
- Purpose-built for 1994–1997 Ford F-250/F-350 5.8L/7.5L trucks — fits 2WD and 4WD, all wheelbases including Crew Cab
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Complete cat-back kit with a 50 Series Big Block muffler for a mild-to-moderate, non-droning tone
- 3.50-inch mandrel-bent stainless steel tubing plus a large 4.00-inch polished stainless tip
- Tailpipe exits behind the right rear tire, purpose-built for towing applications
- Uses factory hanger locations for a quick, at-home install with included hardware and instructions
- Emissions legal and CARB compliant, backed by a Limited Lifetime Warranty
- Purpose-fit for 2011-2019 Silverado/Sierra 2500HD/3500HD crew cab 6.0L trucks (2WD & 4WD, 6.5ft bed)
-
- Steps up to 3-inch mandrel-bent aluminized steel tubing for improved flow over the factory exhaust
- Includes the Super 50 Series muffler (PN 53056) for a mild interior and moderate exterior tone — power without the drone
- True bolt-on design uses factory hanger locations and includes all parts and hardware for easy at-home installation
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom look
- Ideal for daily drivers and light towing such as boats and RVs; CARB compliant and backed by a 3-year Limited Warranty
-
- Delivers improved throttle response, power, and mileage with a moderate, non-intrusive tone
- Built from large 3.00-inch aluminized steel tubing and includes a 70 Series Big Block II muffler (PN 53073)
- Especially recommended for towing applications thanks to its efficiency-focused, mild-to-moderate sound
- Angle-cut tailpipe lets you finish the look with your own choice of exhaust tip (sold separately)
- CARB (California) compliant and fits both 2WD and 4WD models on 133, 155, or 168.4-inch wheelbases
- Easy fit with all necessary parts, hardware, and U-Bolt clamping included
-
- Delivers improved throttle response, power, and mileage in a true Flowmaster cat-back upgrade
- 60 Series Delta Flow muffler tuned for a moderate exterior note and mild interior tone
- Durable aluminized steel build finished with a 2.50-inch brushed stainless steel tip for a subtle custom look
- Includes the muffler, 2.25-inch mandrel-bent tailpipe, U-bolt hardware, and all necessary parts for easy installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Purpose-built fitment for 4WD applications with a clean single tailpipe design
-
- Complete cat-back dual exhaust kit with a milder, deep tone from Super 40 Series mufflers
- 2.50-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage
- Dual tailpipes finished with polished stainless steel tips for a true dual-exhaust look
- Moderate exterior and mild-to-moderate interior tone for comfortable daily driving
- Includes all necessary parts and U-Bolt hardware for an easy at-home installation
- CARB (California) compliant and fits both coupes and convertibles
-
- Deep, aggressive exterior sound with a mild, moderate interior tone from the Super 50™ Series muffler
- Durable 16-gauge mandrel-bent aluminized steel construction with dual 2.50-inch tailpipes and large 3.00-inch polished stainless steel tips
- DOR/DOS flexibility — exit behind the rear wheels for towing or straight out the back for a muscular look
- True bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and emissions-legal, backed by a 3-Year Limited Warranty
- Fits 2004-2008 Ford F-150 and Lincoln Mark LT with 4.6L or 5.4L engines, 2WD or 4WD, all wheelbases
-
- Improves throttle response, power and mileage with 3.00-inch mandrel-bent aluminized tubing
- Mild interior and moderate exterior tone from the included Super 50 Series muffler — refined, not loud
- Single-out-side tailpipe exits behind the right rear wheel, making it especially suited for towing
- CARB (California) compliant and ships with all necessary parts and hardware for an easy fit
- Subtle silver aluminized finish delivers a clean custom look under standard cab/short bed trucks
-
- Moderate exterior tone with a mild interior tone — great power without loud cabin drone
- 3.00-inch mandrel-bent 409 stainless steel tubing paired with an included 50 Series Big Block muffler
- Single side-exit tailpipe routes behind the right rear wheel, keeping exhaust off your boat or trailer while towing
- Delivers improved throttle response, power and mileage
- CARB (California) compliant and includes all parts, hardware and easy-to-follow instructions
-
- Steps up to 3.00-inch mandrel-bent aluminized steel tubing and the improved Super 50 Series muffler for better flow over stock
- Delivers a mild, refined tone — moderate outside, mild to moderate inside — ideal for drivers who want efficiency without a lot of noise
- Purpose-built for daily drivers and light towing such as boats and RVs
- Bolt-on design uses factory hanger locations and includes all parts and hardware for easy at-home installation
- Finished with a 3.50-inch polished stainless steel tip and backed by a 3-Year Limited Warranty on aluminized steel
- CARB (California) compliant and available in a Lifetime-warranty stainless steel version (part# 817403)
-
- Deep, moderate exterior exhaust note with tuned rear resonators to eliminate interior drone
- All mandrel-bent 2.50-inch aluminized steel tubing with an exclusive Scavenger Series X-pipe and dual Super 40 Series mufflers for strong flow and sound
- Dual 4.00-inch polished stainless steel tips exit the factory OE valance cutouts for a clean, integrated look
- CARB (California) compliant, fits 2005-2010 Magnum RT, Charger RT and 300C 5.7L Hemi — including all-wheel drive models
- Complete kit with all hardware and easy-to-follow instructions, backed by a 3-year Limited Warranty
-
- Mandrel-bent 2.50-inch aluminized steel and a Super 50™ Series muffler deliver improved throttle response, power, and mileage
- Moderate exterior tone with a mild-to-moderate interior tone — aggressive outside without cabin drone
- Choose straight-out-the-back for a muscular look or behind-the-rear-wheels exit for towing
- Dual 2.50-inch tailpipes finished with polished 3.00-inch stainless steel tips
- Uses factory hanger locations and includes all hardware for an easy bolt-on installation
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- 16-gauge mandrel-bent aluminized steel construction built for durable, smooth exhaust flow
- Pair of 60 Series Delta Flow mufflers deliver a moderate, performance-matched tone inside and out
- Large 4.00-inch polished stainless steel tips fill the rear valance for a muscular look
- Improved throttle response, power, and mileage from proven Flowmaster flow technology
- Includes all parts and hardware for an easy fit on both coupes and convertibles
- CARB (California) compliant for street-legal performance
-
- Delivers improved throttle response, power, and mileage with a proven Flowmaster cat-back design
- Mild interior tone and moderate exterior sound — added performance without the drone
- 70 Series Big Block II muffler and 3.00-inch mandrel-bent aluminized tubing for a deep, mellow note
- Single side-exit with turn-down tip keeps exhaust off your boat or trailer while towing
- Bolt-on install using factory hangers, U-Bolt clamps, and all included hardware
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Delivers a moderate exterior sound with a mild interior tone — ideal for towing without cabin drone
- Improves throttle response, power, and mileage with the proven Flowmaster Force II design
- Fits 2005-2007 Ford F-250/F-350 trucks with V8 or V10, in 2WD or 4WD and all wheelbases
- Aluminized steel mandrel-bent construction with a 70 Series Big Block II muffler and 3.50-inch polished stainless tip
- CARB compliant and emissions legal, with all hardware included for easy at-home installation
- Backed by a 3-year Limited Warranty
-
- Upgrades to 3-inch mandrel-bent stainless steel tubing for improved flow over the factory exhaust
- Super 50 Series muffler delivers a mild interior and moderate exterior tone — refined, not loud
- Bolt-on install using factory hanger locations, with all necessary parts and hardware included
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom look
- Ideal for daily drivers and light towing of boats or RVs
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty on stainless steel
-
- Deep, moderate exterior sound with a mild interior tone thanks to the Super 50 Series muffler
- 3.00-inch mandrel-bent stainless steel construction for smooth flow and lasting durability
- Configurable dual tailpipes — rear-exit for a muscular look or side-exit ideal for towing a boat or RV
- CARB compliant and emissions-legal in all 50 states
- Bolt-on install using factory hanger locations, with all parts and hardware included
- Backed by Flowmaster’s Lifetime Limited Warranty and finished with polished 3.00-inch dual-wall tips
-
- Super 50 3-chamber muffler with a resonance chamber delivers a moderate/mild tone that’s ideal for towing and long-haul driving while minimizing cabin drone
- Mandrel-bent 409 stainless steel tubing steps 3.0-inch inlet to dual 2.5-inch outlets for maximum exhaust flow and lasting corrosion resistance
- Larger 4.0-inch polished stainless steel tips with embossed logo add a clean, custom look at the bumper
- Uses factory hanger locations and includes all necessary hardware for a straightforward bolt-on installation
- CARB (California) compliant and fits 2015–2020 Ford F-150 2.7L, 3.3L, 3.5L, and 5.0L engines
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Custom-designed cat-back system for 2005-2010 Dodge Dakota V6 and V8 trucks
- Moderate sound level inside and out from the Super 50 Series muffler — deeper than stock, easy to live with daily
- Mandrel-bent aluminized steel construction with a 3.00-inch tailpipe and polished 3.50-inch stainless tip
- True bolt-on install with all parts, hardware and instructions included for at-home fitment
- CARB compliant and emissions-legal, fitting 2WD and 4WD models across all wheelbases
- Backed by a 3-year Limited Warranty
-
- Mild, mellow sound level from the included 70 Series Big Block II muffler keeps the cabin comfortable while improving flow
- Mandrel-bent 3.00-inch aluminized steel tubing helps deliver improved throttle response, power, and mileage
- Large 3.50-inch polished stainless steel tip gives a subtle custom appearance
- Fits both 2 and 4 wheel drive models and all wheelbases for wide compatibility
- CARB (California) compliant and includes all parts and hardware for an easy, factory-fit installation
- Backed by a 3-year Limited Warranty
-
- Moderate-to-mild Super 50 muffler tuning with a resonance chamber to cut interior drone — great for towing and long hauls
- Mandrel-bent 3.00-inch to dual 2.50-inch 409 stainless steel construction for maximum flow and lasting durability
- Larger 4.00-inch polished stainless tips with embossed logo for a custom dual-outlet look
- Bolt-on install using factory hanger locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Delivers a mild-to-moderate interior tone with a moderate exterior sound via the proven Super 50 Series muffler
- Choose dual rear under-bumper exit for a muscular look or dual side exit that’s ideal for towing
- Stainless steel mandrel-bent 3.00-inch inlet and dual 2.50-inch tailpipes for maximum flow and performance
- Finished with large 3.50-inch polished stainless steel tips that clear the factory spare tire
- CARB compliant and fits 2009-2014 F-150 in 2WD or 4WD across all wheelbases
- Complete bolt-on kit with all hardware, backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds real power with max dyno gains of 11 hp and 15 lb-ft at the rear wheels
- Super 50 series muffler and tuned resonators deliver a moderate/mild tone without cabin drone
- Mandrel-bent 409 stainless steel tubing maximizes flow and resists corrosion
- Bolt-on install using factory hanger locations with all necessary hardware included
- Large 4.00-inch polished stainless tip with embossed logo for a custom finish
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete crossmember-back kit built specifically for the 74-79 Corvette 350 with all parts and hardware included
- Stainless steel dual system with mandrel-bent 2.25-inch tubing for smooth, consistent flow
- Dual 60 Series Delta Flow mufflers plus Scavenger Series X-pipe for maximum power and a deep tone
- Moderate exterior and mild interior sound level for aggressive style without excess cabin drone
- Polished 3.00-inch stainless angle-cut tips with embossed logo for a finished, aggressive look
- Backed by Flowmaster’s Lifetime Limited Warranty and CARB compliant by design
Showing 1–24 of 71 results
