Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
aFe Power AFE-21-91072-p Momentum Intake Replacement Air Filter 5 IN F x 8 IN B x 7 IN T (Inverted) x 9 IN H
Price range: $97.00 through $104.00
-
AEM-22-489 Short Ram Intake System
$419.99
-
Magnum FORCE AFE-51-11902-1P-p Stage-2 Cold Air Intake System Ford F-150 Raptor 10-14 V8-6.2L
Price range: $387.00 through $426.94
-
AIRAID Performance Air Intake System- 200-196
$18.95 $19.95 -
Flowmaster Force II Cat-Back Exhaust System
$1,578.41
Image
Product
Price
-
- Three chamber Delta Flow® design with an internal tuning chamber cuts interior resonance for a comfortable, moderate cabin sound
- Delivers the same performance and exterior tone as a two chamber muffler, but with less drone
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fitment with a 3.00″ inlet and 9.75″ body width — ideal for classic muscle car builds
- Trusted 50 Series Delta Flow performance from Flowmaster for your custom exhaust system
-
- Delta Flow® technology delivers a mellow tone plus improved power and throttle response on 4 and 6 cylinder engines
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fit with a 2.25″ inlet makes it adaptable to a wide range of builds
- Moderate sound level tunes deeper when paired with a larger diameter tailpipe or tip
- High-temperature paint finish stands up to real-world exhaust heat
-
- Single-chamber design with Flowmaster Delta Flow technology for maximum race performance
- Aggressive sound level that still cuts noise noticeably compared to open headers
- 3.50-inch inlet diameter built for high-flow race applications
- Universal fitment makes it a versatile choice for custom race exhaust builds
- Durable high-temperature paint finish stands up to demanding exhaust heat
- Uses new hangers (not included) and exhaust tips sold separately for a fully custom setup
-
- Delta Flow® technology delivers strong performance flow with low interior resonance and no annoying drone
- Aggressive, deep sound of the Original 40 Series in a larger Super 40 case profile
- Built from 16-gauge aluminized steel and fully MIG welded for maximum durability
- High-temperature paint finish holds up to real exhaust heat
- Universal fitment with a 2.50″ inlet and offset same-side outlet for flexible Street/Strip builds
-
- True dual crossmember-back design with a built-in H-pipe crossover for balanced flow
- 16-gauge mandrel-bent stainless steel construction built for durability and smooth flow
- Super 44 Series mufflers deliver a moderate-to-aggressive interior and exterior tone
- Includes all hangers and hardware needed for an easy-fit installation
- CARB compliant and designed for 2WD applications
- Improves throttle response, power, and mileage like all Flowmaster systems
-
- Flowmaster Super 40 Series with Delta Flow® technology delivers aggressive, deep and powerful sound
- Larger case profile balances performance flow with reduced low interior resonance
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish adds extra protection under the vehicle
- Universal fitment with dual 2.50 inlets and dual outlets for flexible exhaust builds
- Ideal aggressive-tone upgrade for late model muscle car exhaust systems
-
- Flowmaster Delta Flow technology delivers maximum performance for race applications
- Single chamber race design with a large 4.00-inch inlet for high-flow builds
- Aggressive sound with a noticeable dB reduction over open headers
- Durable high-temperature paint finish stands up to exhaust heat
- Universal fitment lets you integrate it into a custom or cat back exhaust system
-
- Aggressive, high-volume tone built for racing applications with no set decibel limit
- Large 4.00-inch inlet diameter promotes maximum exhaust flow for performance builds
- Universal fitment connects directly to header collectors or into an existing exhaust system
- High-temperature paint finish holds up to the heat of demanding exhaust duty
- Part of Flowmaster’s Outlaw Series — a great match for classic muscle car builds
- Pair with the exhaust tips of your choice (sold separately) to customize your look
-
- Aggressive, race-inspired sound level with no set decibel limit — built to be heard
- 3.00-inch inlet diameter promotes strong exhaust flow for performance builds
- Universal fitment connects directly to header collectors or into an existing exhaust system
- High-temperature paint finish stands up to demanding exhaust heat
- Versatile choice for late model muscle cars and dedicated racing applications
-
- Complete cat-back dual exhaust with everything you need — all parts and hardware included for easy home installation
- Scavenger Series X-pipe and dual 2.50-inch mandrel-bent tubing deliver maximum scavenging and a deep, unique tone
- Super 40 Series mufflers offer more internal volume to handle the flow demands of the Hemi engine
- Bolts up using factory hanger locations and exits into the factory rectangular exhaust tips for a clean, integrated look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back exhaust system built specifically for the 22-26 Toyota Tundra 3.4L
- 409 stainless steel with 3.0-inch mandrel-bent pipes for improved flow and durability
- Straight-through Flow FX muffler delivers an aggressive-to-moderate sound inside and out
- Under-truck dump-style turn-down tip adds style and better off-road ground clearance
- Bolts on using factory hangers with all hardware and instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains up to 5 hp and 5 lb-ft of torque at the rear wheels over stock
- 409 stainless steel with 2.50 and 3.00-inch mandrel-bent tubing for maximum flow and durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Deep, powerful Flow FX muffler tone with an aggressive-to-moderate sound level
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Race-inspired American Thunder Extreme design delivers a super aggressive interior and exterior tone via Super 44 Series mufflers
- Mandrel-bent piping maximizes flow for improved throttle response and power over the restrictive factory exhaust
- Turn-down dual tailpipes add clearance for wide tires and modified suspensions while boosting sound level
- Complete cat-back kit includes all necessary parts and hardware for an easy, bolt-on installation
- CARB (California) compliant with a 2.50″ inlet, built for 2WD coupes and convertibles
-
- Straight-through 3.0-inch stainless steel perforated core delivers smooth flow and a deep, mellow tone
- Fully MIG-welded “bright” 409 stainless steel with embossed Flow FX logos for show-quality durability
- Universal 3.00-inch inlet and outlet fits Chevrolet, Dodge, Ford, GMC and many custom exhaust systems
- Reversible internal flow design installs in either direction to suit your vehicle
- Compact 6-inch diameter body and 20.00-inch length ideal for large displacement gas engines
- Moderate performance tone that stands apart from traditional chambered mufflers
-
- Full 409 stainless steel construction with 3.0-inch mandrel bent pipes for improved flow and lasting durability
- Race-inspired Outlaw series muffler delivers an aggressive, moderate tone heard inside and out
- Dump-style turn-down tip adds rugged style and better ground clearance for off-road driving
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2022-2026 Toyota Tundra 3.4L
-
- Complete crossmember-back kit with mandrel-bent 2.50-inch stainless steel tubing and all installation hardware included
- Dual Super 44 Series mufflers plus a built-in H-pipe crossover deliver a balanced, aggressive exhaust note
- Four tailpipe exit options — angled down, straight out back, side exit, or dump style — to match your build
- Purpose-built for 1967-1972 Chevy/GMC C10 and C15 1/2-ton 2WD coil-spring trucks, short or long wheelbase
- Ample clearance for substantially lowered trucks, plus CARB compliance and a Lifetime Limited Warranty
-
- Super aggressive interior and exterior tone from Flowmaster’s race-oriented Outlaw Extreme series
- Turn-down tailpipes maximize sound and add clearance for wide tires and modified suspensions
- Mandrel-bent construction improves throttle response and power
- Fits 1986-2004 Mustang GT, LX & Cobra with 4.6L or 5.0L engines
- Uses factory hangers and includes all hardware for an easy installation
- CARB (California) compliant with the Outlaw muffler included
-
- Delivers the classic, aggressive Flowmaster tone inside and out — the Original 40 Series sound
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish built to withstand exhaust heat
- Universal fitment with a 2.25″ inlet — ideal for street rod and custom builds
- Proven chambered performance muffler design from the Original 40 Series
-
- Adds up to 14 hp and 12 lb-ft at the rear wheels for power you can feel
- 409 stainless steel muffler and tubing built for years of corrosion-resistant service
- Flow FX straight-through design delivers an aggressive yet moderate tone
- Direct-fit assembly uses all factory hangers for an easy at-home install
- Includes hangers, clamps, hardware, and instructions, plus a Lifetime Limited Warranty
- Fits 2025-2026 Ram 1500 3.0L Standard Output in both 2WD and 4WD
-
- Aggressive muscle car sound both inside and outside the vehicle from Flowmaster’s chambered cross-flow design
- Same-end inlet and offset outlet route cleanly in front of the axle for a side-exit style system
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with a 2.50-inch inlet for flexible custom and replacement builds
- Delivers a classic layout similar to AAR Cuda exhaust systems
-
- Dyno-proven max gains of 13 hp and 12 lb-ft at the rear wheels for power you can feel
- Built from 409 stainless steel muffler body and piping for long-lasting, corrosion-resistant service
- Aggressive American Thunder sound from the oval Super 40-based, dual-out rear muffler
- Direct-fit design uses factory hangers and connections for an easy at-home install
- Includes flat band clamps and all necessary hardware; fits both 2WD and 4WD models
- 3.00-inch inlet and outlet with dual in/dual out configuration for improved flow
-
- Dyno-proven max gains of 15 hp and 13 lb-ft at the rear wheels on the 6.2L GM 1500
- Dash-controlled active valve with integrated turndown — quiet in Normal, loud in Sport or Off-Road mode
- 304 stainless steel construction with a Signature Series tuned muffler for aggressive yet moderate sound
- Dual 2.5-inch mandrel-bent tailpipes exit the factory bumper cut-outs and retain the OEM exhaust bezel
- Bolts on using all factory hangers and connections for an easy at-home installation
- CARB compliant and fits both 2WD and 4WD 2024–2026 Silverado / Sierra models
-
- Deep, aggressive tone from Flowmaster’s Outlaw series muffler with 3.0-inch mandrel-bent tubing for increased performance
- Durable 409 stainless steel construction stands up to heat, debris, and the elements
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts on using factory hanger locations with all necessary hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Large case and internal tuning chamber deliver maximum sound control with a quiet, mild interior tone
- Built for heavy-duty use — full-size trucks, SUVs, RVs, and tow vehicles
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- Supports mileage and power gains even under heavy loads
- 3.50-inch inlet with universal fitment for flexible exhaust builds
- High-temperature paint finish adds extra protection
Showing 217–240 of 339 results
