Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Injen IS Short Ram Cold Air Intake System - IS1345 INJ-IS1345
$428.67
-
AEM-21-847C Cold Air Intake System
$529.99
-
Edge Products Juice CS2/CTS2 To CTS3 Upgrade Kit - EDG-83601-3
$529.95 $596.95 -
aFe Power AFE-46-32003 Silver Bullet Throttle Body Spacer Kit Dodge Dakota 00-09 / Durango 00-07 V8-4.7L
$139.00 $173.75 -
aFe Power AFE-80-10001 Aries Powersport OE Replacement Air Filter w/ Pro 5R Media Aprilia RSV Mille/Mille R (98-00) 1000cc
$88.00 $110.00
Image
Product
Price
-
- Aggressive, deep exhaust tone powered by the proven Flowmaster Outlaw series muffler
- Max dyno gains of 15 hp and 20 lb-ft at the rear wheels on the 5.3L Silverado/Sierra 1500
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the loudest, most aggressive sound in Flowmaster’s Super series lineup via a single chamber design
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Patented Delta Flow® technology engineered for maximum performance
- 2.50-inch inlet with universal fitment for Plymouth 225 through 440 muscle car builds
- High-temperature paint finish stands up to the heat
- Ideal off-highway upgrade for enthusiasts building an aggressive performance exhaust
-
- Flowmaster 50 Series Delta Flow® three chamber design cuts interior resonance while keeping an aggressive exterior tone
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 2.25″ inlet fitment makes it ideal for custom and replacement exhaust builds
- Moderate sound level tuned for comfortable street driving and strip use
- High-temperature paint finish stands up to heat and the elements
- Adaptable across many platforms — exhaust tips sold separately so you control the final look
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, highest-performing street tone in a four-inch case
- 16-gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50-inch inlet, ideal for late-model muscle car and custom builds
- Compact 9.50-inch body width with a protective high-temperature paint finish
- Rich, powerful, aggressive sound level tuned for the street
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Three chamber Delta Flow® design reduces interior resonance while keeping the same exterior tone as the two chamber version
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet makes it a versatile choice for custom exhaust builds
- Moderate sound level tuned for comfortable street/strip driving without excessive cabin drone
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delta Flow® two-chamber design with Delta deflectors boosts scavenging for better performance and reduced interior sound
- Milder exterior tone and less interior resonance than the standard 40 Series, while keeping an aggressive note
- Rugged 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability
- 3.00″ inlet with dual outlet configuration for strong exhaust flow
- Universal fitment covers Chevrolet, Ford, and GMC 305, 350, 351, and 460 applications
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delivers the iconic aggressive Flowmaster tone inside and out
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with 2.50″ dual inlet and dual outlet for flexible builds
- Ideal aggressive muffler for street rod and custom exhaust systems
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Three chamber Delta Flow® design with an internal tuning chamber reduces interior resonance while keeping an aggressive exterior tone
- 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability and heat resistance
- Moderate sound level makes it ideal for a Street/Strip vehicle you can still drive daily
- 3.00″ inlet diameter supports strong performance exhaust flow
- Direct fitment for Ford and Plymouth 225, 273, 318, 361, 383, 413, 415, 426, and 440 engines
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delivers the deep, powerful sound of the Original 40 Series with reduced interior resonance thanks to Delta Flow® technology
- Larger case profile shines on forced induction and high-horsepower vehicles, balancing performance and sound
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Race-derived Super 40 Series design engineered from Flowmaster’s Top Ten race muffler lineup
- Universal fitment with a 2.50-inch inlet makes it ideal for street rod and custom exhaust builds
-
- Deep, aggressive Outlaw series sound with increased performance over the restrictive factory exhaust
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Direct-fit design uses factory hangers and includes all hardware for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delta Flow® three chamber design with an internal tuning chamber cuts interior resonance while keeping an aggressive exterior tone
- Fully MIG welded 16 gauge 409S stainless steel for long-lasting durability
- Moderate sound level delivers a serious note without wearing you out on the highway
- Universal 2.25″ inlet fitment gives you flexibility for custom exhaust and cat back system builds
- High-temperature paint finish adds protection against heat and the elements
- Trusted Flowmaster 50 Series performance in a versatile muffler for late model muscle cars
-
- Delta Flow® two-chamber design with Delta deflectors for increased scavenging and improved performance
- Aggressive exhaust tone with reduced interior resonance and drone
- Milder exterior tone than the standard 40 Series for a more livable daily setup
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 2.50-inch inlet fitment for flexible custom and replacement builds
- High-temperature paint finish for lasting protection against heat and the elements
-
- Delta Flow® technology delivers deep, powerful sound with low interior resonance
- Larger case profile excels on forced-induction and high-horsepower vehicles
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 3.00″ inlet fitment makes it a versatile building block for any exhaust system
- Race-derived Super 40 Series tuned for aggressive late-model muscle car sound
-
- Flowmaster Super 40® with Delta Flow® technology delivers an aggressive, deep tone with low interior resonance
- Developed from Flowmaster’s Top Ten race muffler lineup for street and strip performance
- Larger case profile shines on forced induction and high horsepower vehicles
- Built tough from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal 3.00″ inlet fitment makes it ideal for late-model muscle car exhaust builds
- High-temperature paint finish helps stand up to heat and the elements
-
- Delivers the loudest, most aggressive sound in the Flowmaster Super series thanks to its single chamber design
- Patented Delta Flow® technology maximizes performance flow
- Built from 16 gauge 409S stainless steel and fully MIG welded for lasting durability
- 3.00″ inlet with universal fitment for flexible late-model muscle car builds
- Purpose-built for off-highway use where maximum attitude matters
-
- Three-chamber 50 Series HD design delivers improved performance, throttle response, and mileage for heavy-duty trucks
- Constructed from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Deeper, moderate tone with minimal resonance — ideal for trucks with modified engines
- 2.50-inch inlet with dual inlet and dual outlet locations plus a high-temperature paint finish
- Universal fitment for flexible integration into custom or replacement exhaust systems
- Purpose-built for Dodge and Ford (5.4, 8.0, 8.3) diesel and gas applications
-
- Delta Flow® technology delivers controlled sound with mileage and power gains
- Enlarged case design produces a mild, refined exhaust note
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- Dual inlet/dual outlet with 2.25″ inlet diameter for flexible builds
- Universal fitment suited to trucks, SUVs, RVs, tow vehicles, and street cars
- High-temperature paint finish stands up to real-world exhaust heat
Showing 265–288 of 339 results
