Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Performance Air Intake System- 450-327
$449.99
-
BMW (3.0) Engine Cold Air Intake
$2,019.68
-
Magnum FORCE AFE-21-91045-MA-p Intake Replacement Air Filter (Pair) 4-1/2 IN F x 7 IN B x 4-1/2 IN T (Inverted) x 7 IN H
Price range: $149.00 through $160.00
-
Mishimoto MMIG-ALT-07 Ignition Coil for Nissan & Infiniti
$41.95
-
aFe Power AFE-30-10149-p Magnum FLOW OE Replacement Air Filter Honda Fit 07-08 L4-1.5L
Price range: $71.00 through $76.00
Image
Product
Price
-
- Delivers the aggressive Outlaw exhaust tone inside and out on 2018-2026 Jeep Wrangler JL 3.6L models
- 2.50-inch mandrel-bent stainless steel tubing promotes free-flowing performance
- Dual 2.5-inch tailpipes with 4.00-inch black ceramic coated stainless steel tips and embossed logo for a modern look
- Tuned front reflection resonator reduces interior drone, with an optional non-resonated pipe for even more aggression
- CARB compliant, emissions-legal, and a bolt-on fit using factory hanger locations with all hardware included
-
- Larger 2.50-inch mandrel-bent stainless tubing replaces the restrictive 2.25-inch factory tailpipes and resonators
- Non-resonated dual exit delivers an aggressive HEMI tone at a moderate, street-friendly volume
- Bold 4.50-inch black ceramic coated 304S stainless tips with an embossed logo
- Bolt-on fit using factory hangers and stock exit location with all hardware and instructions included
- CARB (California) compliant for legal use on the 2019-2024 & 2026 RAM 1500 5.7L HEMI
-
- Aggressive-to-moderate Flowmaster tone from a pair of Super 44 Series mufflers
- Mandrel-bent 2.50-inch stainless steel tubing with a built-in H-pipe crossover for better scavenging
- Purpose-built for 1967-1972 Chevy/GMC K10-K2500 4WD V8 trucks, short or long wheelbase
- Three tailpipe exit options: turndown, side exit, or straight out the back
- CARB compliant (Emission Code 5) and backed by a Lifetime Limited Warranty
- Includes new hangers and all necessary installation hardware
-
- Mandrel-bent 2.50-inch 409 stainless steel tubing maximizes flow and resists corrosion for long-term durability
- Dual Super 44 Series mufflers deliver a deep, aggressive-to-moderate Flowmaster rumble inside and out
- Built-in H-pipe crossover balances exhaust flow and sharpens the exhaust note
- Choose from three tailpipe exits: straight rear, side exit, or dumped behind the rear tires
- Uses factory hangers and includes all hardware for a straightforward at-home installation
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
-
- Deep, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2016-2023 Toyota Tacoma 3.5L
-
- Dyno-proven gains of 6 hp and 7 lb-ft at the rear wheels over stock on the 5.3L Tahoe/Yukon
- Super 40 Series muffler delivers a moderate-to-mild tone, with a tuned resonator to control interior drone
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and longevity
- Larger 3.50-inch polished stainless tip with embossed logo for a clean, custom look
- Bolts to factory hanger locations with all hardware included for an easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive exhaust note powered by the Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle for off-road driving
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2003-2024 Toyota 4Runner 4.0L
-
- Complete cat-back kit with the 50 Series HD muffler included — no need to source a muffler separately
- Aggressive yet moderate sound from Flowmaster’s proven 50 Series HD design
- Dual tail pipes with dual 3.00-inch outlets and an embossed tip logo for a bold, finished look
- Uses factory hangers for a direct, straightforward bolt-on installation
- CARB (California) compliant with Emission Code 5 for street-legal peace of mind
- Durable silver pipes paired with a black muffler finish for a clean underbody appearance
-
- Delivers a deep, aggressive-to-moderate Flowmaster rumble from the proven Super 44 Series mufflers
- Built from durable, mandrel-bent 2.50-inch 409 stainless steel with a built-in H-pipe crossover for maximized flow
- Choose from three tailpipe exits — straight rear, side exit behind the tires, or dumped behind the tires
- Complete kit includes new hangers and all hardware for a straightforward at-home installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits both short and long wheelbase 1967-1972 Ford F-100/F-250/F-350 2WD V8 trucks
-
- Fits 2007-2018 Jeep Wrangler JK, 2-door and 4-door, with 3.6L or 3.8L engine
- Mandrel-bent 2.50-inch 409 stainless tailpipe with a polished 3.00-inch 304 stainless tip for flow and corrosion resistance
- Replaces the factory transverse muffler to reduce weight and improve ground clearance
- Moderate sound level for an aggressive yet livable tone
- Uses factory hangers with all hardware included for about a 15-minute at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive Super 10 Series sound loud inside and out, backed by real Flowmaster performance
- Two selectable tailpipe exits — under-bumper or behind the rear wheels for towing flexibility
- All mandrel-bent 409 stainless 3.00-inch tubing with dual 4.00-inch black ceramic coated tips
- CARB compliant and emissions-legal for street use where required
- Easy bolt-on install using factory hangers with all hardware included
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep exhaust tone powered by the proven Flowmaster Outlaw series muffler
- Max dyno gains of 15 hp and 20 lb-ft at the rear wheels on the 5.3L Silverado/Sierra 1500
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- One of Flowmaster’s most aggressive tones from the Super 10 Series muffler — loud inside and out
- Mandrel-bent 409 stainless steel 3.00-inch tubing and dual tailpipes for lasting performance and flow
- Two included tailpipe exit configurations: straight under the bumper or behind the rear wheels for towing
- Large 4.00-inch black ceramic-coated stainless steel tips with embossed logo
- CARB compliant and emissions-legal, with a bolt-on fit using factory hangers and included hardware
- Fits 2021-2026 Ford F-150 2.7L, 3.5L, and 5.0L in 2WD or 4WD, backed by a Lifetime Limited Warranty
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Aggressive Outlaw-series tone that gives your Bronco a bold, unmistakable voice
- Dyno-proven gains of up to 14 hp and 16 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom rear-end look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive tone under throttle with a mild idle and no drone, thanks to the tuned 60 Series style muffler
- Proven performance with maximum dyno gains of 19 hp and 19 lb-ft at the rear wheels
- Durable, high-flow 3.00-inch mandrel-bent 409 stainless steel construction
- Polished 3.00-inch stainless tip with embossed logo for a custom finished look
- Easy bolt-on install using included hardware, new hangers, and factory mounting locations
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 11 HP and 10 LB.-FT. at the rear wheels with the deep, aggressive Super 40 Series muffler tone
- Mandrel-bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Choose side-exit or rear-exit configurations to customize your F-150’s look
- 3.5-inch polished stainless steel tips with embossed logo for a classic performance finish
- Bolts on using factory hanger locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-verified gains of 6 hp and 7 lb-ft at the rear wheels with an aggressive Outlaw exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability while supporting future engine upgrades
- Over-axle routing gains 2.0 inches of axle clearance for better suspension travel on modified, off-road Broncos
- Dual 4.00-inch black chrome tips with embossed logo add a custom look to the 2021-2026 Ford Bronco 4-door
- Includes new hangers and all necessary hardware, using factory mounting locations for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
Showing 409–432 of 461 results
