Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Performance Air Intake System- 201-187
$349.99
-
Mishimoto MMSK-RDH Weighted Red Shift Knob for Interior Accessories
$49.95
-
23-26 Honda Civic Type R (Hatchback - 2.0 - FWD) Exhaust System Kit
$1,433.48
-
Magnum FORCE AFE-51-12402 Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge/RAM 1500 09-18/RAM 1500 Classic 19-22 V8-5.7L HEMI
$392.70
-
Injen Technology Air Filter - X-1090-B INJ-X-1090-B
$76.64
Image
Product
Price
-
- All stainless steel 409S construction backed by Flowmaster’s Limited Lifetime Warranty
- Exclusive 80 Series Crossflow muffler retains full ground clearance in the factory rear-axle location
- Mandrel-bent dual 2.50-inch pipes with H-pipe crossover for a deep, smooth tone and reduced deceleration back-rap
- Moderate sound level delivers a rich exhaust note without an overwhelming cabin drone
- CARB compliant and includes all parts, hardware, and illustrated instructions for a complete install
- Direct-fit for 1967-1974 Camaro and Firebird and 1968-1974 Nova in 2WD applications
-
- Cross-flow design lets you mount the muffler transversely behind the rear end for tight exhaust layouts
- Delivers an aggressive muscle car sound both inside and outside the vehicle
- 16 gauge aluminized steel construction, fully MIG welded for maximum durability
- High-temperature paint finish helps resist heat and the elements
- 2.50-inch inlet with a dual outlet configuration for late model muscle car applications
-
- Deep, powerful tone from the large-case 80 Series Cross-flow performance muffler with a moderate-to-aggressive exterior sound
- Full 3.00-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage over the restrictive factory exhaust
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- Bolt-on install using factory hanger locations, U-Bolt clamping, and all included hardware
- CARB (California) compliant with Emission Code 5 and configured for 2WD applications
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Direct-fit cat-back system for 1998-2002 Camaro/Firebird with the 3.8L engine
- 80 Series Crossflow muffler delivers a deep, muscular exterior tone with a moderate interior sound
- 2.50-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage
- Dual 2.50-inch tailpipes with large 3.00-inch polished stainless steel tips for a true dual look
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Includes a specially tuned resonator plus all necessary parts and hardware for an easy fit
-
- Cross-flow chambered design built for transverse mounting behind the rear end
- Delivers an aggressive muscle car sound inside and outside the vehicle
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish adds heat and corrosion protection
- 3.00-inch inlet with dual outlet and universal fitment for flexible builds
-
- Cross-flow 80 Series design with an inlet and outlet on each end — purpose-built for transversely mounted muffler applications behind the rear end
- Delivers an aggressive muscle car sound both inside and outside the vehicle
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- High-temperature paint finish helps the muffler withstand demanding exhaust heat
- Excellent transverse-muffler replacement for late-model Camaros and Firebirds
- 2.50-inch inlet diameter with dual inlet and dual outlet locations
-
- American Thunder cat-back system delivers a moderate-to-aggressive exterior tone with a comfortable, mild-to-moderate interior sound
- 3.00-inch mandrel-bent inlet and 80 Series Cross-flow muffler (P/N 43083) improve throttle response, power, and mileage
- Dual 2.50-inch mandrel-bent tailpipes give a muscular look and unmistakable presence
- Bolts on using factory hanger locations with all necessary parts and U-Bolt hardware included
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Genuine Flowmaster American Thunder cat-back exhaust with an included 80 Series Cross-flow muffler for a deep, aggressive tone
- Improves throttle response, power, and mileage thanks to 3.00-inch mandrel-bent aluminized steel tubing and smooth flow
- Dual 2.50-inch mandrel-bent tailpipes deliver a traditional dual-exhaust look and muscular sound
- Bolts to factory hanger locations with included U-Bolt hardware for an easy 2WD installation
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Model-specific Force II axle-back exhaust engineered for 2007-2011 Jeep Wrangler 3.8L V6
- Stainless steel 80 Series crossflow muffler delivers a moderate exterior sound with a mild interior tone
- Dual 2.50 inch mandrel-bent tailpipes finished with 3.50 inch polished stainless steel tips
- Flanged mount and included hardware make for an easy bolt-on installation
- CARB compliant and emissions-legal, backed by Flowmaster’s Lifetime Limited Warranty
-
- Exclusive 80 Series Crossflow muffler delivers a deep, moderate tone inside and out
- Complete dual 2.50-inch mandrel-bent system with built-in H-pipe crossover for balanced flow
- Purpose-fit for 1967-1974 Camaro/Firebird and 1968-1974 Nova classic muscle cars
- Includes all parts, U-bolt hardware, and illustrated instructions for a straightforward install
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
- Aluminized steel construction with the muffler tucked high behind the rear differential for clean clearance
-
- Deep, powerful sound from the 80 Series Cross-flow muffler with a moderate-to-aggressive exterior tone and mild-moderate interior tone
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes finished with polished stainless steel tips for a muscular look
- Improves throttle response, power, and mileage as part of a complete Flowmaster cat-back system
- Bolts to factory hanger locations with U-Bolt clamps and includes all hardware for easy installation
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Deep, powerful tone from the large-case 80 Series Cross-flow muffler with a moderate-to-aggressive exterior sound
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes for smooth flow and improved throttle response, power, and mileage
- Bolts up to factory hanger locations with U-Bolt clamps and all included hardware for an easy, no-cut install
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
-
- Compact 4.0 x 9.5 x 13.0 in. case makes for easier fitment on tight custom exhaust builds
- Offset same-end 2.50 in. inlet and outlet ideal for side-exit routing in front of the rear tires
- Durable 409S Stainless Steel construction with high-temperature paint finish built to last
- Delivers a moderate to aggressive Flowmaster tone perfect for classic muscle car applications
- Backed by Flowmaster’s Lifetime Limited Warranty for lasting peace of mind
-
- Bolt-on axle-back installation using factory hangers with all hardware and instructions included
- Stainless steel 80 Series™ crossflow muffler paired with dual 2.50-inch mandrel-bent tailpipes
- Large 4.00-inch black ceramic-coated 304 stainless tips with embossed Flowmaster logo for a stealthy look
- Moderate exterior tone and mild interior sound for comfortable daily and trail driving
- CARB compliant and emissions-legal, fits 2018-2026 Jeep Wrangler JL 3.6L and 2.0L turbo
- Backed by the Flowmaster Lifetime Limited Warranty
-
- Flowmaster Force II axle-back exhaust engineered to fit 2018-2026 Jeep Wrangler JL with the 3.6L V6 or 2.0L turbo
- Moderate exterior tone and mild interior sound for performance without cabin drone
- Stainless steel 80 Series cross-flow muffler with dual 2.50-inch mandrel-bent tailpipes and 4.00-inch polished tips
- True bolt-on install using factory hangers, with all parts, hardware, and instructions included
- CARB (California) compliant, emissions-legal Dual Out Rear system
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Mandrel-bent stainless steel construction maximizes exhaust flow for improved throttle response, power, and mileage
- 80 Series Crossflow muffler delivers a deep, moderate tone outside with little to no interior resonance in the cab
- Quad 3.00-inch polished 304 stainless steel tips give the rear a finished, aggressive look
- Bolts up with factory-style connections and factory hangers, plus all hardware and instructions for a quick install
- CARB (California) compliant and configured for 2WD applications
- Complete axle-back kit that replaces the factory mufflers behind the rear axle
-
- Direct bolt-on fit for 2018-2026 Jeep Wrangler JL 2-door and 4-door with the 3.6L engine, using factory hangers
- Aggressive exterior tone with a mild interior note thanks to the 80 Series crossflow muffler and dedicated reflection resonator
- Full stainless construction with 2.50-inch mandrel bent inlet and dual tailpipes for smooth, unrestricted flow
- Stealthy dual 4.00-inch black ceramic coated tips with embossed Flowmaster logo
- CARB (California) compliant, emissions-legal system that includes the muffler and all necessary hardware for easy at-home installation
-
- Moderate exterior tone with a mild interior sound—performance without cabin drone
- Stainless steel 80 Series Crossflow muffler and dual 2.50-inch mandrel-bent tailpipes included
- Polished stainless 3.50-inch tips with embossed logo for a clean, upgraded look
- Bolt-on installation using factory hanger locations—easy to do at home with included hardware and instructions
- CARB compliant and emissions-legal, purpose-built for 2012-2018 Jeep Wrangler JK/JKU 3.6L
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive muscle car sound both inside and outside the vehicle from Flowmaster’s chambered cross-flow design
- Same-end inlet and offset outlet route cleanly in front of the axle for a side-exit style system
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with a 2.50-inch inlet for flexible custom and replacement builds
- Delivers a classic layout similar to AAR Cuda exhaust systems
-
- Direct bolt-on for 2012–2018 Jeep Wrangler JK 3.6L using factory hangers, with all installation hardware included
- Moderate exterior sound with a mild interior tone for an aggressive yet comfortable driving experience
- 80 Series crossflow muffler and mandrel-bent stainless steel tubing for smooth, performance-oriented flow
- Dual 2.50-inch tailpipes finished with large 4.00-inch black ceramic coated stainless tips for a stealthy, muscular look
- Emissions-legal and CARB (California) compliant for a street-legal upgrade
-
- Crossflow design purpose-built for transverse muffler mounting behind the rear end
- Delivers an aggressive muscle car sound inside and outside the vehicle
- Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Excellent replacement for Camaros and Firebirds with transverse mufflers
- 2.50-inch inlet with dual transverse outlets and a heat-resistant high-temperature paint finish
