Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Momentum Gt Cold Air Intake System- AFE-51-76217-P
Price range: $410.00 through $435.00
-
Injen SES Intercooler Pipes - SES9015ICP-P INJ-SES9015ICP-P
$387.07
-
Flowmaster Scavenger Series Elite Header
$1,171.06
-
Flowmaster Force II Axle-back Exhaust System
$574.90
-
Mishimoto MMTL-NSF-15 No-Spill Coolant Funnel Kit, 15 Piece
$30.95
Image
Product
Price
-
- Dyno-proven gains of 18 hp and 14 ft/lbs at the rear wheels for real performance you can feel
- Direct-fit design connects to the factory dual tail pipes and reuses all factory hangers for an easy at-home install
- 409 stainless steel construction with 3.00-inch mandrel-bent pipes for durability and optimum flow
- Flow FX Series muffler delivers an aggressive-to-moderate exhaust tone with dual outlets
- Includes clamps, hangers, hardware, and installation instructions, backed by Flowmaster’s 1-Year Limited Warranty
-
- Max dyno gains of 11 hp and 17 lb-ft at the rear wheels from a proven straight-through Flow FX design
- Built from durable 409 stainless steel with black ceramic-coated 304S stainless steel 4.0-inch tips
- CARB (California) compliant, so this performance exhaust is street-legal
- Uses all factory hanger locations for an easy at-home install with included hardware and instructions
- Dual 2.5-inch mandrel-bent tailpipes deliver a moderate, aggressive sound and better ground clearance than stock
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 14 hp and 12 lb-ft at the rear wheels for power you can feel
- 409 stainless steel muffler and tubing built for years of corrosion-resistant service
- Flow FX straight-through design delivers an aggressive yet moderate tone
- Direct-fit assembly uses all factory hangers for an easy at-home install
- Includes hangers, clamps, hardware, and instructions, plus a Lifetime Limited Warranty
- Fits 2025-2026 Ram 1500 3.0L Standard Output in both 2WD and 4WD
-
- 409 stainless steel cat-back construction built for years of trouble-free, corrosion-resistant service
- Converts Standard Output models into a true dual system for better performance gains and future mod compatibility
- Scavenger X-Pipe with D-Port technology delivers a deep, aggressive-to-moderate exhaust tone
- Tuned resonators keep the cabin comfortable while still sounding aggressive
- Bolts on using factory hangers and exits through the stock bumper cutouts for a clean fit
- Finished with dual 4.5-inch black ceramic coated tips and CARB compliant for California
-
- Adds a proven 21 hp and 18 lb-ft at the rear wheels on the Ram 1500 3.0L High Output
- Built entirely from 409 stainless steel for years of corrosion-resistant, trouble-free performance
- Direct-fit design uses all factory hangers and connections — easy at-home installation with included clamps and hardware
- Straight-through Flow FX absorption muffler delivers a moderate, drone-free performance tone
- Fits both 2WD and 4WD 2025–2026 Ram 1500 models and backed by Flowmaster’s Lifetime Limited Warranty
-
- Max dyno gains of 11 hp and 10 lb-ft at the rear wheels for stronger acceleration and towing
- 409 stainless steel construction with a straight-through Flow FX muffler for aggressive sound and no drone
- Fits 2020-2026 GM 2500HD/3500HD 6.6L gas trucks in both 2WD and 4WD
- Uses all factory hangers and connections for a simple, cut-free at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes installation instructions and all necessary hardware
-
- Dyno-proven max gains of 13 hp and 11 lb-ft at the rear wheels for better acceleration and towing
- Built entirely from 409 stainless steel for years of trouble-free, corrosion-resistant service
- Straight-through Flow FX absorption muffler delivers great sound with no drone at a moderate level
- Direct-fit design uses all factory hanger locations and hardware for easy at-home installation
- Fits 2014-2026 RAM 2500/3500 6.4L HEMI trucks in both 2WD and 4WD
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct bolt-on cat-back exhaust for Chevrolet / GMC 5.3L 4WD — installs on factory hangers with no fabrication
- Built from 409 stainless steel with a 16-gauge pipe wall for corrosion resistance and long-term durability
- Flow FX muffler delivers a Moderate/Mild tone — aggressive under throttle, refined at cruise
- Dual exit layout with angled 4.00-inch tips and embossed logo for a sport-focused rear look
- CARB (California) compliant and backed by the Flowmaster Limited Lifetime Warranty
-
- Dyno-proven max gains of 24 hp and 29 lb-ft at the rear wheels for real performance you can feel
- Aggressive-to-moderate sound from the Flow FX series muffler—deep tone without excessive highway drone
- Durable mandrel-bent 409 stainless steel, 3.00-inch to dual 2.50-inch, for maximum flow and long life
- Easy bolt-on install using factory-mounting locations with new hangers and all hardware included
- Dual 4.00-inch tips with embossed logo add an aggressive, finished look at the rear
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Straight-through stainless steel perforated core delivers free-flowing performance with a deep, mellow tone
- Fully mig-welded 409 stainless steel construction with the Flow FX logo embossed on both sides
- Reversible internal flow design installs in either direction to match your offsets and application
- Universal 3.00″ inlet with dual outlet location for versatile fitment on late model muscle cars
- Moderate sound level offers an alternative to the traditional chambered Flowmaster tone
- Quality straight-through performance muffler at an economical price point
-
- Fully welded 409S stainless steel case delivers increased durability against heat and the elements
- Straight-through smooth core produces a moderate, cleaner tone that’s comfortable inside and outside the vehicle
- Compact 4.00 inch round body fits nicely on just about any application
- Universal fitment with a 2.25 inch inlet makes it easy to integrate into a catback or custom exhaust system
- Economically priced Flowmaster Flow FX performance muffler for late model muscle cars
-
- Dyno-proven increases of 18 hp and 16 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel bent 3.50-to-3.00-inch pipes for better flow
- Dual 4.00-inch black stainless steel tips with embossed logo for a bold, custom look
- Direct bolt-on fit using factory hanger locations, with hardware and instructions included
- Aggressive-to-moderate sound tuned for the 6.4L HEMI RAM 2500
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of 11 hp and 12 lb-ft at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel-bent 2.50-in dual inlet / 3.00-in single exit piping
- Flow FX straight-through muffler tuned for a moderate, mild tone with no interior drone
- Side exit behind the rear wheel finished with a 4.50-inch black ceramic embossed tip
- Uses factory hangers and includes all hardware plus instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, throaty exhaust note with aggressive-to-moderate sound levels inside and outside your F-150
- Mandrel-bent 409 stainless steel 3.00-inch tubing with a Flow FX straight-through muffler for maximum flow
- Large 4.50-inch black ceramic-coated stainless-steel tips for an aggressive look over the factory tip
- Bolt-on design uses all factory hanger locations and exits the OEM rear bumper cut outs for an easy fit
- CARB (California) compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Complete kit includes all necessary parts and hardware for installation
-
- Dyno-proven maximum gains of up to 14 hp and 15 lb-ft at the rear wheels on the 2.7L turbo
- Durable 409 stainless steel construction with 3.00-inch mandrel-bent pipes for better flow
- Flow FX straight-through muffler delivers an aggressive-to-moderate performance tone
- Bolts on using factory hanger locations with all hardware and instructions included for easy at-home install
- Rear high-exit design preserves the best possible ground clearance
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds real power with max dyno gains of 12 hp and 14 lb-ft at the rear wheels on the Tacoma 2.4L
- 409 stainless steel construction and a straight-through Flow FX muffler for lasting durability and moderate, aggressive sound
- High-clearance dual 2.5-inch mandrel-bent tailpipes exit driver side for better off-road departure angles
- Bolts to all factory hanger locations and connections for easy at-home installation with included hardware and instructions
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete Flow FX cat-back exhaust system with included Flow FX muffler for improved sound and maximum performance
- 409 stainless steel, mandrel-bent tubing promotes better exhaust gas flow and long-term durability
- Aggressive / moderate tone with dual tail pipes exiting passenger side just ahead of the rear wheel
- Installs at home using factory hanger locations, with instructions and all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 1996–1999 Chevrolet/GMC 1500 5.7L single and extended cab in 2WD and 4WD
-
- Adds max dyno gains of 12 hp and 14 lb-ft at the rear wheels with a moderate, refined tone
- Full 409 stainless steel construction and a straight-through Flow FX muffler for lasting durability and flow
- Bolt-on install using all factory hangers — includes instructions and hardware for an at-home job
- Dual 4.0-inch black ceramic coated 304S stainless tips with embossed logo for a custom look and better ground clearance
- Fits 2024-2026 Toyota Tacoma 2.4L in both 2WD and 4WD, CARB compliant
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Application-engineered for 1994-1995 GM 1500/2500 LD trucks with 5.0L and 5.7L engines
- Durable 409 stainless steel, mandrel-bent tubing for improved exhaust gas flow
- Flow FX muffler delivers a moderate/mild tone that’s aggressive yet daily-driver friendly
- Dual 4.5-inch black ceramic-coated tips with embossed logo and dual side exit
- Bolt-on install using factory hangers, with instructions and all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max dyno gains of 7 hp and 5 lb-ft at the rear wheels for better acceleration and towing
- Full 409 stainless steel construction resists corrosion for years of trouble-free performance
- Straight-through Flow FX absorption muffler delivers an aggressive tone with no interior drone
- Direct-fit design uses factory hangers and connections for easy DIY installation
- Includes flat band clamps, hardware, and instructions; backed by Flowmaster’s Lifetime Limited Warranty
- Fits both 2WD and 4WD 2020-2026 GM 2500HD/3500HD trucks with the 6.6L gas engine
-
- Dyno-proven max gains of 12 hp and 11 lb-ft at the rear wheels for stronger acceleration and towing
- Full 409 stainless steel muffler, pipe, and tubing for years of trouble-free, corrosion-resistant service
- Direct-fit design uses all factory hanger locations for an easy at-home installation
- Flow FX straight-through absorption muffler delivers an aggressive yet moderate tone
- Includes flat-band clamps, hardware, and installation instructions — plus Flowmaster’s Lifetime Limited Warranty
- Fits 2017-2026 Ford F250/F350 Super Duty 6.2L, 6.8L & 7.3L gas engines in both 2WD and 4WD
-
- Delivers max dyno gains of 16 hp and 18 lb-ft at the rear wheels for a real performance upgrade
- Flow FX series muffler produces an aggressive-to-moderate sound level to match your driving style
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and resists corrosion
- Custom 304 Stainless Steel Teardrop tip exits through the bedside for a bold, distinctive look
- Includes new hangers and all hardware, using factory mounting locations for easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a deep, mellow, moderate exhaust tone that stands apart from chambered mufflers
- Large 4.0-inch straight-through stainless perforated core for strong flow on large-displacement gas engines
- Fully MIG-welded, bright 409 stainless steel construction for show-quality looks and durability
- Reversible internal flow design installs in either direction to fit your vehicle
- Universal 4.0-inch inlet and outlet with a compact 24-inch case for flexible fitment
- Economical Flow FX series muffler with embossed logo on both sides
Showing 121–143 of 143 results
