Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Mishimoto Silicone Radiator Hose Kit – Nissan Sentra SR20 1991-1999
$105.95
-
17-20 Honda Civic Si (Coupe/Sedan - 1.5 - FWD) Exhaust System Kit
$1,699.93
-
Injen Technology Air Filter - X-1051-B INJ-X-1051-B
$91.53
-
Injen Technology Air Filter - X-1014-B INJ-X-1014-B
Price range: $76.64 through $82.37
-
Ram (6.7) Computer Chip Programmer
$1,438.72
Image
Product
Price
-
- Deep, aggressive Flow FX straight-through sound with maximum flow for real performance
- Built from durable 409S stainless steel throughout for long-lasting corrosion resistance
- Angled side-exit dual tailpipes direct exhaust away from your boat or trailer when towing
- Finished with large 4.50-inch black ceramic-coated 304S stainless tips for a custom look
- Easy at-home install using factory hanger locations, with all hardware and instructions included
- CARB (California) compliant and fits both 2- and 4-Wheel Drive applications
-
- Straight-through Flow FX muffler delivers a moderate, deep and powerful tone with minimal interior resonance
- 409 stainless steel construction and 16-gauge mandrel-bent tubing for durability and unrestricted flow
- 4.50-inch black ceramic-coated 304 stainless steel tip embossed with the Flowmaster name
- Uses factory hanger locations with all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- High-tucked tailpipe routing helps protect the system over rocky, uneven terrain
-
- Adds up to 7 hp and 6 lb-ft at the rear wheels over stock for a real, measurable gain
- Flow FX muffler delivers a moderate/mild tone — aggressive sound without cabin drone
- Mandrel-bent 2.5-inch 409 stainless steel construction for maximum flow and lasting durability
- Larger 4.00-inch black ceramic-coated tips with embossed logo for a bold custom look
- Uses factory hangers and includes all hardware for a straightforward bolt-on install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Bolt-on performance with maximum dyno gains of 21 hp and 26 lb-ft at the rear wheels
- Durable 409 stainless steel construction throughout for long-term corrosion resistance
- Deep, moderately aggressive Flow FX straight-through sound tuned for daily driving and towing
- Dual mandrel-bent tailpipes exit through factory bezels to keep the stock dual exhaust look
- CARB compliant and legal in all 50 states
- Uses factory hangers and includes hardware and instructions for easy at-home installation
-
- Direct fit for 1996-1999 Chevy/GMC 1500 Extended Cab / Short Bed 5.7L with dual cats
- 409 stainless steel with 16-gauge, 3.0″ to 2.5″ mandrel-bent tubing for unrestricted flow
- Straight-through Flow FX muffler delivers a deep exterior tone with a very mild cabin sound
- Dual 4.50″ black ceramic-coated 304 stainless tips, embossed with the Flowmaster name
- Installs at home using factory hangers with all hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, moderate exhaust tone from straight-through Flow FX mufflers with large 3.00-inch cores
- Dual 3.00-inch mandrel-bent stainless steel tubing for smooth, high flow
- Bolt-on install using factory hanger locations — includes all parts, hardware, and instructions
- Aggressive 4.50-inch black ceramic coated tips with embossed logo fill the factory cutouts
- CARB compliant and backed by a Lifetime Limited Warranty
- Application-specific fit for 2013-2014 Mustang GT and 2013 Boss 302 5.0L models
-
- Complete bolt-on cat-back kit that connects to the factory flange and uses factory hanger locations for an easy install
- Deep, powerful sound outside the truck with a moderate, drone-free tone inside the cab
- Durable stainless steel with 3.00-inch mandrel-bent tubing and a straight-through Flow FX muffler for smooth flow
- Finished with a large 4.50-inch black ceramic coated tip embossed with the Flowmaster name
- CARB (California) compliant and includes all parts, hardware and detailed instructions
- Engineered specifically for 2015-2020 Ford F-150 2.7L, 3.3L, 3.5L Ecoboost, 3.5L Ti-VCT and 5.0L engines
-
- Dyno-proven power gains of up to +26 hp and +39 lb-ft at the rear wheels
- Durable 409 stainless steel construction throughout for lasting corrosion resistance
- 3.5-inch to dual 2.50-inch mandrel-bent pipes with a Flow FX straight-through muffler for a moderate tone
- Easy at-home install using factory hanger locations, with instructions and all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Connects to factory rear-bumper exhaust tips for a stealthy, OEM-inspired look
-
- Adds real power — up to 18 hp and 21 lb-ft at the rear wheels from the straight-through Flow FX muffler
- Aggressive yet moderate exhaust note with a deep, performance-oriented Flow FX sound
- Durable 409 stainless steel construction with dual 2.50-inch mandrel-bent tailpipes
- Side-exit tailpipes angle exhaust away from your boat or travel trailer when towing
- Finished with 4.50-inch black ceramic-coated 304S stainless tips for a bold custom look
- Easy at-home install using factory hangers, plus an included hanger and all necessary hardware
-
- Dual-mode design delivers a refined performance tone daily and a deep, open exhaust sound at the push of a button
- Wireless W.A.V.E. Technology™ with two included key fobs makes switching sound modes effortless
- Direct-fit for 2009-2024 RAM 1500 (Classic body) 5.7L Hemi trucks with factory dual exit exhaust
- Durable mandrel-bent 409 stainless steel construction throughout for long-lasting performance
- Complete kit includes actuator motor, control unit, wiring, clamps, and detailed instructions
- Uses factory hangers and OEM-style exit for a clean, straightforward installation
-
- Deep, aggressive exhaust tone and increased performance from the Flow FX series muffler
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Durable 3.0-inch mandrel-bent 409 stainless steel tubing built for maximum exhaust flow
- Direct-fit design uses factory hanger locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2007-2018 Jeep Wrangler JK models with the 3.6L or 3.8L engine
-
- Exclusive Scavenger Series Y-pipe uses back-to-back D-shaped ports for a stronger scavenging effect that helps build power and torque
- Straight-through Flow FX muffler delivers a deep, powerful sound outside with a moderate tone inside the cab
- Large 4.50-inch black ceramic-coated tip embossed with the Flowmaster name for an aggressive, finished look
- Bolt-on install uses factory hanger locations and includes all necessary parts, hardware, and detailed instructions
- CARB (California) compliant with Emission Code 5 for street-legal peace of mind
- Purpose-built fitment for the 2017-2024 Nissan Titan 5.6L, ideal for daily driving and towing
-
- Full stainless steel construction with mandrel-bent tubing for smooth, unrestricted exhaust flow
- Straight-through Flow FX muffler delivers a deep, aggressive sound outside with a moderate tone inside the cab
- Finished with a large 4.50-inch black ceramic-coated tip embossed with the Flowmaster name
- Bolts to factory hanger locations and includes all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and street legal in all 50 states
- Direct fit for 2019-2023 Ford Ranger 2.3L EcoBoost 2WD/4WD EC/CC with 126.8-inch wheelbase
-
- Deep, aggressive Flow FX muffler tone with increased performance for the 2016-2023 Tacoma 3.5L
- 3.0-inch mandrel-bent 409 stainless steel tubing delivers maximum exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolts to factory hanger locations with all necessary hardware included for an easy install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, powerful exterior sound with a moderate tone inside the cab thanks to the Flow FX straight-through muffler
- Stainless steel construction with 3-inch mandrel-bent tubing for durable, unrestricted exhaust flow
- Large 4.50-inch black ceramic coated tip embossed with the Flowmaster name for a bold finish
- CARB (California) compliant and engineered specifically for the 2020-2026 Jeep Gladiator 3.6L
- Uses factory hanger locations and includes all parts, hardware, and detailed instructions for easy at-home installation
-
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Dyno-proven gains of 4 hp and 5 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Aggressive Flow FX series muffler delivers a bold, performance-tuned sound
- Bolts on using factory hangers with all necessary hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Two exhaust modes in one muffler — a moderate performance tone for daily driving and an aggressive open-exhaust sound activated with the wireless key fob
- W.A.V.E. Technology wireless active by-pass valve redirects exhaust through a 3.00-inch turndown for deep, open sound on demand
- Direct-fit installation uses factory hangers and connects to the factory tailpipe — no cutting required
- Durable 409 stainless steel body, mandrel-bent tubing, and round turndown tip built to resist corrosion
- Complete kit includes actuator motor, control unit, two wireless key fobs, wiring, clamps, hardware, and instructions
- Delivers maximum dyno gains of 9 hp and 11 lb-ft at the rear wheels on 2019-2026 Silverado/Sierra 1500 5.3L trucks
-
- Dual-mode performance: enjoy a moderate tone during daily driving and unleash a deep, aggressive open exhaust sound with the push of a button
- W.A.V.E. wireless active valve system comes complete with actuator motor, control unit, and two key fobs for on-demand sound control
- Direct-fit design uses the factory hanger and OEM-style exit for a straightforward bolt-on installation
- Durable 409 stainless steel body, tubing, and 3.00-inch turndown tip built to resist corrosion
- Clamps, wiring, hardware, and detailed instructions included so everything you need is in the box
- Fits 2019*-2024 and 2026 RAM 1500 5.7L Hemi trucks with either factory single or dual tailpipes
-
- Aggressive yet moderate Flow FX straight-through muffler tone with maximum performance airflow
- Durable 409 stainless steel construction with corrosion-resistant 304S stainless tips
- Dual side-exit tailpipes angled behind the rear wheels to direct exhaust away when towing
- Large 4.50-inch black ceramic coated tips with embossed logo for a custom look
- Bolt-on install using factory hangers plus included extra hanger, hardware, and instructions
- CARB (California) compliant for 2016-2023 Toyota Tacoma 3.5L, 2WD/4WD, all wheelbases
-
- Deep, moderately aggressive sound from Flow FX straight-through mufflers and the Scavenger Series X-pipe
- Retains Factory Active Exhaust Valves so you keep your Challenger’s adjustable exhaust character
- Quad 3.50-inch black ceramic-coated 304 stainless tips with embossed Flowmaster logo for an aggressive factory-style look
- CARB (California) compliant with Emission Code 5
- Bolts to factory hanger locations and includes all necessary parts, hardware, and detailed instructions
- Mandrel-bent 3.00-inch stainless tubing purpose-built for 2015-2023 Challenger 6.2L/6.4L Hemi, including Hellcat
-
- Deep, aggressive exhaust tone from the tuned Flow FX series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up using factory hangers and mounting locations with all hardware included for easy installation
- Fits 2009-2014 Ford F-150 with 3.5L EcoBoost, 4.6L, 5.0L, and 5.4L engines and is CARB compliant
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive-to-moderate exhaust note from the Flow FX series muffler gives your Tundra a deeper, purposeful sound
- Dyno-proven gains of 5 hp and 6 lb-ft of torque at the rear wheels
- Turndown dump-exit design eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Uses factory mounting locations with all hardware included for an easy bolt-on install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Durable 409 stainless steel construction built to handle the long haul
- Straight-through Flow FX muffler delivers a deep, moderate performance tone
- Dual side-exit tailpipes direct exhaust away from your boat or trailer when towing
- Large 4.50-inch black ceramic coated 304S stainless tips add a custom look
- Bolt-on install using factory hangers, with all hardware and instructions included
- CARB (California) compliant for legal fitment
-
- Aggressive Flow FX “straight-through” muffler tuned for a deep performance sound and maximum flow
- Durable 409 stainless steel construction with 3.0-inch to dual 2.50-inch mandrel-bent pipes
- Dual 4.0-inch black ceramic-coated 304S stainless tips with laser-etched Flowmaster logo
- Bolt-on install using all factory hanger locations, with instructions and hardware included
- CARB (California) compliant and backed by Flowmaster’s lifetime Limited Warranty
- Specifically engineered for 2009-2013 GM Silverado/Sierra 1500 5.3L trucks
Showing 1–24 of 143 results
