Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Magnum FORCE AFE-59-00081 Cold Air Intake System Spare Parts Kit (3-1/2 IN ID to 3 IN ID x 3-1/2 IN L) Straight Reducing Bellow-Coupler - Black
$38.00
-
13-15 Audi RS5 Base (Coupe - 4.2 - AWD) Exhaust System Kit (3020-32010)
$2,179.53
-
Can-Am Engine Cold Air Intake Performance Kit
$386.92
-
15-18 Porsche Macan (Sport Utility - 3.0, 3.6 - AWD) Exhaust System Kit - Diamond Black (3020-43040)
$1,753.23
-
Mishimoto Performance Air Intake for 2022+ Subaru WRX
$444.95
Image
Product
Price
-
- Delivers improved throttle response, power, and mileage with a moderate, refined tone
- Includes both dual-out-the-rear and dual-out-the-side tailpipes so you can match your setup to your lifestyle — side exits recommended for towing
- Built with a stainless steel PRO Series oval-case muffler and mandrel-bent stainless tubing for durability and smooth flow
- Uses factory hanger locations for an easy, hassle-free at-home installation with all hardware included
- CARB compliant (Emission Code 5) for street-legal confidence
Quickview
-
- Deep, mellow, mild sound level from the 50 Series Big Block™ muffler — refined inside and out
- 3.00-inch mandrel-bent aluminized steel piping for smooth, consistent flow
- True bolt-on install using factory hanger locations with all hardware included
- Large 4.00-inch polished stainless steel tip for a clean finished look
- Emissions-legal and CARB (California) compliant, backed by a 3-year Limited Warranty
- Custom-fit for 1996-1999 Tahoe/Yukon 5.7L, 2-door models (2WD/4WD)
Quickview
-
- 3.00-inch mandrel-bent 16-gauge aluminized steel tubing keeps flow smooth and consistent while resisting corrosion
- Pre-bent, direct-fit design saves you the hassle of fabricating your own bends
- Tucks high in the chassis for great clearance and exits at the rear quarter panel with a turned-down angle
- Purpose-built to pair with Side Inlet/Center Outlet mufflers like the Super 44 (943046) or 50 Series (943051)
- Backed by Flowmaster’s 3-Year Limited Warranty
Quickview
-
- Complete cat-back exhaust system with the 70 Series Big Block II™ muffler (PN 53070) included
- Deep, mellow tone with minimal interior resonance for a moderate, refined sound level
- Single 3.00-inch mandrel-bent tailpipe exits passenger-side behind the rear wheel — ideal for towing
- Durable aluminized steel construction with easy bolt-on install using factory hanger locations
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
- Fits 1998-2001 Ram 1500 (3.9/5.2/5.9L) and 1998-2002 Ram 2500/3500 (5.9L), 2WD & 4WD, all wheelbases
Quickview
-
- Bolt-on Flowmaster Force II cat-back system designed for 1987-1993 Ford F-250/F-350 7.5L trucks with a 2.50-inch catalytic converter
- 70 Series Big Block II muffler delivers a deep, mellow, moderate tone inside and out
- 3.00-inch mandrel-bent 16-gauge aluminized steel inlet and tailpipe with an angle-cut turn-down tip for improved flow
- CARB compliant and emissions-legal, backed by a 3-year Limited Warranty
- Includes new hangers, U-bolt clamps, and an aluminum heat shield for a quick, at-home install using factory hanger locations
- Fits 2WD/4WD and all wheelbases, including Crew Cab
Quickview
-
- High Flow 200 Cell Metallic Substrate handles severe-duty, high-temperature applications
- Compact 4.00 in. x 8.00 in. spun stainless steel casing fits into tight spaces
- 3.00-inch weld-on, slip-fit inlet/outlet makes custom exhaust integration straightforward
- Meets all EPA 49-state requirements for eligible builds
- Ideal ‘green’ solution for Pre-OBDII racing setups and vintage hot rods without factory converters
- Backed by Flowmaster quality with a universal, round 3-Way design
Quickview
-
- Race-derived Super 40 Series with Flowmaster Delta Flow® technology for strong performance and a deep, aggressive sound
- Larger case profile excels on forced induction and high horsepower vehicles
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to real exhaust heat
- Universal fitment with a 2.25″ inlet for versatile Dodge, GMC, and Plymouth street/strip builds
- Delivers powerful tone with low interior resonance for a refined driving experience
Quickview
-
- Premium-grade 3-Way converter engineered to help keep the MIL / check-engine light off
- USA-made stainless steel construction for maximum durability under heat and daily use
- Excellent flow characteristics with a 2.50 in. slip-fit inlet and outlet for custom builds
- Universal fitment covers a wide variety of applications up to 5.9L and 6000 lb GVW
- Meets federal EPA emissions requirements (49-State / Federal — not for California use)
Quickview
-
- Super 44 Series mufflers deliver an aggressive, deep and powerful Fox body 5.0L sound
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and dual aluminized tailpipes
- Bolt-on install using factory hanger locations, with all hardware and instructions included
- CARB (California) compliant and emissions legal for street-legal peace of mind
- Fits 1986-1993 Mustang LX and 1986 GT 5.0L coupes and convertibles
Quickview
-
- Delta Flow® technology delivers deep, aggressive sound with low interior resonance and no cabin drone
- 16 gauge aluminized steel with full MIG welds for maximum durability under heat and hard use
- Larger case profile excels on forced-induction and high-horsepower street/strip vehicles
- Universal 2.50″ inlet fitment makes it a versatile foundation for custom exhaust builds
- Race-derived Super 40 Series design brings Top Ten race muffler performance to the street
Quickview
-
- Exclusive 80 Series Crossflow muffler delivers a deep, moderate tone inside and out
- Complete dual 2.50-inch mandrel-bent system with built-in H-pipe crossover for balanced flow
- Purpose-fit for 1967-1974 Camaro/Firebird and 1968-1974 Nova classic muscle cars
- Includes all parts, U-bolt hardware, and illustrated instructions for a straightforward install
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
- Aluminized steel construction with the muffler tucked high behind the rear differential for clean clearance
Quickview
-
- True dual exhaust custom designed for most 1964-1972 GM A-body cars
- Mandrel-bent 2.50-inch aluminized steel tubing for smooth, unrestricted flow
- H-pipe equalizes exhaust pressures for improved sound and performance
- Includes two styles of tailpipe exits plus all hardware and instructions
- Mufflers sold separately so you choose your exact sound level
- CARB compliant and backed by a 3-year Limited Warranty
Quickview
-
- Delivers the signature aggressive Flowmaster 40 Series tone, both inside and out
- Built from durable 16 gauge aluminized steel and fully MIG welded for strength
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with a 2.25″ inlet and compact 19.00″ overall length for flexible installs
- A proven, iconic choice for street rod and custom exhaust builds
Quickview
-
- Deep, powerful sound from the 80 Series Cross-flow muffler with a moderate-to-aggressive exterior tone and mild-moderate interior tone
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes finished with polished stainless steel tips for a muscular look
- Improves throttle response, power, and mileage as part of a complete Flowmaster cat-back system
- Bolts to factory hanger locations with U-Bolt clamps and includes all hardware for easy installation
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
Quickview
-
- Specific fitment for 1963–1974 Dodge/Plymouth A-Body cars for a factory-like rear exit
- 2.5-inch, 16-gauge aluminized steel resists heat and corrosion
- Mandrel-bent tubing keeps flow strong through every bend
- Dual kit designed for offset inlet/outlet mufflers, exiting straight out the rear under the bumper
- Skip the hand bending—add a clean, correct tailpipe to any custom exhaust build
- Covered by Flowmaster’s three-year limited warranty
Quickview
-
- Classic HP-2 laminar flow core for proven performance and a moderate, refined tone
- Polishable 304 stainless steel case for durability and a show-quality finish
- Compact square case delivers sleek styling and easier under-vehicle packaging
- Universal 2.50 in. inlet design ideal for truck and SUV exhaust builds
- Backed by Flowmaster’s Lifetime Limited Warranty
Quickview
-
- Deletes the restrictive factory resonator to boost your Mustang’s sound and performance
- Direct fit for 2015-2023 Ford Mustang 2.3L EcoBoost coupes and convertibles
- Mandrel-bent stainless steel with D-port tech and a Scavenger Series Y-collector for clean, consistent flow
- Runs with factory rear mufflers or a Flowmaster Axle-back exhaust system
- Includes all parts, hardware, and easy-to-follow instructions for a straightforward install
- Backed by the Flowmaster Lifetime Limited Warranty
Quickview
-
- True-dual, mandrel-bent 3.00-inch aluminized steel construction with a built-in H-pipe crossover for maximum flow and power
- Dual Super 40 Series mufflers deliver a deep, powerful, aggressive exhaust note
- Custom-bent tailpipes tuck high and exit cleanly at the quarter panels for a purposeful look
- Complete crossmember-back kit includes mufflers, hangers, and U-Bolt hardware for a straightforward install
- CARB (California) compliant and covered by a 3-year Limited Warranty
- Purpose-built for 1967-1969 Camaro and Firebird V8s from 307 through 427 cubic inches
Quickview
-
- Iconic deep, aggressive-to-moderate tone from a pair of Super 44™ Series mufflers
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and dual tailpipes for improved flow
- Bolts to factory hanger locations with included U-bolt hardware and instructions for easy installation
- Long 2.50-inch 304 stainless steel tips deliver a genuine show-car look
- Emissions legal and CARB (California) compliant for the 1998 Mustang GT and Cobra 4.6L
Quickview
-
- Complete 2.50-inch crossmember-back dual exhaust for most 1964-1972 GM A-body cars
- Includes a pair of Super 40 Series mufflers for a moderately aggressive exterior and moderate interior tone
- H-pipe and all mandrel-bent aluminized steel tubing for maximum flow, power, and throttle response
- Two tailpipe exit style choices with tailpipes tucked up for maximum clearance
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
- Ships with all necessary parts, hardware, and U-bolt clamps for an easy install
Quickview
-
- HP core design and Laminar Flow internal configuration deliver excellent sound control with a moderate to aggressive tone
- Built with 409S stainless steel internals and a polishable 304 stainless steel casing for durability and looks
- Cool shell technology minimizes radiant heat from the muffler body
- Compact design fits applications where under-chassis space is limited
- Universal fitment suits trucks, SUVs, sport compact imports, muscle cars, and more
- 2.00-inch inlet diameter with a proprietary insulation wrap for refined performance
Quickview
-
- True dual exhaust with all mandrel-bent 3.00-inch aluminized steel tubing for smooth, unrestricted flow
- Integrated H-pipe equalizes exhaust pressures for balanced sound and maximum performance
- Sold minus mufflers so you choose your own Flowmaster sound level and tips
- Custom designed for most 1967-1969 Chevrolet Camaro and Pontiac Firebird for an easy fit
- CARB (California) compliant and backed by a 3-year Limited Warranty
- U-Bolt clamping and generous clearance make for a clean, straightforward installation
Quickview
-
- Delivers the original, aggressive Flowmaster 40 Series tone inside and out
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet and compact 19.00″ length for custom builds
- High-temperature paint finish stands up to real exhaust heat
- Ideal performance muffler for street rods and custom exhaust systems
Quickview
-
- Revolutionary HP core with Laminar Flow design delivers excellent sound control and a moderate to aggressive tone
- Compact build fits vehicles with limited under-chassis space — ideal for sport compacts, muscle cars, and more
- Cool shell technology minimizes radiant heat from the muffler body in tight engine bays
- 304S stainless steel internals and a polishable 304 stainless casing look as good as they perform
- Universal fitment with a 2.25″ inlet makes it a versatile choice for street/strip builds
Quickview
Showing 2857–2880 of 15427 results
