Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Mishimoto DuraCore Silicone Boot Kit – 7.3L Ford Powerstroke 1999-2003
$219.95
-
Cadillac, Chevrolet, GMC (4.3, 5.3, 6.0, 6.2) Computer Chip Programmer (20617)
$763.80
-
Mishimoto Silicone Radiator Hose Kit for 1997-2006 Jeep Wrangler
$136.95
-
Mishimoto Oil Catch Can System for 2016-2026 Mazda MX-5 Miata
$199.95
-
Magnum FORCE AFE-51-10322-p Stage-2 Cold Air Intake System Audi A4 (B6) 02-05 L4-1.8L(t)
$399.00
Image
Product
Price
-
- Deep, mellow tone from the 70 Series Big Block II muffler with moderate interior and exterior volume
- Full mandrel-bent aluminized steel piping with a brushed stainless turndown tip exiting below the rear bumper
- CARB compliant and emissions-legal for regulation-conscious owners
- Bolt-on install using factory hanger locations, with all parts and U-bolt hardware included
- Custom fit for 1998-2003 Dodge Durango 4.7L, 5.2L and 5.9L in both 2WD and 4WD
- Backed by a 3-year Limited Warranty from Flowmaster
Quickview
-
- Bolt-on cat-back system engineered specifically for the 5.0L Fox body Mustang, using factory hanger locations for quick installation
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes restore flow and preserve pipe diameter
- 50 Series Delta Flow mufflers deliver a moderate, deep and powerful tone that complements the iconic 5.0L
- Dual long 2.50-inch polished 304 stainless steel tips add a genuine show-car look
- Emissions legal and CARB (California) compliant, with all hardware and instructions included
- Fits 1987-1993 Mustang LX and 1986 Mustang GT (5.0L) coupes and convertibles
Quickview
-
- Replaces restrictive cast iron manifolds to boost throttle response, power and engine efficiency on GM Big Block engines
- Stainless steel construction with silver ceramic coating for durability and heat management
- 2 in. primary tubes and a 3.50 in. ball flange collector for strong, leak-free performance
- 3/8 in. thick flanges and 16-gauge tubing built to High Performance grade standards
- Includes gaskets, reducers, collectors and hardware for an easy, complete installation
Quickview
-
- Long tube, equal length design with 1-3/4 inch primary tubes for balanced scavenging and improved throttle response, power, and engine efficiency
- Stainless steel construction with a silver ceramic coating for maximum heat and corrosion durability
- 3/8 inch thick flanges and 3.00 inch ball flange collector connections ensure a rigid, leak-free installation
- Complete package includes collector, reducers, gaskets, and mounting hardware for an easier install
- Purpose-built to replace restrictive factory cast iron manifolds on Ford Small Block engines
Quickview
-
- True dual 3.00-inch mandrel-bent aluminized steel design maximizes exhaust flow and delivers a deep, aggressive muscle car tone
- Super 40 Series mufflers in a large case are built to handle high horsepower while producing a muscular sound
- Integrated H-pipe crossover balances exhaust pressures to add hp and torque and reduce deceleration back-rap
- Improves throttle response, power, and mileage — the signature benefits of a Flowmaster system
- CARB (California) compliant and includes all necessary parts and hardware for an easy bolt-on installation
- Backed by Flowmaster’s 3 Year Limited Warranty
Quickview
-
- Deep, aggressive sound from a matched pair of Super 44 Series mufflers with Delta Flow technology
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Bolt-on installation using factory hanger locations with all U-Bolt hardware and instructions included
- Emissions legal and CARB (California) compliant for street-legal peace of mind
- Dual tailpipes finished with long 2.50-inch polished 304 stainless steel tips for a show-car look
- Fits 1994-1997 Mustang GT and Cobra 4.6L or 5.0L coupes and convertibles
Quickview
-
- Aggressive exterior tone with a moderate interior sound level for a bold yet livable ride
- Outlaw series stainless steel muffler with dual 2.50-inch mandrel-bent tailpipes for smooth flow
- Large 4.00-inch tips with embossed logo complete the aggressive look
- Bolt-on axle-back design uses factory hangers and includes all hardware for easy at-home install
- CARB compliant and emissions-legal, fitting 2012-2018 Jeep Wrangler JK 3.6L (2 and 4 door)
- Backed by Flowmaster’s Lifetime Limited Warranty
Quickview
-
- Bolt-on, emissions-legal cat-back designed for 1994-1997 Mustang GT and Cobra with the 4.6L SOHC or 5.0L engine
- Delivers the iconic deep, aggressive 90s Mustang sound via a pair of Super 44 Series mufflers
- 2.50-inch aluminized steel mandrel-bent tubing for smooth, free-flowing performance
- Factory-style flanges and factory hanger locations make installation quick and easy
- CARB (California) compliant and emissions legal for street use
- Includes all necessary hardware and easy-to-follow instructions; fits coupes and convertibles
Quickview
-
- Complete crossmember-back dual exhaust engineered specifically for 1964–1972 El Camino/Sprint V8, 2WD applications
- 2.50-inch mandrel-bent aluminized steel with a built-in H-pipe for equalized pressures, no deceleration backrap, and maximum power
- Super 50 Series mufflers deliver a deep, aggressive exterior tone with minimal interior drone
- 3.00-inch angle-cut polished stainless tips exit behind the rear wheels for an aggressive muscle-car look
- CARB compliant and includes all necessary parts and hardware for an easy fit
- Improves throttle response, power, and mileage like all Flowmaster systems
Quickview
-
- Replaces restrictive factory manifolds for improved throttle response, power, and engine efficiency on GEN 3 HEMI engines
- Stainless steel construction with a durable Silver Ceramic coating for heat and corrosion resistance
- 1-3/4 inch unequal-length primary tubes and 16-gauge tube walls for performance airflow and long-term strength
- 3/8 inch laser-cut flanges with a 2.50-inch factory collector connection for a direct-fit, leak-free install
- Includes gaskets, collector, and necessary M8 hardware to simplify installation
- 50-state legal for 2009-2016 models under CARB E.O. #D-698-19 and EPA Memo 1A compliant for 2017-2022 applications
Quickview
-
- Delivers improved throttle response, power, and mileage in a bolt-on cat-back upgrade
- Includes the 70 Series Big Block II muffler (P/N 53073) for a deep, mellow tone
- Mild, refined sound — moderate outside and mild-to-moderate inside the cab
- Turn-down tip exit routes exhaust away from your boat or trailer, ideal for towing
- 3.00-inch mandrel-bent aluminized steel with factory hangers for easy installation
- CARB (California) compliant and configured for 4WD Standard Cab / Long Bed trucks
Quickview
-
- Delivers performance equal to or surpassing open pipe systems, proven at the dyno and track
- Dramatically reduces sound across the RPM range for a moderate tone without sacrificing flow
- Universal fitment with a 3.00″ inlet and 3.63″ outlet — ideal for custom high-flow builds
- Handles the toughest applications: street trucks, diesel pullers, RV pushers, and racing on dirt or asphalt
- High-temperature paint finish built to withstand demanding, high-heat race use
- Backed by Flowmaster’s Pro Series engineering for serious performance builds
Quickview
-
- Delivers a deep, powerful, aggressive tone from a pair of Super 44 Series mufflers
- Mandrel-bent 2.50-inch aluminized steel pipes support improved throttle response, power, and mileage
- Bolts on using factory exhaust hangers with all necessary parts and hardware included
- Dual tailpipes exit straight out the back with a turn down at the lower valance for a clean look
- CARB (California) compliant and backed by a 3-year Limited Warranty on aluminized steel systems
- Fits 2WD Coupes and Convertibles, with an optional stainless steel version available
Quickview
-
- Fully polished stainless steel with double-wall construction for lasting shine and durability
- Easy clamp-on installation — no welding required
- Bold 2-1/2 inch inlet to 3-1/2 inch round outlet for an aggressive step-up look
- Embossed Flowmaster logo and angle-cut styling for a premium finished appearance
- Universal mounting orientation fits 2.50 inch exhaust piping across many applications
- 13-inch length provides full, integrated coverage at the rear of the vehicle
Quickview
-
- Fully polished stainless steel with double wall construction for lasting shine and durability
- Clamp-on installation means no welding — quick, straightforward upgrade
- Angle-cut round design with a 4-inch outlet for a bold, aggressive rear-end look
- Embossed Flowmaster logo delivers authentic, brand-backed styling
- Universal mounting orientation fits 3-inch tailpipes across a wide range of applications
- Sold individually so you can order exactly what your single or dual setup needs
Quickview
-
Flowmaster American Thunder Cat-back Exhaust System – Super 40 Series, Aggressive / Moderate (17248)
- Deep, powerful sound from large-case Super 40 Series mufflers with a moderate-to-aggressive exterior tone and mild-to-moderate interior tone
- Improved throttle response, power, and mileage thanks to smooth mandrel-bent aluminized steel tubing
- Muscular looks with dual 2.50-inch tailpipes and dual 3.00-inch polished stainless steel tips
- Easy bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
Quickview
-
- Complete 2.50-inch dual exhaust custom designed for 1964-1966 Ford Mustang (non-GT, hardtop, 2WD)
- Pair of 40 Series Delta Flow mufflers delivers a deep, powerful sound with moderately aggressive exterior and moderate interior tone
- 16-gauge aluminized steel with all mandrel-bent tubing and an H-pipe for improved throttle response, power, and mileage
- Polished stainless steel tailpipe tips that tuck up for maximum clearance and a show-car look
- Includes all necessary parts, hardware, and instructions for an easy install, backed by a 3-Year Limited Warranty
- CARB (California) compliant with U-bolt clamping for a secure, straightforward fit
Quickview
-
- Gasket-free ball flange design creates a leak-free connection without an exhaust flange gasket or donut gasket
- Replaces typical three-bolt flange-type connections with a stronger, self-aligning collector joint
- Aluminized 16-gauge build with 3/8 header flange thickness for high-performance durability
- Inside diameter slip-fit ends (3.00 inlet, 2.50 outlet) make welding and fitment straightforward
- Reversible flange sold in pairs with bolts and studs included for a complete connection
- Works as an exhaust pipe repair kit alternative when rebuilding a leaky collector
Quickview
-
- Universal U-Fit Dual kit with enough mandrel-bent tubing to fabricate a complete custom dual exhaust system
- Twelve 2.25-inch pieces plus four 2.00-inch crossover components for a fully tailored layout
- Durable 16-gauge Aluminized steel construction in a silver finish built to last
- Slip-fit design with U-Bolt clamping for easy adjustment during fabrication
- CARB (California) compliant, Emission Code 5
- Mix and match your own mufflers and tips (sold separately) for the exact sound and flow you want
Quickview
-
- 2.50-inch mandrel-bent 16-gauge stainless steel tubing delivers maximum flow through smooth bends
- Dual configuration with long, polished 304 stainless steel tips for a bright, aggressive rear exit
- Pre-bent to tuck high in the chassis for good clearance and a straight-out exit under the rear bumper
- Engineered to pair with Side Inlet / Opposite Side Outlet mufflers like the Super 44 (842548) or 50 Series (842553)
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
Quickview
-
- Universal U-Fit Dual kit lets you fabricate a complete custom dual exhaust system on street rods, muscle cars, and pickups
- Built from durable 16-gauge Aluminized steel with a clean silver finish for long-lasting corrosion resistance
- Includes twelve 2.50-inch tubing pieces plus four 2.00-inch crossover components in selected bend configurations
- Slip-fit design with U-Bolt clamping makes positioning and securing your exhaust routing straightforward
- CARB (California) compliant with Emission Code 5
- Mix and match your own mufflers and tips (sold separately) to dial in the exact sound and style you want
Quickview
-
- Built from 2.50-inch mandrel-bent 16-gauge stainless steel for maximum flow and long-lasting durability
- Direct-fit, specific-fit design tucks up high for good clearance and exits straight-out under the rear bumper
- Engineered to pair with Side Inlet/Opposite Side Outlet mufflers like the Super 44 (842548) and Super 50 (852558)
- Backed by Flowmaster’s Lifetime Limited Warranty
- High-performance grade construction with a natural stainless finish and flat band clamping
Quickview
-
- Dyno-proven power gains of +9 hp and +12 lb-ft at the rear wheels
- Durable 409 stainless steel construction with a Lifetime Limited Warranty
- Flow FX straight-through muffler delivers a moderate tone with maximum performance
- 4.50-inch black ceramic tips and dual side-exit design for an aggressive custom look
- Bolt-on install using factory hangers, with all hardware and instructions included
- CARB compliant (Emission Code 5) and legal in all 50 states
Quickview
-
- Adds max dyno gains of 13 hp and 16 lb-ft of torque at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Flow FX muffler delivers an aggressive-to-moderate exhaust tone
- Larger 4.50-inch black ceramic-coated tip with embossed logo for a custom look
- Bolt-on install using factory hangers with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Quickview
Showing 2905–2928 of 15427 results
