Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Flowmaster 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Flowmaster Pro Series Shorty Muffler
$228.95
-
AEM-21-2128DK DryFlow Air Filter
$79.99
-
No-Drop Series Plus Fuel System for 2019-2020 Dodge RAM Cummins 6.7L (1200-1500hp) FASS
$1,045.16
-
aFe Power AFE-35-10003C Carbon Cabin Air Filter
$23.00
-
Edge Products Juice w/Attitude CS2 Programmer - EDG-31407
$1,055.95
Image
Product
Price
-
- Valved SwitchPath™ Mufflers replace the rear Track Edition straight sections for on-demand sound control
- Retains factory valve behavior and on-board controls — no aftermarket switch needed
- Durable T304L Stainless Steel construction with a 3-inch tubing diameter
- No tune required, backed by a No CEL Guarantee for a worry-free install
- Fit Guarantee and 50 State Legal voluntary labeling for the 4.0 RWD AMG sedan
Quickview
-
- Valved SwitchPath™ Mufflers let you take full control of your AMG’s sound on demand
- Retains factory valve behavior and on-board controls—no aftermarket switches needed
- Durable T304L Stainless Steel construction with 3-inch tubing
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- AWE Fit Guarantee for a precise, bolt-on fit on the Coupe 4.0 RWD
- 50 State Legal voluntary labeling for straightforward compliance
Quickview
-
- SwitchPath™ Conversion Kit pairs a bespoke muffler with a valved straight section for tone you control
- Factory valve behavior and interior control retained through Audi Drive Select
- Built from durable T304L stainless steel with a 2.5-inch tubing diameter
- 50 State Legal with a No CEL Guarantee and No Tune Required
- Backed by AWE Tuning’s Fit Guarantee for a confident, application-specific install
Quickview
-
- Valved conversion kit with a bespoke driver’s-side muffler and a valved passenger’s-side straight section for a purpose-built sound
- Retains factory valve behavior controlled through your driving modes—quiet when you want it, aggressive when you don’t
- Built from durable T304L stainless steel with 2.5-inch tubing sized for the Golf R 2.0 AWD platform
- 50 State Legal with a No CEL Guarantee and no tune required for a hassle-free install
- Backed by an AWE Fit Guarantee, engineered specifically for the 2015-2017 Golf R Base hatchback
- Add the AWE SwitchPath™ Remote (sold separately) for complete on-demand control over the exhaust valve
Quickview
-
- Valved conversion kit lets you retain factory valve behavior and control your sound through driving modes
- Premium T304L stainless steel construction for lasting corrosion and heat resistance
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- 50 State Legal voluntary labeling plus an AWE Fit Guarantee for your Audi/VW 2.0 AWD
- Bespoke driver’s-side muffler paired with a valved passenger’s-side straight section
- Pairs with the optional AWE SwitchPath™ Remote for complete on-command valve control
Quickview
-
- Valved tip merges let you control exhaust volume through the factory on-board controls
- Track-to-SwitchPath™ Conversion delivers switchable sound — aggressive or refined on demand
- Durable T304L Stainless Steel construction with 3-inch tubing for high-performance flow
- No tune required and backed by a No CEL Guarantee for a clean, hassle-free install
- 50 State Legal and covered by the AWE Fit Guarantee for the 18-23 BMW M5 4.4 AWD Sedan
Quickview
-
- Drops Intake Air Temperatures by up to 31°F over stock — nearly a 25% reduction for more consistent power
- Enlarged end tank and core package outperforms the stock front mount intercooler
- Aluminum construction, assembled in the USA, with all hardware included
- Re-uses robust factory hoses and clamps to keep installation cost down
- No tune required and backed by AWE’s Fit Guarantee and No CEL Guarantee
- Built to support enhanced software today or a larger turbo upgrade tomorrow
Quickview
-
- Larger frontal area maintains consistent intake air temperatures and reliable power under demanding conditions
- Direct replacement for the factory heat exchanger — fits behind the front bumper and grill assemblies with hardware included
- Aluminum construction ideal for supercharged 3.0T engines, including cars running the AWE Stage 2 Performance Pulley
- Integrated drain plug and bleed screw make bleeding the system simple
- No tune required, backed by a Fit Guarantee and No CEL Guarantee
Quickview
-
- Full aluminum construction with efficient cast end tanks engineered for maximum flow
- Every intercooler assembly is pressure checked before it ships for verified integrity
- No tune required and backed by a No CEL Guarantee for a clean bolt-on upgrade
- Optional AWE carbon fiber shrouds available for a lighter, more aesthetic build
- Complete kit with hardware included and AWE Tuning’s Fit Guarantee
- 50 State Legal voluntary labeling for peace of mind
Quickview
-
- Purpose-built for US-spec Audi 2.7T AWD Sedan and Wagon models — no significant cutting like adapted RS4 units
- Installs in less than half the time of a typical RS4 kit, lowering labor costs
- Aluminum construction with lighter, better-looking carbon fiber shrouds
- Complete kit with hardware included and no tune required
- Backed by AWE’s Fit Guarantee and No CEL Guarantee, assembled in the USA
Quickview
-
- Solves heat-related issues that come with increased turbo boost — perfect for enhanced software or a larger turbo upgrade
- Durable aluminum construction, assembled in the USA
- Backed by AWE Tuning’s Fit Guarantee and No CEL Guarantee
- No tune required and all hardware included for a complete kit
- Purpose-built fitment for 2010-2011 Porsche 911 (997.2) 3.8 AWD Convertible and Coupe
Quickview
-
- Cores 37% larger than stock (422 vs 308 cubic inches) for far greater cooling capacity
- Drops intake air temperatures by a massive 55°F for denser, more reliable power
- High-flow bar and plate cores improve pressure-drop resistance through the core by 1 psi
- 6-ply silicone hoses with stainless steel high-force t-bolt clamps resist bursting under boost
- No tune required and backed by AWE’s No CEL Guarantee and Fit Guarantee
- Aluminum construction, assembled in the USA, with all hardware included
Quickview
-
- 17% larger cores (523 vs 448 cubic inches) for greater cooling capacity than stock
- 20% reduced air temperatures and 50% improved pressure resistance through high-flow bar and plate cores
- Dyno-verified gains of 26 HP and 21 lb-ft at the crank when combined with AWE exhaust, intake, and software
- No tune required, plus Fit Guarantee and No CEL Guarantee for worry-free upgrading
- Aluminum build with in-house cast end tanks, assembled in the USA, hardware included
Quickview
-
- Full-face stainless wire mesh shields the ColdFront™ Heat Exchanger from road debris and small objects
- All-stainless construction with a stainless steel frame for durability and a clean, finished appearance
- Keeps heat exchanger fins undamaged so cooling performance stays at maximum efficiency
- Hardware included and no tune required for a simple, complete install
- Backed by AWE Tuning’s Fit Guarantee and No CEL Guarantee, with a 50 State Legal voluntary label
Quickview
-
- CNC machined from 6061 Billet Aluminum for durability and a premium, engine-bay-ready finish
- Increases supercharger coolant capacity to help lower coolant and air intake temperatures
- True flow-through design actively reduces coolant temperature as it passes through the unit
- Anodized aluminum cap laser etched with the AWE logo makes checking coolant level effortless
- AWE Fit Guarantee and No CEL Guarantee with hardware included and no tune required
- Runs standalone with the factory heat exchanger or alongside the full ColdFront™ product line
Quickview
-
- CNC machined from 6061 Billet Aluminum for lasting durability and a premium engine-bay finish
- True flow-through design actively reduces coolant temperature as fluid passes through
- Increases supercharger coolant capacity to help lower coolant and air intake temperatures
- Anodized, laser-etched aluminum cap makes checking coolant level quick and easy
- No tune required, hardware included, and backed by AWE’s Fit Guarantee and No CEL Guarantee
- Works with other AWE ColdFront™ products or your factory heat exchanger
Quickview
-
- AWE Marking Template guides a precise bumper cut so you get it right the first time
- Purpose-built to help AWE quad-tip systems fit with a clean, factory-integrated look
- Hardware included and no tune required for a straightforward install
- Backed by a Fit Guarantee and No CEL Guarantee for confident fitment
- 50 State Legal voluntary labeling
- Fits BMW Convertible, Coupe, and Hatchback 2.0 in AWD or RWD
Quickview
-
- Doubles coolant flow with a 100% gain in flow-rate over the stock intercooler water pump
- Drops intake air temps an additional 8% when paired with the ColdFront™ Heat Exchanger and Reservoir
- Durable aluminum build engineered by cooling specialists Meziere Enterprises
- Direct replacement for the factory heat exchanger pump — no tune required
- Hardware included and backed by AWE’s Fit Guarantee and No CEL Guarantee
Quickview
-
- Solves heat-related issues from added turbo boost, keeping intake air temperatures low for more power
- Aluminum construction assembled in the USA with all hardware included
- No tune required — install and benefit immediately
- Backed by a Fit Guarantee and No CEL Guarantee for confident installation
- Delivers stable engine output when outside temps climb and the safety margin to push limits
Quickview
-
- Impressive 100% gain in flow-rate over the factory heat exchanger pump
- Additional 8% decrease in intake air temps when paired with the ColdFront Heat Exchanger and Reservoir
- No tune required — direct upgrade with hardware included
- Aluminum construction, assembled in the USA by cooling specialists Meziere Enterprises
- Backed by AWE’s Fit Guarantee and No CEL Guarantee
- Compatible with the stock heat exchanger for a flexible ColdFront build
Quickview
-
- Precision AWE Marking Template lets you cut your bumper perfectly the first time—measure twice, cut once
- Ensures AWE quad tip systems fit like factory, with clean, symmetrical results
- Complete hardware kit with all hardware included—no tune required
- Backed by AWE’s Fit Guarantee for confident installation
- 50 State Legal voluntary label with a No CEL Guarantee
Quickview
-
- Precision AWE marking template lets you cut your bumper perfectly the first time
- Achieves the true AWE quad tip look with a clean, factory-correct fit
- Complete kit with all necessary hardware included
- No tune required and backed by a No CEL Guarantee
- 50 State Legal and covered by AWE’s Fit Guarantee
- Purpose-built for BMW Sedan and Wagon 2.0 AWD/RWD applications
Quickview
-
- Lightweight carbon fiber construction adds a genuine motorsport look under the hood
- S-FLO 4” Coupler transitions 4.5” to 4” to fit aftermarket 4” turbo inlet pipes
- No tune required and backed by a No CEL Guarantee for hassle-free running
- Fit Guarantee ensures the correct match for the Audi 2.5 AWD Coupe/Sedan
- Includes all the hardware needed to complete the installation
Quickview
-
- Eliminates the wind buffeting that plagues the 991 and 992 when driving with a window down
- UV-stabilized injection-molded plastic built to look OEM on the 992
- Factory-matched styling that complements Porsche trim without drawing attention
- Fast, easy install that reuses factory mounting points and included hardware
- No tune required and backed by a No CEL Guarantee plus AWE’s Fit Guarantee
- Purpose-built for 20-24 Porsche 911 Convertible/Coupe (3.0, 3.7), 50 State Legal
Quickview
Showing 1873–1896 of 15427 results
