Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
-
AEM 409
-
aFe Power 2391
-
Airaid 307
-
AWE Tuning 791
-
BBK 199
-
Corsa 57
-
CSF 1637
-
Diablosport 213
-
Dinan 816
-
Edge 175
-
FASS Fuel Systems 296
-
Flowmaster 892
-
Holley 1
-
Injen 595
-
JLT 79
-
K&N Filters 2839
-
Magnum FORCE 539
-
Mishimoto 1958
-
S&B 253
-
Sinister 52
-
Sniper Motorsports 1
-
Superchips 47
-
Takeda 172
-
Volant 176
-
XDR 29
Latest Products
-
CSF 8053 Bar & Plate Intercooler Core
$299.00
-
K&N Filters RX-4730DR Drycharger Air Filter Wrap
$31.99
-
Mishimoto R1193-AT Replacement Radiator for Jeep Cherokee 1991-2001
$149.95 $165.00 -
S&B 75-2503 Cold Air Intake For 88-95 Bronco/F-150/F-250/F-350 Red Oiled Filter
$188.82
-
SNIPER EFI HI-RAM INTAKE MANIFOLD 11-14
$449.95 $1,012.95
Image
Product
Price
-
- Delta Flow® three chamber design with an internal tuning chamber reduces interior resonance while keeping strong exterior tone
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- 3.00-inch inlet with dual outlet location for flexible performance exhaust builds
- Moderate sound level tuned for comfortable late model muscle car driving
- Universal fitment with a protective high-temperature paint finish
Quickview
-
- Crafted from 304 stainless steel with a black ceramic coating for durability and a stealthy blacked-out look
- Double wall construction and an angle-cut end with the embossed Flowmaster logo for a premium, aggressive finish
- Clamp-on design installs without welding — fits over a 3 inch pipe with a bold 4 inch outlet
- Universal mounting orientation makes it a versatile fit for a wide range of cars and trucks
- Backed by Flowmaster’s high-performance grade engineering, measuring 13 inches long with a 4 inch round tip
- Sold individually, so you can order exactly what your single- or dual-exit setup needs
Quickview
-
- Three-chamber Delta Flow design cuts interior resonance while keeping aggressive exterior tone
- 16 gauge aluminized steel with full MIG welds for maximum durability
- Universal fitment and 3.00-inch inlet make it easy to build into custom exhaust systems
- Dual outlet location gives flexible routing for cat back and custom setups
- Moderate sound level tuned for comfortable daily driving and Street/Strip use
- High-temperature paint finish stands up to real-world exhaust heat
Quickview
-
- Three chamber Delta Flow® design with an internal tuning chamber cuts interior resonance for a comfortable, moderate cabin sound
- Delivers the same performance and exterior tone as a two chamber muffler, but with less drone
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fitment with a 3.00″ inlet and 9.75″ body width — ideal for classic muscle car builds
- Trusted 50 Series Delta Flow performance from Flowmaster for your custom exhaust system
Quickview
-
- Full 409 stainless steel construction with a Flow FX straight-through muffler for great sound and maximum performance
- Dual 2.50-inch mandrel-bent tailpipes exit at an angle behind the rear wheels to keep exhaust off your boat or trailer while towing
- Large 4.50-inch black ceramic coated 304S stainless tips with embossed logo for a bold custom look
- Easy at-home install using factory hanger locations, plus an added hanger, instructions, and all hardware
- CARB (California) compliant and purpose-built for 2005-2015 Toyota Tacoma 4.0L trucks
- Moderate sound level delivers an aggressive tone that stays comfortable for daily driving
Quickview
-
- Deep, powerful tone from straight-through Flow FX mufflers while staying at a moderate, street-friendly sound level
- Bolt-on installation using factory hanger locations—no cutting or custom fabrication needed
- Built to last with bright 409S stainless steel mufflers and 3.00-inch mandrel-bent stainless tubing
- Bold dual 4.50-inch black ceramic-coated stainless tips with embossed logo that fill the factory cutouts
- CARB (California) compliant fitment for 2011-2012 Mustang GT 5.0L and 2012 Boss 302
- Includes all necessary parts, hardware, and detailed instructions for a complete upgrade
Quickview
-
- Dual 2.25-inch cat-back system with a Flow FX straight-through muffler for maximum power and improved flow
- Moderate/mild tuning delivers a deep exterior tone while keeping the cabin comfortable
- All stainless steel mandrel-bent tubing and dual 3.00-inch polished 304 stainless steel tips
- Bolts on using all factory hanger locations and clears the spare tire for a clean, easy install
- CARB (California) compliant and includes all necessary parts, hardware, and detailed instructions
- Purpose-built for 2015-2022 Chevy Colorado & GMC Canyon 3.6L V6 (2WD/4WD, 128.3″ & 140.5″ wheelbases)
Quickview
-
- Delta Flow® technology delivers a mellow tone plus improved power and throttle response on 4 and 6 cylinder engines
- Built from 16 gauge aluminized steel and fully MIG welded for maximum durability
- Universal fit with a 2.25″ inlet makes it adaptable to a wide range of builds
- Moderate sound level tunes deeper when paired with a larger diameter tailpipe or tip
- High-temperature paint finish stands up to real-world exhaust heat
Quickview
-
- Adds a deep, moderate performance sound and up to 10 hp / 12 lb.-ft. of torque at the rear wheels
- Built from durable 409S stainless steel for years of corrosion-resistant, trouble-free service
- Bolt-on install using all factory hanger locations, with detailed instructions and hardware included
- Finished with a bold 4.50-inch black ceramic coated 304S stainless tip and embossed logo for a custom look
- CARB compliant fitment for 2019-2026 Silverado/Sierra 1500 5.3L (2WD & 4WD, 148″/157″ wheelbase)
Quickview
-
- Single-chamber design with Flowmaster Delta Flow technology for maximum race performance
- Aggressive sound level that still cuts noise noticeably compared to open headers
- 3.50-inch inlet diameter built for high-flow race applications
- Universal fitment makes it a versatile choice for custom race exhaust builds
- Durable high-temperature paint finish stands up to demanding exhaust heat
- Uses new hangers (not included) and exhaust tips sold separately for a fully custom setup
Quickview
-
- 2.50-inch mandrel-bent 16-gauge stainless steel tubing delivers maximum flow and corrosion resistance
- Tucks up high in the chassis for good clearance and exits straight out the back under the rear bumper
- Direct, specific fit with flat band clamping for a straightforward, secure connection
- Engineered to pair with Side Inlet/Center Outlet mufflers like the Super 44 (842546) or 50 Series (842551)
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
Quickview
-
- All stainless steel construction stands up to salt, moisture, and hard use for lasting durability
- Straight-through 2.50-inch Flow FX muffler delivers a deep, powerful tone with minimal interior drone
- Mandrel-bent tailpipe is tucked high in the undercarriage to protect it on rocky trails
- Large 3.50-inch black ceramic coated tip embossed with the Flowmaster logo adds aggressive style
- Bolts to factory flange and uses factory hangers with all hardware and instructions for easy home install
- CARB compliant and purpose-built for the 2000-2006 Jeep Wrangler TJ 4.0L
Quickview
-
- Delta Flow® technology delivers strong performance flow with low interior resonance and no annoying drone
- Aggressive, deep sound of the Original 40 Series in a larger Super 40 case profile
- Built from 16-gauge aluminized steel and fully MIG welded for maximum durability
- High-temperature paint finish holds up to real exhaust heat
- Universal fitment with a 2.50″ inlet and offset same-side outlet for flexible Street/Strip builds
Quickview
-
- True dual crossmember-back design with a built-in H-pipe crossover for balanced flow
- 16-gauge mandrel-bent stainless steel construction built for durability and smooth flow
- Super 44 Series mufflers deliver a moderate-to-aggressive interior and exterior tone
- Includes all hangers and hardware needed for an easy-fit installation
- CARB compliant and designed for 2WD applications
- Improves throttle response, power, and mileage like all Flowmaster systems
Quickview
-
- Deep, moderately aggressive tone from the Flow FX straight-through muffler without excessive drone
- Durable 409 stainless steel construction throughout for long-term corrosion resistance
- Side-exit dual tailpipes route behind the rear tires to keep exhaust fumes off your boat, trailer, or towed vehicle
- Bolt-on install using factory hanger locations with all hardware and detailed instructions included
- CARB (California) compliant and fits all 2/4WD models and wheelbases of the 2004-2008 F-150 (4.6L/5.4L)
- Aggressive finished look with large 4.50-inch black ceramic coated stainless tips
Quickview
-
- Flowmaster Super 40 Series with Delta Flow® technology delivers aggressive, deep and powerful sound
- Larger case profile balances performance flow with reduced low interior resonance
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish adds extra protection under the vehicle
- Universal fitment with dual 2.50 inlets and dual outlets for flexible exhaust builds
- Ideal aggressive-tone upgrade for late model muscle car exhaust systems
Quickview
-
- Flowmaster Delta Flow technology delivers maximum performance for race applications
- Single chamber race design with a large 4.00-inch inlet for high-flow builds
- Aggressive sound with a noticeable dB reduction over open headers
- Durable high-temperature paint finish stands up to exhaust heat
- Universal fitment lets you integrate it into a custom or cat back exhaust system
Quickview
-
- Dyno-proven gains of +16 hp and +16 lb-ft at the rear wheels for real-world performance
- Durable 409 stainless steel with 3.5-inch mandrel-bent pipes for lasting flow and corrosion resistance
- Flow FX straight-through muffler delivers a moderate sound level without cab drone
- Side-exit design with a 5.00-inch black ceramic embossed tip for a bold, custom look
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Quickview
-
- Deep, performance-tuned sound from the Flow FX straight-through muffler with a moderate sound level
- Durable 409S stainless steel construction built for years of trouble-free service
- Large 3.50-inch black ceramic-coated 304S stainless tip with embossed logo for a custom look
- Bolts to all factory hanger locations with included hardware and instructions for easy at-home install
- Fits 2005–2015 Toyota Tacoma 4.0L in both 2WD and 4WD across all wheelbases
- CARB (California) compliant for emissions-legal peace of mind
Quickview
-
- Durable 409 stainless steel resists corrosion for a long-lasting exhaust build
- Straight 48.00 in. length with 2.50 in. (2-1/2 inch) diameter for smooth, consistent flow
- Sturdy 16-gauge wall stands up to heat and real-world driving
- Perfect building block for fully custom exhaust fabrication
- High Performance grade from Flowmaster, a trusted exhaust brand
- Pairs with Flowmaster mandrel bends (2.00 in. to 3.00 in.) for complete system routing
Quickview
-
- Full 3.00 in. diameter for a high-flow, performance-oriented exhaust build
- Durable 409 Stainless Steel in a heavy 16-gauge wall resists heat and corrosion
- Long 48.00 in. body length gives ample material for custom cutting and routing
- Pairs with Flowmaster mandrel bends (2.00–3.00 in., 45°–180°) for 100% custom exhaust fabrication
- Trusted Flowmaster quality for mid-pipe, over-axle, and tail pipe sections
Quickview
-
- Deep, aggressive-to-moderate Flow FX sound from a proven straight-through muffler design
- Full stainless steel construction with dual 2.50-inch mandrel-bent tailpipes for smooth flow
- Bold 4.50-inch black ceramic coated 304S stainless tips with embossed logo for a custom look
- Bolt-on install using all factory hangers – no cutting or welding, with hardware and instructions included
- CARB compliant and purpose-built for 2019-2024 & 2026 RAM 5.7L Hemi with factory dual exhaust
- Fits all wheelbases, 2WD and 4WD, and every cab and bed configuration
Quickview
-
- Deep, powerful exterior tone with a moderate interior sound, delivered by the dual inlet 50 Series Big Block muffler
- Improves throttle response, power, and mileage as a genuine Flowmaster Cat-back upgrade
- Durable 409 stainless steel tailpipe capped with a polished 304 stainless 4.00-inch Flowmaster-embossed tip
- Right-side rear exit behind the wheel is ideal for towing
- Uses factory hanger locations and includes hardware and a custom aluminum heat shield for an easy install
- CARB (California) compliant fitment for 2001-2006 (2007 Classic) Silverado/Sierra 2500HD/3500HD 6.0L or 8.1L
Quickview
-
- Stainless steel, mandrel-bent construction delivers free-flowing performance and lasting durability
- Flow FX straight-through muffler produces a moderate, deep, powerful exhaust note
- Tailpipe tucks high in the undercarriage for added clearance and protection off-road
- Uses factory hanger locations with all hardware and instructions for easy at-home installation
- 3.00-inch polished stainless tip embossed with the Flowmaster name
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Quickview
Showing 2329–2352 of 20322 results
