Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Flowmaster Flow FX Direct Fit Dual Mode Muffler with Active Valve
$1,018.31
-
Injen IS Short Ram Cold Air Intake System - IS1450 INJ-IS1450
$277.29
-
Vulcan Series 2-1/2 In To 3 In 304 Stainless Steel Cat-Back Exhaust System- AFE-49-36068-P1
$1,464.54
-
BBK MUSTANG V6 OIL SEPARATOR KIT (PASSENGER SIDE)
$169.99
-
Flowmaster Scavenger Series Elite Header
$1,171.06
Image
Product
Price
-
- Mild, mellow sound level from the included 70 Series Big Block II muffler keeps the cabin comfortable while improving flow
- Mandrel-bent 3.00-inch aluminized steel tubing helps deliver improved throttle response, power, and mileage
- Large 3.50-inch polished stainless steel tip gives a subtle custom appearance
- Fits both 2 and 4 wheel drive models and all wheelbases for wide compatibility
- CARB (California) compliant and includes all parts and hardware for an easy, factory-fit installation
- Backed by a 3-year Limited Warranty
-
- Moderate-to-mild Super 50 muffler tuning with a resonance chamber to cut interior drone — great for towing and long hauls
- Mandrel-bent 3.00-inch to dual 2.50-inch 409 stainless steel construction for maximum flow and lasting durability
- Larger 4.00-inch polished stainless tips with embossed logo for a custom dual-outlet look
- Bolt-on install using factory hanger locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Adds real power — max dyno gains of 9 hp and 10 lb-ft at the rear wheels
- Aggressive-to-moderate tone from the tuned Flow FX series muffler
- 3.00-inch to dual 2.50-inch mandrel-bent 409 stainless steel for maximum flow and durability
- Easy bolt-on install using factory-mounting locations with new hangers and hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0-liter engines
-
- Aggressive exterior tone with a moderate interior note thanks to the included 70 Series Big Block II muffler
- Heavy 16-gauge mandrel-bent aluminized steel construction for durability and flow
- Dual 2.50-inch tailpipes with two exit options — straight back or side-exit for towing
- Polished 304 stainless steel tips embossed with the Flowmaster name
- Complete kit with muffler, U-Bolt clamps, hardware and instructions for easy home installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Polished stainless steel with an embossed Flowmaster logo for a clean, branded finish
- Clamp-on installation — no welding needed for a straightforward upgrade
- 2-1/2 inch inlet to 4 inch outlet with a 7.50 in. length for added tailpipe presence
- Round, straight rolled-edge styling that complements any catback exhaust system
- Built to fit 2.50 in. pipe (min/max 2.50) — verify your pipe size before ordering
- High Performance grade and sold individually to match your exhaust configuration
-
- Aggressive exterior tone with a moderate, cabin-friendly interior sound from the 70 Series Big Block II muffler
- Heavy 16-gauge mandrel-bent aluminized steel construction built for durability and flow
- Dual 2.50-inch tailpipes clear the factory spare tire with rear-exit or side-exit options
- Highly polished 3.00-inch 304 stainless steel tips embossed with the Flowmaster name
- Includes all parts, hardware and instructions for an easy at-home install, backed by a 3-year Limited Warranty
- CARB (California) compliant and fits 2WD/4WD extended cab, short bed models
-
- Delivers a moderately aggressive Flowmaster sound inside and outside the cab
- All stainless steel mandrel-bent construction with a Super 40 Series muffler and dual 2.50-inch tailpipes for strong flow and tone
- Large 3.50-inch polished stainless tips add aggressive style at the rear
- DOR/DOS design lets you run dual-out-rear or dual-out-side exits
- Emissions legal and CARB compliant, fitting 2009-2014 F-150 4.6L, 5.0L, and 5.4L trucks
- Easy bolt-on install with all hardware included, backed by a Lifetime Limited Warranty
-
- Aggressive Flow FX series muffler delivers a deep, powerful exhaust tone with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for improved ground clearance and departure angle off-road
- Bolt-on installation uses factory hangers and mounting locations with all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fit for the 2020-2026 Jeep Gladiator JT 3.6L
-
- Deep, aggressive exhaust tone from the Flow FX series muffler with added performance for your 2005-2015 Tacoma 4.0L
- 3.0-inch mandrel-bent 409 stainless steel tubing delivers maximum exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hanger locations with all necessary hardware included for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains up to 12 hp and 13 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel resists corrosion and maximizes exhaust flow
- Over-axle routing adds 2.0 inches of axle clearance for better suspension travel off-road
- Deep, aggressive-to-moderate Flow FX tone with dual 4.00-inch black ceramic-coated tips
- Direct-fit install using factory mounting locations with all hardware and new hangers included
- CARB-compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven max gains of 8 hp and 11 lb-ft of torque at the rear wheels on the 5.7L RAM 1500
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- 3.00-inch mandrel bent 409 stainless steel tubing for maximum exhaust flow and long-term durability
- Aggressive to moderate sound level from the Flow FX series muffler
- Uses factory hangers and mounting locations with all hardware included for easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Flow FX muffler produces a deep, powerful, aggressive exhaust tone
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for improved ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Genuine Flowmaster polished stainless steel exhaust tip with an embossed logo for a premium finished look
- Dual angle rolled edge and round single-wall design add an aggressive, clean appearance to any exhaust system
- Weld-on attachment fits 2.50 inch pipe for a secure, permanent installation
- 3.50 inch outlet, 2-1/2 inch inlet, and 7.50 inch length for a balanced, substantial stance
- High-performance grade stainless steel resists corrosion and holds its shine
- Sold individually so you can outfit single or dual-exit setups exactly as needed
-
- Dyno-proven max gains of 11 hp and 15 lb-ft at the rear wheels for real added performance
- Durable 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and resists corrosion
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Flow FX series muffler delivers an aggressive-to-moderate exhaust tone
- Bolts on using factory hanger locations with all necessary hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds real power — max dyno gains of 15 hp and 20 lb-ft at the rear wheels
- Turndown dump exit ditches the over-axle tailpipe for improved ground clearance and departure angle off-road
- Durable 3.00-inch mandrel-bent 409 stainless steel construction for maximum flow
- Aggressive-to-moderate tone from the Flow FX series muffler
- Bolt-on install using factory hangers with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Signature Flowmaster 40 Series sound — aggressive tone inside and outside the vehicle
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- High-temperature paint finish for lasting protection against heat and the elements
- Universal fitment for Truck/SUV builds and custom exhaust systems
- 2.25″ inlet diameter with a 9.50″ body width in the classic chambered design
-
- Straight-through 3.00-inch perforated stainless core delivers a deep, mellow, moderate performance tone
- Reversible internal flow design installs in either direction to match your application and offsets
- Fully MIG-welded 409 stainless steel construction with Flow FX logo embossed on both sides
- Compact, show-quality case with universal fitment and a dual outlet location
- A distinct alternative to chambered mufflers at an economical price point
-
- Single-chamber Super 10 design delivers the loudest, most aggressive Flowmaster sound available
- Patented Delta Flow® technology maximizes performance
- Built from 16 gauge 409S stainless steel and fully MIG welded for lasting durability
- 3.00″ inlet with universal fitment for flexible custom exhaust builds
- High-temperature paint finish helps withstand demanding heat
- Ideal off-highway upgrade for late model muscle car builds
-
- Purpose-built fitment for 2015-2020 Ford F-150 with 2.7L, 3.3L, 3.5L, and 5.0L engines
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Flow FX muffler delivers a deep, powerful, aggressive/moderate exhaust sound
- Bolt-on install using factory hangers with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the original, aggressive Flowmaster tone inside and out
- 16 gauge 409S stainless steel, fully MIG welded for lasting durability
- 2.50-inch inlet and 9.50-inch body width with universal fitment
- High-temperature paint finish stands up to heat and the elements
- Chambered 40 Series design ideal for classic muscle car builds
-
- Proven Flowmaster HP-2 laminar flow core now in a sleek, compact square case
- 409S stainless steel construction with high-temperature paint for lasting durability
- Aggressive sound with a moderate, refined tone that avoids excessive drone
- 2.00 in. inlet and universal fitment for flexible Truck/SUV exhaust builds
- Backed by Flowmaster’s Lifetime Limited Warranty
- Finish your setup your way — exhaust tips sold separately
-
- Delivers an aggressive-to-moderate exhaust note with increased performance from the Flow FX series muffler
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and resists corrosion
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Application-specific fit for the 2007-2014 Toyota FJ Cruiser 4.0L
-
- Delivers the original, aggressive Flowmaster tone inside and out for a true muscle car sound
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- High-temperature paint finish adds extra heat and corrosion protection
- Universal fitment with a 2.50″ inlet and 9.50″ body width for versatile classic muscle car builds
- Part of the legendary Original 40 Series chambered design that defined the Flowmaster company
-
- True dual 3.00-inch mandrel-bent stainless steel construction delivers maximum flow and lasting durability
- Super 40 Series large-case mufflers produce a deep, aggressive muscular tone inside and out
- H-pipe crossover balances exhaust pressures to add horsepower and torque and reduce deceleration back-rap
- Improves throttle response, power, and mileage — the signature Flowmaster performance advantage
- CARB compliant and includes all necessary parts and hardware for an easy, designed-for-fit installation
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
Showing 481–504 of 1011 results
