Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
Image
Product
Price
-
- Bolt-on axle-back kit clamps to OE tubing for an easy at-home install with all hardware and instructions included
- 60 Series Delta Flow mufflers deliver a moderate deep exterior tone with a mild interior sound
- Fully mandrel-bent 2.50-inch stainless steel tubing for lasting durability and flow
- Highly polished 4.00-inch quad tips in a dual tailpipe layout for aggressive C6 styling
- CARB (California) compliant and backed by Flowmaster’s Limited Lifetime Warranty
- Engineered specifically for 2005-2008 C6 Corvettes (except ZR1) with 6.0L or 6.2L engines
-
- Deep, mild exterior tone with minimal interior drone thanks to the Super 50 Series muffler and internal resonance chamber
- Durable 2.50-inch mandrel-bent stainless steel construction for smooth, consistent exhaust flow
- Bolt-on installation using factory hanger locations, with stock-location exit and all hardware and instructions included
- Finished with a 3.00-inch brushed 304 stainless steel tip at the rear bumper for a clean look
- Emissions legal, CARB compliant, and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fitment for 2007-2018 Jeep Wrangler JK 2-door and 4-door with the 3.8L or 3.6L engine
-
- Aggressive Outlaw-series sound inside and out, purpose-built for the 5.0L Mustang
- 3.00-inch mandrel-bent tubing delivers the maximum power gain possible from an axle-back system
- Bolt-on install using factory hanger locations, factory-style connections, and included hardware and instructions
- Dual 4.00-inch polished stainless steel tips embossed with the Flowmaster name for a premium look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2011-2012 Ford Mustang GT 5.0L and 2012 Boss 302 models
-
- Mandrel-bent stainless steel construction maximizes exhaust flow for improved throttle response, power, and mileage
- 80 Series Crossflow muffler delivers a deep, moderate tone outside with little to no interior resonance in the cab
- Quad 3.00-inch polished 304 stainless steel tips give the rear a finished, aggressive look
- Bolts up with factory-style connections and factory hangers, plus all hardware and instructions for a quick install
- CARB (California) compliant and configured for 2WD applications
- Complete axle-back kit that replaces the factory mufflers behind the rear axle
-
- Adds max gains of 8 hp and 12 lb-ft of torque at the rear wheels over stock
- Full 409 stainless steel construction with mandrel-bent 3.00 to dual 2.50-inch piping for improved flow
- Dual 3.50-inch black stainless tips with embossed logo for a custom, aggressive look
- Bolts to factory hanger locations with all hardware and instructions included for an easy at-home install
- Aggressive yet moderate Flow FX tone — assertive without excessive drone
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back exhaust system built specifically for the 22-26 Toyota Tundra 3.4L
- 409 stainless steel with 3.0-inch mandrel-bent pipes for improved flow and durability
- Straight-through Flow FX muffler delivers an aggressive-to-moderate sound inside and out
- Under-truck dump-style turn-down tip adds style and better off-road ground clearance
- Bolts on using factory hangers with all hardware and instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 20 hp and 25 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel with 3.00-inch mandrel-bent tubing for better exhaust flow
- Aggressive-to-moderate European note with Helmholtz resonators to reduce interior drone
- Dual 3.50-inch black stainless tips with embossed logo for a custom look
- Bolts to factory hangers with all hardware and instructions included for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive-yet-moderate American Thunder tone that’s heard inside and out without overwhelming drone
- Includes the Super 50 Series muffler plus all necessary parts and hardware for an easy bolt-on install
- 2.50-inch free-flowing design improves throttle response, power, and mileage
- Single side exit, single tail pipe layout delivers a subtle custom appearance
- CARB (California) compliant with Emission Code 5 for legal, worry-free operation
- Built for 4WD applications with a clean silver pipe finish
-
- All stainless steel 3.00-inch mandrel-bent tubing and a Super 50 Series muffler improve throttle response, power, and mileage
- Mild interior and exterior tone makes it ideal for towing and daily driving without excessive noise
- Bolt-on fit uses factory hanger locations and includes all parts and hardware for easy installation
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom appearance
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back kit with stainless steel mandrel-bent 2.5-inch inlet pipe, Super 50 Series muffler, and dual tailpipes for freer-flowing exhaust
- Delivers a moderate, refined sound level that appeals to most enthusiast owners without excessive drone
- Finished with large 3.00-inch polished 304 stainless steel tips for a durable, high-quality look
- Fits 1998-2011 Ford Ranger and 1998-2009 Mazda B3000/B4000 extended cab trucks with 3.0L or 4.0L engines, both 2WD and 4WD
- CARB (California) compliant and backed by Flowmaster’s Limited Lifetime Warranty
- Includes all necessary parts, hardware, and installation instructions for a complete install
-
- Adds improved horsepower and torque to the 5.6L Nissan Titan with a proven American Thunder cat-back design
- Delivers an aggressive yet moderate exhaust note that sounds great inside and outside the truck
- Built from durable 409S stainless steel with a mandrel-bent 3.00-inch tailpipe and 70 Series Big Block muffler
- Finished with a large 3.50-inch polished stainless steel Flowmaster tip exiting in the stock passenger-side location
- CARB (California) compliant and includes instructions plus all hardware for an easy bolt-on install
-
- Polished stainless steel construction resists corrosion and keeps a bright, lasting shine
- Slips over 3.00 in. pipe with a bold 4.00 in. outlet for a more aggressive exhaust look
- Angled, rolled edge and round shape deliver a clean, premium finished appearance
- Embossed Flowmaster logo confirms authentic brand styling
- Weld-on mounting provides a permanent, rattle-free custom installation
- High Performance grade tip measuring 5.25 in. long with a 4.00 in. diameter
-
- Delivers a moderate/mild exhaust note with Super 50 series mufflers and tuned resonators for great sound without cabin drone
- Mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Scavenger X-pipe helps increase torque and control interior sound
- Dual 4.00-inch polished stainless steel tips with embossed logo for a custom look
- Easy bolt-on install using factory hanger locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains up to 6 hp and 5 lbs-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with dual 2.50-inch mandrel bent pipes for improved flow
- Flow FX straight-through muffler delivers an aggressive to moderate sound level
- Dual 3.50-inch black ceramic tips with embossed logo for a custom, aggressive look
- Uses factory hanger locations with included hardware and instructions for easy at-home install
- CARB compliant in all 50 states and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete Flow FX cat-back exhaust system built specifically for the 2022-2026 Toyota Tundra 3.4L
- Durable 409 stainless steel with dual 2.50-inch mandrel-bent pipes for improved flow
- Straight-through Flow FX muffler delivers an aggressive to moderate sound and maximum performance
- Dual 4.00-inch black ceramic tips with embossed logo for a custom, finished look
- Mounts on factory hangers and includes all hardware and instructions for easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderate exterior tone with only a mild sound increase inside the cab – perfect for drivers who want more sound without the drone
- All stainless steel construction with a Super 50 Series muffler and dual 2.50-inch mandrel-bent tailpipes for lasting durability and smooth flow
- Side-exit design behind the rear tires keeps the exhaust clear for towing
- Finished with a pair of 3.00-inch polished 304 stainless steel tips for a clean, premium look
- Fits 2009-2014 Chevrolet Tahoe / GMC Yukon 5.3L in both 2WD and 4WD, and is CARB compliant
- Includes all necessary parts and hardware for easy at-home installation, backed by a Lifetime Limited Warranty
-
- Complete stainless steel cat-back system with large dual 3.00-inch mandrel-bent tubing for maximum flow over restrictive factory piping
- Exclusive Scavenger X-pipe crossover plus race-proven Outlaw mufflers deliver maximum power and an aggressive, deep tone
- Finished with large 4.00-inch polished stainless steel dual tips for a bold performance look
- Emission legal and CARB (California) compliant, so you can add sound and flow while staying compliant
- Easy bolt-on install using factory hanger locations with all necessary parts and hardware included
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Delivers Flowmaster’s signature moderate-to-aggressive tone that lets your performance be heard
- Complete cat-back kit includes the 50 Series HD muffler plus all necessary parts and hardware for easy installation
- Improves throttle response, power, and mileage over a restrictive stock exhaust
- Single side-exit design with black muffler and silver piping for a subtle custom appearance
- CARB (California) compliant with a 3.00-inch inlet for efficient flow
-
- Gains up to 5 hp and 5 lb-ft of torque at the rear wheels over stock
- 409 stainless steel with 2.50 and 3.00-inch mandrel-bent tubing for maximum flow and durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Deep, powerful Flow FX muffler tone with an aggressive-to-moderate sound level
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Durable 409 stainless steel construction with 2.50-inch mandrel-bent pipes for improved exhaust gas flow
- Flow FX muffler delivers a moderate, mild tone tuned for maximum performance without cabin drone
- Dual 3.00-inch black ceramic-coated tips with embossed logo for a bold, custom look
- Bolts to existing factory hanger locations with included hardware and instructions for easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fitment for 2021-2025 Ford Bronco Sport 1.5L and 2.0L engines
-
- Bolt-on power: gains up to 6 hp and 5 lb.-ft. of torque at the rear wheels over stock
- Built from durable 409 stainless steel with 2.50 and 3.00-inch mandrel-bent pipes for better flow
- Flow FX straight-through muffler delivers an aggressive-to-moderate tone without highway drone
- Finishes with a 4.00-inch black ceramic tip featuring the embossed Flowmaster logo
- Uses factory hanger locations and includes hardware plus instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Race-inspired American Thunder Extreme design delivers a super aggressive interior and exterior tone via Super 44 Series mufflers
- Mandrel-bent piping maximizes flow for improved throttle response and power over the restrictive factory exhaust
- Turn-down dual tailpipes add clearance for wide tires and modified suspensions while boosting sound level
- Complete cat-back kit includes all necessary parts and hardware for an easy, bolt-on installation
- CARB (California) compliant with a 2.50″ inlet, built for 2WD coupes and convertibles
-
- Full 409 stainless steel construction for lasting durability and corrosion resistance
- 50 Series HD muffler with large 4.00-inch internals and a built-in resonator to keep interior sound to a minimum
- Deep, moderate-aggressive exhaust tone that stands out outside the vehicle
- Direct-fit design attaches to factory hanger locations for a quick, at-home installation
- Fits 2009-2024* (*Classic body) RAM 1500 trucks with the 5.7L Hemi and factory dual tailpipes
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Straight-through 3.0-inch stainless steel perforated core delivers smooth flow and a deep, mellow tone
- Fully MIG-welded “bright” 409 stainless steel with embossed Flow FX logos for show-quality durability
- Universal 3.00-inch inlet and outlet fits Chevrolet, Dodge, Ford, GMC and many custom exhaust systems
- Reversible internal flow design installs in either direction to suit your vehicle
- Compact 6-inch diameter body and 20.00-inch length ideal for large displacement gas engines
- Moderate performance tone that stands apart from traditional chambered mufflers
Showing 721–744 of 1011 results
