Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Performance Air Intake System- 302-283
$349.99
-
Mishimoto Nissan 240SX Aluminum Fan Shroud Kit (1989-1994)
$255.95
-
Edge Products Pulsar LT Control Module - EDG-22457
$422.96
-
Mishimoto Aluminum Locking Lug Nuts M12x1.25 - Neochrome Finish
$130.95
-
10-17 Audi A5 Quattro (2.0) Exhaust System Kit
$2,072.97
Image
Product
Price
-
- Moderate exterior tone from the Super 50 Series muffler with minimal in-cab sound increase
- All stainless steel construction with dual 2.50-inch mandrel-bent tailpipes and a 3.00-inch inlet
- Configurable rear-exit or side-exit routing to suit daily driving or towing
- Finished with large 3.50-inch polished stainless steel tips for a bold rear look
- CARB (California) compliant and includes all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive Outlaw-series axle-back tone with dyno-proven gains of up to 17 hp and 17 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and durability
- Quad 4.00-inch black ceramic coated tips with embossed logo for a custom, aggressive look
- Bolt-on install using factory hangers and mounting locations — all hardware included, reuse OEM valve actuator
- Fits 2024-2026 Mustang GT 5.0L and EcoBoost 2.3L (factory performance exhaust option), coupe or convertible
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Frees up flow over the restrictive factory transverse muffler for maximum performance
- Super HP-2 muffler delivers a moderate-to-aggressive exhaust note
- High-tucked 3.00-inch polished stainless tip improves off-road ground clearance
- Fits 2007-2018 Jeep Wrangler JK 2-door and 4-door with 3.8L or 3.6L engines
- CARB (California) compliant and includes all hardware for easy at-home installation
- Mandrel-bent 2.50-inch stainless steel tailpipe with dual pipe design
-
- Dyno-proven gains of up to 17 hp and 17 lb-ft at the rear wheels
- Aggressive Outlaw-series mufflers deliver a bold, race-inspired exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing plus quad 4.00-inch polished tips
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB compliant and street-legal, backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2024-2026 Mustang 5.0L GT and 2.3L EcoBoost coupes and convertibles
-
- Complete bolt-on cat-back kit with all necessary parts and hardware for an easy at-home install
- Super 50 Series muffler delivers a moderate/mild tone with Flowmaster performance
- Mandrel-bent stainless steel inlet and 3.00-inch tailpipe finished with a large 4.00-inch polished tip
- CARB (California) compliant and emissions-legal for street use
- Fits 2014-2019 Silverado/Sierra 1500 Classic body 4.3L/5.3L Double Cab and Crew Cab models
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Bolt-in Flowmaster Y-Pipe for 2024-2026 Mustang 2.3L EcoBoost — fits coupes and convertibles using factory hangers
- Mandrel-bent 3.00-inch 409 stainless steel tubing with a Scavenger Series Y-collector for durable, free-flowing performance
- Scavenger D-port technology boosts exhaust pulse velocity to increase sound and performance over the restrictive factory piece
- Dual 2.50-inch outlets work with your factory rear mufflers or a Flowmaster Axle-back system
- Includes all parts, hardware, and instructions, and is backed by the Flowmaster Lifetime Limited Warranty
-
- Dyno-proven gains of up to 14 hp and 15 lb-ft at the rear wheels on the 2.7L turbo
- Aggressive-to-moderate tone from the Flow FX straight-through muffler
- Durable 409 stainless steel with mandrel-bent 3.00-inch to dual 2.5-inch pipes
- Easy at-home install using factory hanger locations with all hardware and instructions included
- Dual 4.00-inch black ceramic coated tips with laser tip logo for standout side-exit style
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior tone with a moderate interior sound, thanks to the 50 Series HD muffler and built-in tuned resonance chamber that fights drone
- True bolt-on install using factory hanger locations, with all parts and hardware included for an at-home job
- Choose your exit style — dual side-exit behind the rear tires for towing, or straight-out under the bumper for a muscular look
- Polished stainless steel 3.50-inch tips with embossed logo and mandrel-bent piping for clean flow and appearance
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for 2011-2018 Silverado and Sierra 1500 6.2L trucks in 2WD and 4WD
-
- Super aggressive interior and exterior tone from Flowmaster’s race-oriented Outlaw Extreme series
- Turn-down tailpipes maximize sound and add clearance for wide tires and modified suspensions
- Mandrel-bent construction improves throttle response and power
- Fits 1986-2004 Mustang GT, LX & Cobra with 4.6L or 5.0L engines
- Uses factory hangers and includes all hardware for an easy installation
- CARB (California) compliant with the Outlaw muffler included
-
- Fully polished stainless steel construction with an embossed Flowmaster logo for authentic, corrosion-resistant style
- Easy clamp-on installation — no welding required to fit 3.00 inch tailpipes
- Bold rectangular profile with a 3 inch inlet and 3.00 x 7.00 outlet for a finished, aggressive look
- High Performance grade tip with an angled rolled edge and single-wall construction
- Sold individually so you can match tip count to your exhaust setup
- Backed by the trusted Flowmaster name to complete any cat back exhaust system
-
- Delivers a deep, aggressive sound inside and outside the cab thanks to the Super 10 Series muffler
- 3.00-inch mandrel-bent stainless steel tubing promotes smooth, unrestricted exhaust flow
- Configurable rear or side exit tailpipes — side exit is ideal when towing a boat or RV
- Large 4.00-inch black ceramic-coated dual-wall stainless tips with embossed logo
- CARB compliant, emissions-legal bolt-on with all hardware included and a Lifetime Limited Warranty
- Engineered for 2009-2013 GM Silverado/Sierra 1500 5.3L trucks with 143.5 and 157.5-inch wheelbases
-
- Dyno-proven gains up to 13 hp and 15 lb-ft at the rear wheels
- Durable 409 stainless steel with 3.00-inch to dual 2.50-inch mandrel-bent pipes for better flow
- 50 Series Big Block muffler delivers an aggressive-to-moderate tone
- Bolt-on install using factory hangers, with hardware and instructions included
- Dual 3.5-inch polished stainless tips with rear or side exit options
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Super 10 Series muffler with 3.00-inch mandrel-bent stainless tailpipes delivers Flowmaster’s most aggressive sound inside and out
- Two tailpipe exit options—straight out the back or behind the rear wheels for towing—let you set it up your way
- Dual 4.00-inch black ceramic coated stainless steel tips with embossed logo for a bold, finished look
- Emissions-legal and CARB compliant, so you get the volume and flow without compliance worries
- Complete bolt-on kit with all parts and flanged hardware, backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2009-2024 RAM 1500 (Classic body) 2WD with 4.7L or 5.7L Hemi across multiple cab and bed configurations
-
- Dyno-proven gains of 18 hp and 14 ft/lbs at the rear wheels for real performance you can feel
- Direct-fit design connects to the factory dual tail pipes and reuses all factory hangers for an easy at-home install
- 409 stainless steel construction with 3.00-inch mandrel-bent pipes for durability and optimum flow
- Flow FX Series muffler delivers an aggressive-to-moderate exhaust tone with dual outlets
- Includes clamps, hangers, hardware, and installation instructions, backed by Flowmaster’s 1-Year Limited Warranty
-
- Delivers a very deep, aggressive Flowmaster sound inside and outside your RAM 1500
- Direct-fit, bolt-on design uses factory hanger locations for a quick at-home install
- Built from durable 409 stainless steel for long-term corrosion resistance
- 3.00-inch mandrel-bent inlet and dual 2.50-inch outlets that connect to factory dual tailpipes
- Engineered specifically for 2009-2024* (Classic body) RAM 1500 with the 5.7L Hemi
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound under hard acceleration with a moderate, livable tone while cruising
- Dual 3.00-inch mandrel-bent stainless tubing and a Scavenger Series X-pipe for maximum flow and power
- Includes a pair of race-proven Outlaw Series mufflers and quad polished 304 stainless embossed tips
- Bolts in at factory hanger locations with all hardware included for an easy at-home install
- CARB compliant and street legal in all 50 states, backed by Flowmaster’s Lifetime Limited Warranty
- Direct fitment for the 2009-2014 Dodge Challenger R/T 5.7L Hemi
-
- Deep, aggressive Hemi sound from a pair of Super 44 Series mufflers with a livable moderate-to-aggressive character
- Dual 2.50-inch Scavenger Series X-Pipe and mandrel-bent tubing for maximum flow and a deep performance tone
- Durable 409S stainless steel construction with 2.50-inch stainless tips that exit through the factory rear valance bezels
- True bolt-on kit with flanged connections and all necessary parts and hardware included for an easy fit
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2015-2016 Charger R/T and 2015-2023 Chrysler 300 with the 5.7L Hemi
-
- Super 10 Series muffler delivers the most aggressive Flowmaster sound, both inside and outside the truck
- Full stainless steel, mandrel-bent construction with dual 3.00-inch tailpipes for maximum flow and performance
- Large 4.00-inch black ceramic coated double wall stainless tips with embossed logo for a bold, finished look
- Emissions legal and CARB compliant, so you stay street-legal without giving up sound
- True bolt-on kit includes the muffler and all necessary hardware for easy at-home installation
- DOR/DOS design fits 2WD and 4WD F-150s with 4.6L, 5.0L, or 5.4L engines and all wheelbases
-
- Direct-fit cat-back exhaust for the 2021-2026 Ford F-150 3.5L PowerBoost using all factory hanger locations
- Mandrel-bent 409 stainless steel tubing improves exhaust gas flow for maximum performance
- Specially tuned resonator and included muffler deliver a deep, moderate to mild sound
- 5.00-inch black ceramic coated stainless steel tip adds aggressive style
- Includes instructions and all hardware for an easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, muscular tone with mild-to-moderate volume that stays comfortable inside the cabin
- Full mandrel-bent 2.50-inch stainless steel tubing with Scavenger Series X-pipe and dual 60 Series mufflers for real performance gains
- Large 4.00-inch polished 304S stainless steel logo tips exit in factory locations for a clean OE-style look
- CARB compliant and emissions-legal on the 5.7L Hemi, fitting both 2WD and 4WD Durango models
- Bolt-on install with all necessary parts and hardware included, backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back exhaust system engineered for 1996-1999 GM 1500 trucks with the 5.7L engine
- Durable 409 stainless steel, mandrel-bent 16-gauge tubing improves exhaust gas flow
- Super 10 Series muffler delivers an aggressive-to-moderate performance sound
- Dual 4.5-inch black ceramic coated tips can exit dual rear or dual side
- Uses all factory hanger locations with included hardware and instructions for an easy home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete crossmember-back kit for 1968-1969 Chevrolet Corvette (2WD) with everything needed for a trouble-free install
- Dual 2.50-inch mandrel-bent stainless tubing and Scavenger X-pipe deliver maximum power and a deep, unique tone
- 50 Series Delta Flow mufflers provide a moderate exterior and mild interior sound level
- Highly polished 304 stainless steel tips exit cleanly through the factory cutout bezels
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
- Ideal for Big Block applications and high-performance small block engines
-
- Aggressive Flowmaster tone heard inside and outside the cab, powered by a stainless steel 50 Series HD muffler
- Mandrel-bent piping with 3.00″ inlet and dual 2.50″ stainless tailpipes to reduce restriction and maximize performance
- Polished 3.50″ stainless steel tips with embossed logo for a clean, finished look
- True bolt-on DOR/DOS dual-out design that includes the muffler and all installation hardware
- Emissions-legal and CARB (California) compliant, backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fit for 2014-2018 Ram 2500 5.7L V8 Crew Cab Long/Standard Bed models
-
- Delivers a mild-to-moderate exhaust note from the Super 50 Series muffler—performance without the drone
- All stainless steel mandrel-bent tubing and a 3.00-inch tailpipe for maximum flow and lasting durability
- CARB compliant and emissions-legal, so it’s street-legal even in states with strict standards
- Complete bolt-on kit with flanged connections plus all parts and hardware for an easy install
- Polished 5.5″ x 3.5″ oval stainless tip with embossed Flowmaster logo for a clean finished look
- Backed by a Lifetime Limited Warranty for long-term peace of mind
Showing 769–792 of 1011 results
