Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Dinan High Performance Air-to-Water Intercoolers - 2009-2013 BMW 5/6/7-Series
$2,999.95
-
Injen PF Cold Air Intake System w/ Rotomolded Air Filter Housing - PF5003 INJ-PF5003
$478.36
-
Catalytic Converter-Universal-225 Series-2.25 in. Inlet/Outlet-49 State
$166.97
-
AEM-28-20888 DryFlow Air Filter
$59.99
-
JLT CAI-75-5148 Cold Air Intake with Snap-In Lid For 2015-2022 Ford Mustang GT350 5.2L Cotton Cleanable Red
$349.00
Image
Product
Price
-
- Delivers a deep, aggressive exterior tone with a mellow growl inside the cab
- All stainless steel construction with a Super 40 Series muffler and 2.50-inch mandrel-bent dual tailpipes
- Includes two sets of final pipes so you can run dual-out-the-back or dual-behind-the-rear-tires for towing
- Finished with 3.50-inch double-wall polished stainless steel tips for a clean look
- CARB compliant and emissions-legal with all hardware included for easy at-home bolt-on installation
- Fits 2009-2021 Toyota Tundra 4.6L, 4.7L, and 5.7L trucks in 2WD and 4WD
-
- Made from 304 stainless steel with double-wall construction for durability and lasting good looks
- Bold Black Ceramic Coating finish with an embossed Flowmaster logo for aggressive, authentic style
- Easy clamp-on, slip-fit installation over 2.50″ tubing — no welding needed
- 2-1/2 inch inlet steps up to a wide 4-inch round, angle-cut outlet
- Universal mounting orientation fits a wide range of vehicles running 2.50″ pipe
- Sold individually, so you can order the exact quantity for single or dual-exit setups
-
- Cat-back system built from brushed 304 stainless steel and fully TIG welded for strength and a clean, lasting finish
- Max dyno gains of 20 hp and 22 lb-ft at the rear wheels from 3.00-inch mandrel-bent tubing
- Straight-through Signature Series muffler delivers a deep, powerful sound outside with a moderate tone inside the cab
- Bolts to the factory flange and uses factory hanger locations for an easy, no-cut installation
- Finished with a 4.50-inch PVD-coated black chrome tip embossed with the Flowmaster name
- CARB (California) compliant and includes all parts, hardware, and detailed instructions
-
- Delivers maximum, aggressive sound inside and outside the truck via the dual inlet Super 10 Series muffler
- Full stainless steel construction with 3.00-inch dual tailpipes for maximum flow and performance
- Two sets of tailpipe exits let you run dual out the back or dual behind the rear tires for towing
- Finished with 4.00-inch black ceramic coated, double wall stainless tips with embossed logo
- Emissions-legal and CARB compliant with all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Race-proven 3.00-inch stainless steel Outlaw muffler delivers the ultimate aggressive sound and tone
- Complete cat-back kit includes the muffler and all necessary parts and hardware for an easy at-home install
- Bolts up using the factory hangers — no cutting or custom fabrication required
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2009-2013 Silverado 1500 & Sierra 1500 5.3L Extended and Crew Cab models
- 3.00-inch dump style turn-down exit with no tailpipes for a loud, unmistakable exhaust note
-
- Aggressive, streetable tone from stainless steel Super 44 Series mufflers
- Dual 2.50″ 409S stainless tailpipes with a welded H-Pipe for balanced flow and sound
- Mandrel-bent pipes reduce restriction to maximize performance
- Direct bolt-on fit for 1962-1967 Chevy II/Nova (2WD) with all parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, moderately aggressive Super 40 Series sound tuned for enjoyable street and towing use
- Configure the dual tailpipes for rear under-bumper exit or side exit behind the tires — ideal for towing a boat or RV
- Mandrel-bent stainless steel tubing and tailpipes finished with 3.50-inch double wall polished stainless tips
- Bolt-on, flanged design includes all necessary parts and hardware for an easy installation
- Emissions-legal and CARB (California) compliant
- Protected by Flowmaster’s Lifetime Limited Warranty
-
- Stainless steel 50 Series HD muffler with 4.00-inch internals delivers moderately aggressive interior and aggressive exterior sound
- Dual 3.00-inch mandrel-bent stainless tailpipes reduce restriction and maximize performance
- Choose side exits behind the rear wheels for towing or straight-out-the-back exits under the bumper
- Emissions-legal and CARB (California) compliant, so it’s street-legal in all 50 states
- Complete bolt-on kit with hardware, polished 4.00-inch tips, and easy-to-follow instructions
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a very aggressive exhaust tone inside and outside your Camaro SS, powered by dual stainless steel Outlaw Series mufflers
- Improves throttle response, power, and mileage thanks to 2.50″ mandrel bent stainless steel pipes
- Finished with polished 4.00″ stainless steel dual tips for a bold, purposeful look
- Emissions-legal and CARB (California) compliant for street use
- Easy bolt-on axle-back design includes all necessary parts and hardware for installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Cat-back exhaust made from full brushed 304 stainless steel and TIG welded for durability and a clean finish
- Signature Series straight-through muffler delivers an aggressive-to-moderate deep performance tone
- Dyno-proven gains of 13 hp and 13 lb-ft at the rear wheels on the 5.7L Hemi
- 4.50-inch PVD-coated black chrome 304S stainless tips exit the factory bumper cutouts for a custom look
- Uses all factory hanger locations with included hardware and instructions for an easy at-home install
- CARB (California) compliant and fits all cab, bed, wheelbase, 2WD and 4WD configurations
-
- Direct bolt-on fit for 2018-2026 Jeep Wrangler JL 2-door and 4-door with the 3.6L engine, using factory hangers
- Aggressive exterior tone with a mild interior note thanks to the 80 Series crossflow muffler and dedicated reflection resonator
- Full stainless construction with 2.50-inch mandrel bent inlet and dual tailpipes for smooth, unrestricted flow
- Stealthy dual 4.00-inch black ceramic coated tips with embossed Flowmaster logo
- CARB (California) compliant, emissions-legal system that includes the muffler and all necessary hardware for easy at-home installation
-
- Delivers an aggressive interior and exterior sound thanks to the included Super 10 Series muffler
- Emissions-legal and CARB (California) compliant, so you get bold performance without legal worries
- Bolt-on fit that uses factory hanger locations and includes all parts and hardware for easy installation
- Your choice of dual rear (under bumper) or dual side (behind rear tires) exit to suit your truck
- Stainless steel mandrel bent tubing and dual 3.00-inch tailpipes for smooth, free-flowing performance
- Finished with large 4.00-inch black ceramic coated tips and backed by a Lifetime Limited Warranty
-
- Fully polished stainless steel with double-wall construction for lasting durability and a premium finish
- Clamp-on installation with universal mounting fits 3-inch pipe — no welding required
- 3-inch inlet to 4-inch round, angle-cut outlet for an aggressive, finished look
- Embossed Flowmaster logo delivers authentic brand styling
- Sold individually so you can order one tip or a matched pair for dual exhaust setups
-
- Cat-back exhaust system built from premium brushed 304 stainless steel and TIG welded for lasting strength
- Signature Series straight-through muffler delivers an aggressive yet moderate Flowmaster tone
- Max dyno gains of 5 hp and 5 lb-ft at the rear wheels for real performance improvement
- Dual angled tailpipes with 4.50-inch PVD black chrome tips direct exhaust away when towing and add custom style
- Uses factory hanger locations plus an included extra hanger, with all hardware and instructions for an easy at-home install
- CARB (California) compliant and fits all 2016-2023 Tacoma 3.5L trucks, 2WD/4WD and every wheelbase
-
- Delivers a moderately aggressive exterior sound with a moderate, comfortable interior tone
- Full stainless steel construction with 2.50-inch mandrel-bent tubing and a Super 50 Series muffler for smooth, freer flow
- Dual 3.50-inch polished stainless tips exit behind the rear tires — great for towing and a bold rear look
- Uses factory hanger locations and includes all hardware and instructions for an easy at-home install
- CARB (California) compliant and fits all 2016-2023 Tacoma Access/Double Cab 3.5L 2WD and 4WD wheelbases
-
- Moderate exterior tone with a mild interior sound—performance without cabin drone
- Stainless steel 80 Series Crossflow muffler and dual 2.50-inch mandrel-bent tailpipes included
- Polished stainless 3.50-inch tips with embossed logo for a clean, upgraded look
- Bolt-on installation using factory hanger locations—easy to do at home with included hardware and instructions
- CARB compliant and emissions-legal, purpose-built for 2012-2018 Jeep Wrangler JK/JKU 3.6L
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate interior tone for comfortable daily driving
- Durable 409S stainless steel construction with a Super 40 Series muffler included
- 3.00-inch mandrel-bent inlet and dual 2.50-inch tailpipes finished with polished 3.50-inch stainless tips
- Choose rear-exit under the bumper or side-exit behind the rear tires to suit towing needs
- Bolt-on fit for 2015-2020 F-150 with 2.7L/3.3L/3.5L EcoBoost, 3.5L TiVCT and 5.0L engines, plus all hardware
- CARB (California) compliant with included parts for an easy at-home installation
-
- Mild exterior sound with a moderate interior tone — deeper character without cabin drone
- Durable 409S stainless steel with 3.00-inch mandrel-bent tubing for smooth, high-flow performance
- Included 70 Series performance muffler and a large 4.00-inch double-walled polished stainless tip with embossed logo
- Easy bolt-on install with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2015-2020 Ford F150 2.7L, 3.3L, 3.5L Ecoboost, 3.5L TiVCT and 5.0L engines across most cab/bed configurations
-
- Aggressive exterior sound with a moderate interior tone for a Mustang GT that’s bold but livable
- Exclusive dual 3.00-inch mandrel-bent Scavenger Series X-pipe maximizes power and creates a deep, unique tone
- 60 Series performance mufflers with dual mandrel-bent tailpipes and large 4.00-inch polished stainless steel tips
- CARB (California) compliant and emissions-legal for peace of mind
- Uses factory hanger locations and includes all parts and hardware for an easy at-home installation
- Built specifically for 2015-2017 Mustang GT 5.0L coupes (does not fit Convertibles)
-
- Adds max dyno gains of 13 hp and 16 lb-ft at the rear wheels on your F-150
- TIG welded 304 stainless steel muffler delivers an aggressive to moderate sound level
- 3.00-inch mandrel bent brushed 304 stainless steel tubing maximizes flow and durability
- 4.50-inch PVD coated black chrome tip for a bold, custom appearance
- Bolt-on install using factory-mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate interior tone — the best of both worlds for daily driving and open-road fun
- Durable 409S stainless steel with mandrel-bent dual 3.00-inch tubing and a Scavenger Series X-pipe for maximum power
- Quad 3.50-inch polished 304 stainless tips with embossed logo exit within the rear bumper valence for a factory-integrated look
- Dummy valve stands keep factory actuators happy for wide-open sound and performance without throwing a code
- Bolt-on install using factory hanger locations, backed by Flowmaster’s Lifetime Limited Warranty
- CARB (California) compliant fitment for 2015-2023 Challenger Hellcat/Demon, SRT392/Scat Pack, and 2017-2023 R/T
-
- Dyno-verified gains of up to 17 hp and 18 lb-ft at the rear wheels for real added performance
- TIG welded 304 stainless steel muffler and 3.00-inch mandrel bent tubing for maximum flow and lasting durability
- Dual 4.00-inch PVD coated black chrome tips deliver a custom, aggressive look for your Bronco
- Deep, aggressive-to-moderate exhaust tone from Flowmaster’s Signature Series design
- Easy bolt-on install using factory mounting locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate interior tone thanks to the 50 Series HD muffler
- Mandrel-bent 3.50-inch stainless inlet and dual 2.50-inch stainless tailpipes for high flow
- Quad 4.00-inch black ceramic coated stainless tips exit through the factory bezel locations for standout style
- Bolt-on design uses factory hangers with all parts, hardware, and instructions for easy at-home install
- CARB compliant and emissions-legal for the 2019-2023 6.2L Silverado/Sierra 1500 with factory dual exhaust
-
- Dyno-proven gains up to 18 hp and 14 lb-ft at the rear wheels
- Aggressive-to-moderate Super 40 Series muffler tone that won’t drone
- Durable 409 stainless steel, mandrel-bent tubing for better flow
- Bolts to factory hanger locations with included hardware and instructions for easy at-home install
- Dual 4.5-inch black ceramic coated tips with embossed logo for added style
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 793–816 of 1011 results
