Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Flowmaster 4" Stainless Steel Band Clamp - Pair
$22.64
-
BBK 2004-2006 FORD F SERIES/EXPEDITION 4.6L 75MM THROTTLE BODY
$369.99 $409.99 -
Volant Closed Box Air Intake (15974) 1996-2000 Chevrolet C2500, C/K 3500, 1996-99 Chevrolet K2500, 1996-98 Gmc C2500 7.4L V8-15974
$385.99 $386.00 -
Injen SP Cold Air Intake System - SP1969 INJ-SP1969
$430.98
-
Mishimoto Ignition Coil MMIG-F150-01 for Ford F-150 V8
$26.95
Image
Product
Price
-
- Replaces restrictive cast iron manifolds to boost throttle response, power and engine efficiency on GM Big Block engines
- Stainless steel construction with silver ceramic coating for durability and heat management
- 2 in. primary tubes and a 3.50 in. ball flange collector for strong, leak-free performance
- 3/8 in. thick flanges and 16-gauge tubing built to High Performance grade standards
- Includes gaskets, reducers, collectors and hardware for an easy, complete installation
-
- Long tube, equal length design with 1-3/4 inch primary tubes for balanced scavenging and improved throttle response, power, and engine efficiency
- Stainless steel construction with a silver ceramic coating for maximum heat and corrosion durability
- 3/8 inch thick flanges and 3.00 inch ball flange collector connections ensure a rigid, leak-free installation
- Complete package includes collector, reducers, gaskets, and mounting hardware for an easier install
- Purpose-built to replace restrictive factory cast iron manifolds on Ford Small Block engines
-
- Replaces restrictive factory manifolds for improved throttle response, power, and engine efficiency on GEN 3 HEMI engines
- Stainless steel construction with a durable Silver Ceramic coating for heat and corrosion resistance
- 1-3/4 inch unequal-length primary tubes and 16-gauge tube walls for performance airflow and long-term strength
- 3/8 inch laser-cut flanges with a 2.50-inch factory collector connection for a direct-fit, leak-free install
- Includes gaskets, collector, and necessary M8 hardware to simplify installation
- 50-state legal for 2009-2016 models under CARB E.O. #D-698-19 and EPA Memo 1A compliant for 2017-2022 applications
-
- 2.50-inch mandrel-bent 16-gauge stainless steel tubing delivers maximum flow through smooth bends
- Dual configuration with long, polished 304 stainless steel tips for a bright, aggressive rear exit
- Pre-bent to tuck high in the chassis for good clearance and a straight-out exit under the rear bumper
- Engineered to pair with Side Inlet / Opposite Side Outlet mufflers like the Super 44 (842548) or 50 Series (842553)
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Built from 2.50-inch mandrel-bent 16-gauge stainless steel for maximum flow and long-lasting durability
- Direct-fit, specific-fit design tucks up high for good clearance and exits straight-out under the rear bumper
- Engineered to pair with Side Inlet/Opposite Side Outlet mufflers like the Super 44 (842548) and Super 50 (852558)
- Backed by Flowmaster’s Lifetime Limited Warranty
- High-performance grade construction with a natural stainless finish and flat band clamping
-
- Custom pre-bent to match Flowmaster system part# 817413 for a precise, headers-back fit
- 16 gauge mandrel-bent 2.50-inch stainless steel tubing for smooth flow and lasting durability
- Dual exit design that tucks up high above the rear axle for a clean look and clearance
- Specific fit for 1959-1964 Chevrolet Impala, Biscayne & Bel Air V8 models
- Includes clamps, hangers, and necessary hardware for a clean, easy installation
- Two tailpipe exit options depending on your vehicle’s year
-
- Long tube, unequal length design with 1-3/4 inch primaries and a 3.00-inch collector for optimized exhaust scavenging on GM Big Block engines
- Protective Silver Ceramic coated finish helps manage heat and resist corrosion while looking great
- Rugged 16-gauge tube construction with a 3/8-inch header flange for durability
- Complete kit includes collector, reducers, gaskets, and all bolts, studs, and hardware for installation
- Fits Detroit Speed & Engineering front sub frames with rack and pinion steering when big block frame stands and motor mounts are used
- High Performance grade Scavenger Series Elite engineering from Flowmaster
-
- Long tube, unequal-length design with 1-3/4 inch 16-gauge stainless primaries for optimized LS exhaust scavenging
- Heavy-duty 3/8 inch laser-cut flanges and gasket-free ball flange connectors for a precise, leak-resistant seal
- Silver Ceramic coated finish for improved heat management and lasting durability
- Complete kit includes reducers, a 3.00 inch collector, and the necessary bolts/studs
- Purpose-built for GM Gen III/IV LS engines, ideal for LS-1 and LS-6 swaps into classic Buick, Chevy, Oldsmobile and Pontiac muscle cars
-
- Replaces restrictive factory manifolds to improve throttle response, power, and engine efficiency
- 50-state legal for 2004-2010 5.4L Ford Mod Motor applications with CARB EO# D-698-18
- Stainless steel construction with durable Silver Ceramic coating for heat and corrosion resistance
- 3/8 inch laser-cut flanges and D-port inlets deliver a precise, leak-free direct-fit installation
- Includes collector, gaskets, and hardware for a complete, straightforward install
- Shorty design with 1-5/8 inch unequal-length primaries and a 2.50 inch outlet for strong scavenging
-
- Replaces restrictive factory manifolds to improve throttle response, power and engine efficiency
- Stainless steel construction with durable silver ceramic coating to handle heat and last
- 1-5/8 in. unequal-length primaries, 16-gauge tubing and 3/8 in. laser-cut flanges for a tight, leak-free seal
- Includes collectors, gaskets and M8 hardware for an easy, direct-fit installation
- 50-state legal with CARB E.O. #D-698-20 for 2002-2013 4.8L/5.3L and 2007-2013 6.0L/6.2L LS applications
-
- 2.50-inch mandrel-bent 16-gauge stainless steel tubing delivers maximum flow and corrosion resistance
- Tucks up high in the chassis for good clearance and exits straight out the back under the rear bumper
- Direct, specific fit with flat band clamping for a straightforward, secure connection
- Engineered to pair with Side Inlet/Center Outlet mufflers like the Super 44 (842546) or 50 Series (842551)
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Full 409 stainless steel construction for lasting durability and corrosion resistance
- 50 Series HD muffler with large 4.00-inch internals and a built-in resonator to keep interior sound to a minimum
- Deep, moderate-aggressive exhaust tone that stands out outside the vehicle
- Direct-fit design attaches to factory hanger locations for a quick, at-home installation
- Fits 2009-2024* (*Classic body) RAM 1500 trucks with the 5.7L Hemi and factory dual tailpipes
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a very deep, aggressive Flowmaster sound inside and outside your RAM 1500
- Direct-fit, bolt-on design uses factory hanger locations for a quick at-home install
- Built from durable 409 stainless steel for long-term corrosion resistance
- 3.00-inch mandrel-bent inlet and dual 2.50-inch outlets that connect to factory dual tailpipes
- Engineered specifically for 2009-2024* (Classic body) RAM 1500 with the 5.7L Hemi
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds a proven 21 hp and 18 lb-ft at the rear wheels on the Ram 1500 3.0L High Output
- Built entirely from 409 stainless steel for years of corrosion-resistant, trouble-free performance
- Direct-fit design uses all factory hangers and connections — easy at-home installation with included clamps and hardware
- Straight-through Flow FX absorption muffler delivers a moderate, drone-free performance tone
- Fits both 2WD and 4WD 2025–2026 Ram 1500 models and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven max gains of 13 hp and 12 lb-ft at the rear wheels for power you can feel
- Built from 409 stainless steel muffler body and piping for long-lasting, corrosion-resistant service
- Aggressive American Thunder sound from the oval Super 40-based, dual-out rear muffler
- Direct-fit design uses factory hangers and connections for an easy at-home install
- Includes flat band clamps and all necessary hardware; fits both 2WD and 4WD models
- 3.00-inch inlet and outlet with dual in/dual out configuration for improved flow
-
- Direct-fit replacement for 2019-2024 and 2026 RAM 1500 new body style trucks with the 5.7L Hemi
- Race-proven Outlaw muffler delivers a deep, aggressive interior and exterior tone
- Full 409 stainless steel construction with mandrel-bent tubing for durability and flow
- Installs in under 30 minutes using factory hanger locations, with easy-to-follow instructions included
- Fits all 2/4 wheel drives and wheelbases with either factory single or dual tailpipes
- 3.00-inch inlet, outlet, and main piping for maximum performance without losing Hemi power
-
- Dyno-proven gains of +16 hp and +21 ft-lbs at the rear wheels
- Aggressive Flowmaster Outlaw 10 Series muffler tone
- Durable 409 stainless steel body and 3.00-inch mandrel-bent piping
- Direct-fit design connects to factory tail pipes and reuses OEM hangers
- Clamps, hangers, hardware, and instructions included for easy at-home install
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 13 hp and 12 lb-ft of torque at the rear wheels — power you can actually feel
- 409 stainless steel construction for years of trouble-free, corrosion-resistant service
- Super 10-based muffler delivers an aggressive, deep exhaust tone
- True direct-fit design uses all factory hangers and connections for easy at-home installation
- Fits 2/4WD 2025–2026 RAM 1500 models with the 3.0L Standard Output engine
- Backed by Flowmaster’s Lifetime Limited Warranty and includes all necessary hardware
-
- Adds max dyno gains of 7 hp and 5 lb-ft at the rear wheels for better acceleration and towing
- Full 409 stainless steel construction resists corrosion for years of trouble-free performance
- Straight-through Flow FX absorption muffler delivers an aggressive tone with no interior drone
- Direct-fit design uses factory hangers and connections for easy DIY installation
- Includes flat band clamps, hardware, and instructions; backed by Flowmaster’s Lifetime Limited Warranty
- Fits both 2WD and 4WD 2020-2026 GM 2500HD/3500HD trucks with the 6.6L gas engine
-
- Dyno-proven max gains of 12 hp and 11 lb-ft at the rear wheels for stronger acceleration and towing
- Full 409 stainless steel muffler, pipe, and tubing for years of trouble-free, corrosion-resistant service
- Direct-fit design uses all factory hanger locations for an easy at-home installation
- Flow FX straight-through absorption muffler delivers an aggressive yet moderate tone
- Includes flat-band clamps, hardware, and installation instructions — plus Flowmaster’s Lifetime Limited Warranty
- Fits 2017-2026 Ford F250/F350 Super Duty 6.2L, 6.8L & 7.3L gas engines in both 2WD and 4WD
