Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
Flowmaster 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
18-24 Audi S5 (Coupe - 3.0) Exhaust System Kit
$3,170.73
-
Mishimoto Subaru Exhaust Adapter - 304 Stainless Steel, 3in
$64.95
-
Injen EVOLUTION Cold Air Intake System - EVO9107-P INJ-EVO9107-P
$372.02 $415.78 -
aFe Power AFE-30-10054-p Magnum FLOW OE Replacement Air Filter Ford Focus 00-03
Price range: $71.00 through $76.00
-
Magnum FORCE AFE-59-10732 Cold Air Intake System Spare Parts Kit GM Diesel Trucks 92-00 V8-6.5L (td)
$30.00 $37.50
Image
Product
Price
-
- Cleans up your engine bay by eliminating the unneeded factory fuel filter housing after an aftermarket filtration upgrade
- Dedicated WIF sensor port keeps your water in fuel sensor active and prevents false dash warnings
- Adds an extra return port for dual CP3 applications, with a -6 ORB plug included for single CP3 setups
- CNC-machined from 6061 T-6 billet aluminum for strength and a clean, professional install
- Direct fit for 2010-2018 6.7L Cummins, with new banjo bolt sealing washers included
-
- 10-micron coalescing media filters fine debris and separates water to protect your diesel fuel system
- Built-in drain makes routine servicing quick and mess-free
- 1 Inch-14 thread and internal post seal deliver a secure, properly sealed fit
- Genuine FASS Drop-In Series replacement element (CWS1010), sold as each
- Direct fitment for FASS Drop-In Series systems DIFSRAM1001–4001 and DIFSFRD1001
- Clear installation guidance for Signature and Industrial Series suction-side placement
-
- Thermostatically controlled — automatically powers on below 34°F to protect your fuel
- 300 watt heating element heats fuel as it enters the FASS System
- Prevents diesel fuel from gelling in the FASS filters
- Helps warm fuel in the tank as the FASS continually polishes it
- Automatically powers off at optimal temperature to avoid overheating fuel
- Sold as a complete kit for Truck/SUV FASS applications
-
- Automatically activates below 34°F and shuts off at operating temperature — true set-it-and-forget-it protection
- Dual electric probes heat fuel as it enters the FASS System, preventing gelling in the filters
- Aids cold-weather starts so your diesel fires up reliably in freezing conditions
- Auto shut-off eliminates any risk of overheating your diesel fuel
- Purpose-built to populate both heater ports on FASS Drop-In Series Fuel Systems
- Dispenses heat through the FASS System and filters for balanced cold-weather coverage
-
- Complete Drop-In service bundle: two XWS3002XL Extreme Water Separator Filters plus two CWS1010 Coalescing Water Separator Filters in one pack
- Two full filter sets per pack — perfect for stocking a shop or keeping your garage ready for the next fuel filter change
- Matched-filter design for RAM and Ford Drop-In systems, where the CWS1010 must be used with the XWS3002XL
- Genuine FASS Fuel Systems replacement filters (Part Number FLP1000) built for diesel Drop-In applications
- Location diagram on each filter takes the guesswork out of proper placement and installation
-
- Complete pack: three (3) XWS3002 Extreme Water Separators and three (3) PF3001 Particulate Filters for multiple services
- XWS3002 rated at 2 microns absolute and traps over 99% of water — no separator drain needed
- PF3001 144-micron particulate filter cuts cavitation, increases flow, and lowers FASS system sound output
- Ideal for shops, fleets, or keeping the garage stocked with genuine FASS fuel filters
- Correct configuration: XWS3002 on the pressure side, PF3001 on the suction side of the pump
-
- Complete maintenance pack with three Extreme Water Separators and three Particulate Filters — enough for multiple service intervals
- XWS3002XL water separator rated at 2 micron absolute traps over 99% of water with no drain needed
- 144-micron PF3001XL particulate filter reduces cavitation, improves flow, and lowers system noise
- Ideal for shops or keeping your garage stocked for future fuel filter changes
- New-generation filters engineered to work together for reliable FASS Fuel System protection
-
- Complete FP1000 pack includes both required filters — the CWS1010 Coalescing Water Separator and the XWS3002XL Extreme Water Separator
- Engineered specifically for the FASS Fuel Drop-In System for a precise, no-guesswork fit
- Extreme water separation designed to protect your diesel fuel system from water and contaminants
- Simplifies fuel filter replacement for RAM and Ford drop-in units with one part number
- Sold as a ready-to-install pack — perfect for shops or keeping your garage stocked
- Formulated for Diesel applications with a printed location diagram for proper filter placement
-
- Complete service pack — includes two XWS3002 Extreme Water Separators and two PF3001 Particulate Filters for maintaining multiple FASS systems
- XWS3002 rated at 2 micron absolute traps over 99% of water, so no separator drain is needed
- 144 micron PF3001 on the suction side reduces cavitation, improves flow, and lowers system noise
- Perfect for stocking a shop or garage with matched replacement filters
- Clear placement guidance: XWS3002 on the pressure side, PF3001 on the suction side — see the on-filter diagram
-
- Complete pack includes both the XWS3002XL Extreme Water Separator and PF3001XL Particulate Filter for a full FASS fuel filter replacement in one buy
- 2 micron absolute water separator traps over 99% of water — no drain needed
- 144 micron particulate filter reduces cavitation, boosts flow, and lowers system noise on the suction side
- Matched components engineered to work together for correct pressure-side and suction-side placement
- Sold as a pack — keep your shop or garage stocked for routine diesel fuel filter service
-
- Fully adjustable fuel pressure lets you dial in the exact pressure your performance build requires
- Works with both gas and diesel applications for maximum versatility
- Built-in pre-drilled and tapped gauge port makes monitoring and adjusting simple — no guesswork
- Boost compensation port increases fuel pressure under acceleration when demand is highest
- Purpose-built for drag race, competition pulling, and high performance marine applications
- Universal Truck/SUV fitment, sold as each (Part No. FPR1001)
-
- Warms fuel as it passes through your FASS system and filters to aid cold-weather starts
- Prevents fuel gelling while parked and while driving in extreme cold
- Automatic on/off heater begins warming with the key on and shuts off at proper temperature
- Designed to fit FASS Titanium Series Systems, which include ports for two electric heaters
- Ships as a complete installation kit for a straightforward upgrade
- Purpose-built for Truck/SUV diesel owners facing brutal winter conditions
-
- Prevents diesel fuel gelling in extreme cold, protecting your FASS filters and aiding cold-weather starts
- Fully automatic: activates below 34°F and shuts off at operating temperature to avoid overheating fuel
- Dual electric heater probes fill both ports on Titanium Signature Series systems for maximum heating
- Warms fuel entering the system and helps warm tank fuel as the FASS continually polishes it
- True set-it-and-forget-it upgrade purpose-built for Titanium Signature Series Truck/SUV applications
-
- Delivers up to 500 watts of fuel-thawing power by combining the High Output Electric Heater Disk and Dual Electric Heater Probe Kit
- True thermostatic control turns elements on below 34°F and off at optimal temperature to prevent overheated fuel
- Prevents diesel gelling in your FASS filters and warms fuel in the tank for reliable cold-weather starts
- Genuine set-it-and-forget-it operation engineered for the coldest climates
- Premium Titanium Signature Series kit for Truck/SUV FASS Fuel Systems, sold as each
-
- Genuine FASS Fuel Systems splitter (Part No. HKS1001) for the Titanium and Titanium Signature Series
- Provides an easy, secure connection when running two dual FASS Electric Heater Probes
- Ties your electric heater probes together for a coordinated dual-probe setup
- Sold as a complete kit, ready to integrate into your FASS heater configuration
- Designed for Truck/SUV diesel applications on the FASS Titanium platform
-
- Lowers internal FASS motor temperature to help protect the million-mile motor
- Direct bolt-on fit engineered specifically for compatible FASS systems
- Built to FASS Fuel Systems quality standards for dependable, long-life performance
- Adds a clean, upgraded appearance to your FASS diesel fuel system
- Designed for Truck/SUV diesel applications (Part Number HS1001K)
-
- Lowers internal FASS motor temperature to reduce heat-related wear
- Helps extend the life of the FASS million-mile motor
- Direct bolt-on fit for compatible FASS systems — easy to install
- Clean, upgraded look that dresses up your FASS fuel system
- Engineered and built to FASS Fuel Systems quality standards
- Sold individually (Part Number HS1002K) for Diesel Truck/SUV applications
-
- 2 Micron Absolute Filtration Rating captures contaminants to protect your diesel fuel system
- Rated to 300 PSI maximum pressure and a 25 GPM max flow rate for demanding fuel systems
- Genuine FASS PF1002, engineered for dependable performance and long service life
- 1-1/2 Inch-16 thread size — the updated replacement for the older PF2002 filter
- Purpose-built diesel fuel filter for Truck/SUV applications, sold individually
- Note: replacing a PF2002 with the PF1002 also requires fuel filter nipple FSN-4001
-
- 144 micron particulate filtration removes larger fuel particulates for cleaner diesel fuel
- Drastically reduces cavitation and improves flow properties in your fuel system
- Rated for up to 100 PSI and 25 GPM to support high-demand diesel applications
- Genuine FASS PF2002 replacement that fits the FASS Drop-In HD Universal DIFSHD3001
- Diesel-specific and sold as each — perfect to keep on hand for your next fuel filter change
-
- 144 micron particulate filter removes larger fuel particulates on the suction side
- Drastically reduces cavitation while increasing flow properties
- Lowers the overall sound output of your FASS system
- Genuine FASS Titanium Signature Series component, sold as each
- Designed to pair with the XWS3002 — follow the on-filter diagram for correct placement
- Ideal upgrade when replacing discontinued FF-3003/FF-3010 or FS-1001/FS-1020 filters
-
- 144-micron particulate filtration removes larger fuel particulates on the suction side
- Drastically reduces cavitation while increasing flow properties for reliable fuel delivery
- Lowers the sound output of your FASS System for quieter operation
- Extended length design adds filtration capacity for demanding diesel applications
- Purpose-built FASS replacement — pairs with the required XWS3002XL for correct staging
- Sold individually and designed for Truck/SUV FASS Fuel Systems
-
- Machined from 6061 T-6 Billet Aluminum for long-lasting durability
- Combines a 5/8 inch suction tube and 1/2 inch fuel return port in one bulkhead fitting
- PTFE Teflon suction tube trims easily to fit different fuel tank depths
- Plumbs your FASS return line directly to the bulkhead — no filler neck cutting needed
- Increases fuel delivery and lets you run safely down to about 1/8 tank
- Ideal upgrade for higher-volume FASS Titanium Series diesel fuel systems
-
- Genuine FASS Fuel Systems WH-1006R, engineered for dependable performance and long service life
- Heavy-duty 14 gauge harness wire built to handle diesel fuel system electrical loads
- Integrated relay cover helps protect connections for added durability
- Universal design fits a range of Truck/SUV diesel fuel system applications
- Sold as each so you can order exactly what your build needs
-
- Functions as both a suction point and fuel return port in one billet-aluminum kit
- Machined from 6061 T-6 Billet Aluminum with a Viton convoluted suction tube for durability
- 1/2 suction tube port pulls fuel from the factory fuel basket for increased fuel delivery
- Designed to eliminate tank fuel issues and support higher-volume FASS Titanium Signature Series Systems
- Universal fitment for Ford Powerstroke, GM Duramax, and Dodge Cummins (not for 03-04 Dodge applications)
- Unique design engineered for simple installation
Showing 1–24 of 32 results
