Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
2015 Dodge Charger (5.7, 6.4) Computer Chip Programmer
$1,566.28
-
Magnum FORCE AFE-51-10402-1-p Stage-2 Cold Air Intake System Hummer H2 03-09 V8-6.0L/6.2L
Price range: $254.33 through $525.78
-
2020 Jeep Gladiator (3.6) Computer Chip Programmer
$1,346.99
-
aFe Power AFE-77-16002 Sprint Booster Power Converter Mercedes A/C/CL/CLK/CLS/E/G/GL/M/R 00-11
$314.00
-
AIRAID Performance Air Intake System- 300-156
$449.99
Image
Product
Price
-
- Deep, powerful tone from the large-case 80 Series Cross-flow muffler with a moderate-to-aggressive exterior sound
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes for smooth flow and improved throttle response, power, and mileage
- Bolts up to factory hanger locations with U-Bolt clamps and all included hardware for an easy, no-cut install
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
-
- True dual crossmember-back design with a built-in H-pipe crossover for balanced flow and a stronger pull
- Super 44 Series mufflers deliver a deep, moderate-to-aggressive tone you can hear inside and out
- 16-gauge mandrel-bent aluminized steel with 2.50-inch dual tailpipes and a rear-bumper turndown
- Improves throttle response, power and mileage over the factory system
- Includes all hangers and hardware needed for installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Complete crossmember-back exhaust system built specifically for the 66-67 Ford Fairlane with 289, 390, or 427 engines
- 2.50-inch mandrel-bent 16 gauge aluminized steel tubing plus an H-pipe crossover to maximize flow and eliminate deceleration backrap
- Large-case Super 50 Series mufflers deliver a deep, powerful sound with built-in resonators to keep interior drone down
- Dual mandrel-bent tailpipes capped with 3.00-inch angle-polished stainless steel tips for an aggressive finished look
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty on aluminized steel systems
- Includes all necessary parts, hardware, and instructions for a complete installation
-
- Complete American Thunder cat-back exhaust system with the dual-inlet 50 Series Big Block muffler included for a deep, powerful tone
- Delivers a moderate interior tone with an aggressive exterior sound — heard without being obnoxious
- Designed to improve throttle response, power, and mileage on your 6.0 Chevrolet/GMC truck
- Tailpipe exits behind the right-side rear wheel, an ideal layout for towing
- Finished with a large 3.50-inch polished 304 stainless steel tip embossed with the Flowmaster logo
- CARB (California) compliant and uses factory hanger locations for an easy, bolt-on installation
-
- True-dual, crossmember-back design with all mandrel-bent 3.00-inch tubing for maximum flow and power
- Dual Super 40 Series mufflers plus a built-in H-pipe crossover deliver a deep, aggressive exhaust note
- Custom-bent tailpipes tuck high over the rear end and exit with a clean turn-down under the bumper
- Complete kit includes U-bolt clamps, hardware, and hangers for a straightforward install
- CARB (California) compliant with Emission Code 5, backed by a 3-year Limited Warranty
- Stainless steel version available (PN 817200) with a Lifetime Limited Warranty for added durability
-
- True dual 3.00-inch mandrel-bent aluminized steel design maximizes exhaust flow and delivers a deep, aggressive muscle car tone
- Super 40 Series mufflers in a large case are built to handle high horsepower while producing a muscular sound
- Integrated H-pipe crossover balances exhaust pressures to add hp and torque and reduce deceleration back-rap
- Improves throttle response, power, and mileage — the signature benefits of a Flowmaster system
- CARB (California) compliant and includes all necessary parts and hardware for an easy bolt-on installation
- Backed by Flowmaster’s 3 Year Limited Warranty
-
- Deep, aggressive sound from a matched pair of Super 44 Series mufflers with Delta Flow technology
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Bolt-on installation using factory hanger locations with all U-Bolt hardware and instructions included
- Emissions legal and CARB (California) compliant for street-legal peace of mind
- Dual tailpipes finished with long 2.50-inch polished 304 stainless steel tips for a show-car look
- Fits 1994-1997 Mustang GT and Cobra 4.6L or 5.0L coupes and convertibles
-
- Bolt-on, emissions-legal cat-back designed for 1994-1997 Mustang GT and Cobra with the 4.6L SOHC or 5.0L engine
- Delivers the iconic deep, aggressive 90s Mustang sound via a pair of Super 44 Series mufflers
- 2.50-inch aluminized steel mandrel-bent tubing for smooth, free-flowing performance
- Factory-style flanges and factory hanger locations make installation quick and easy
- CARB (California) compliant and emissions legal for street use
- Includes all necessary hardware and easy-to-follow instructions; fits coupes and convertibles
-
- Complete crossmember-back dual exhaust engineered specifically for 1964–1972 El Camino/Sprint V8, 2WD applications
- 2.50-inch mandrel-bent aluminized steel with a built-in H-pipe for equalized pressures, no deceleration backrap, and maximum power
- Super 50 Series mufflers deliver a deep, aggressive exterior tone with minimal interior drone
- 3.00-inch angle-cut polished stainless tips exit behind the rear wheels for an aggressive muscle-car look
- CARB compliant and includes all necessary parts and hardware for an easy fit
- Improves throttle response, power, and mileage like all Flowmaster systems
-
- Delivers a deep, powerful, aggressive tone from a pair of Super 44 Series mufflers
- Mandrel-bent 2.50-inch aluminized steel pipes support improved throttle response, power, and mileage
- Bolts on using factory exhaust hangers with all necessary parts and hardware included
- Dual tailpipes exit straight out the back with a turn down at the lower valance for a clean look
- CARB (California) compliant and backed by a 3-year Limited Warranty on aluminized steel systems
- Fits 2WD Coupes and Convertibles, with an optional stainless steel version available
-
- Deep, powerful sound from large-case Super 40 Series mufflers with a moderate-to-aggressive exterior tone and mild-to-moderate interior tone
- Improved throttle response, power, and mileage thanks to smooth mandrel-bent aluminized steel tubing
- Muscular looks with dual 2.50-inch tailpipes and dual 3.00-inch polished stainless steel tips
- Easy bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Complete 2.50-inch dual exhaust custom designed for 1964-1966 Ford Mustang (non-GT, hardtop, 2WD)
- Pair of 40 Series Delta Flow mufflers delivers a deep, powerful sound with moderately aggressive exterior and moderate interior tone
- 16-gauge aluminized steel with all mandrel-bent tubing and an H-pipe for improved throttle response, power, and mileage
- Polished stainless steel tailpipe tips that tuck up for maximum clearance and a show-car look
- Includes all necessary parts, hardware, and instructions for an easy install, backed by a 3-Year Limited Warranty
- CARB (California) compliant with U-bolt clamping for a secure, straightforward fit
-
- Direct-fit cat-back designed specifically for 1992-1995 Chevy Blazer and GMC Jimmy 5.7L (4WD)
- Super 50 Series muffler delivers a deep, powerful tone with mild-to-moderate cabin sound and moderate exterior volume
- Full 3.00-inch mandrel-bent aluminized steel inlet and tailpipe for efficient exhaust flow
- Bolt-on installation using factory hanger locations, U-bolt clamps, and all necessary hardware included
- CARB compliant and emissions-legal, backed by Flowmaster’s 3-year Limited Warranty
- Angle-cut turn-down tip exits behind the right rear wheel for a clean, aggressive look
-
- Aggressive exterior tone with a moderate interior sound thanks to the aluminized steel Super 50 Series muffler
- Heavy 16-gauge mandrel-bent aluminized steel tubing for durability and maximum performance
- Dual 2.50-inch tailpipes clear the factory spare tire and exit straight out back for a muscular look
- Complete cat-back system includes all parts, hardware, and instructions for easy at-home installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Complete true dual crossmember-back kit with 2.50-inch mandrel-bent stainless steel tubing for maximum flow
- Dual Super 44 Series mufflers deliver a moderate to aggressive interior and exterior tone
- Built-in H-pipe/balance tube plus improved throttle response, power, and mileage
- Angle-cut brushed stainless steel tips exit straight out under the rear bumper for a clean finish
- Includes all hangers and hardware, is CARB compliant, and backed by a Lifetime Limited Warranty
- Engineered for 1969 Camaro and Firebird V8 models, including Convertibles with a simple X-brace adjustment
-
- Deep, powerful exterior tone with a mild to moderate interior sound level for everyday livability
- Super 50 Series performance muffler and specially designed resonator keep the cabin comfortable while boosting flow
- Mandrel-bent 3.00-inch aluminized steel tubing improves throttle response, power, and mileage
- Dual 2.50-inch tailpipes finished with 3.00-inch polished stainless steel tips for a subtle custom look
- Uses factory hanger locations with U-bolt clamps and includes all parts and hardware for an easy fit
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Aggressive, deep exhaust tone from a pair of Super 44 Series mufflers for enthusiasts who want to be heard
- Mandrel-bent 2.50-inch stainless steel inlet and tailpipes deliver maximum flow and lasting durability
- Improved throttle response, power, and mileage in a complete cat-back package
- Uses factory exhaust hangers with all parts and hardware included for a quick, easy installation
- CARB (California) compliant and backed by a Lifetime Limited Warranty
- Clean straight-back exit with a turn down at the lower valance; exhaust tips sold separately for a custom finish
-
- True-dual 3.00-inch mandrel-bent design with a built-in H-pipe crossover for balanced flow and maximum power
- Dual Super 40 Series performance mufflers deliver a deep, powerful, aggressive exhaust note
- Built from durable 409 stainless steel and backed by a Lifetime Limited Warranty
- Custom-bent tailpipes tuck up high and exit with a clean turn-down under the rear bumper
- Purpose-built for 1968-1972 GM A-Body V8s (2WD) and CARB compliant
- Comes complete with all necessary hardware and hangers for installation
-
- Purpose-built for 1964-1966 Ford Mustang V8 hardtop coupes (2WD) as a complete crossmember-back system
- Free-flowing 2.50-inch mandrel-bent stainless H-pipe and dual 40 Series Delta Flow mufflers for power and that iconic deep tone
- 2.50-inch 304 stainless steel tips and high-tucked tailpipes deliver a true show-car look
- Includes all necessary parts, hardware, and easy-to-follow instructions for a bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete bolt-on catback exhaust system engineered specifically for the 2015-2023 Dodge Challenger 3.6L
- Durable 409S stainless steel with 2.50-inch mandrel-bent tubing for smooth, unrestricted flow
- Scavenger X-pipe crossover and dual Super 44 mufflers deliver deep sound and maximum power
- Aggressive/moderate exterior tone paired with a mild interior sound for everyday driving comfort
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all necessary parts and hardware for an easy, straightforward installation
-
- Complete dual cat-back system with mandrel-bent 2.50-inch stainless steel tubing for maximum flow
- Includes matched Super 40 Series mufflers for an aggressive, unmistakable exhaust tone
- Delivers improved throttle response, power, and mileage in a single upgrade
- Large 3.00-inch polished dual tips exit in the factory location for a clean, aggressive look
- Uses factory hanger locations with all hardware and instructions for an easy at-home install
- CARB (California) compliant for legal, worry-free fitment
-
- Increases horsepower, torque, and mileage on 2001-2006 GM Suburban, Avalanche, and Yukon XL 1500 SUVs
- 16-gauge mandrel-bent stainless steel construction for maximum flow and long-term durability
- Super 50 Series muffler with dual chambered resonators delivers a moderate interior tone and deep exterior sound
- Dual 2.50-inch side-exit tailpipes finished with large 4.00-inch polished 304 stainless tips
- Includes all parts and hardware for a great-fitting install, plus CARB compliance and a Limited Lifetime Warranty
-
- Fully built from 16-gauge mandrel-bent stainless steel with a 50 Series HD muffler for durable, free-flowing performance
- Aggressive yet moderate exterior tone engineered to minimize drone inside the cab
- Choose dual side-exit for towing clearance or straight-out-the-back for a muscular look
- Finished with large 3.00-inch polished stainless steel tips and dual 2.50-inch mandrel-bent tailpipes
- Includes all parts and hardware for an easy at-home installation, backed by a Lifetime Limited Warranty
- CARB compliant and fits both 2WD and 4WD 2004-2005 Ram 1500 5.7L Hemi models across all wheelbases
-
- Complete true dual crossmember-back exhaust built specifically for 1968-1972 GM A-body V8 vehicles
- 2.50-inch mandrel-bent stainless steel tubing plus a built-in H-pipe improves throttle response, power, and mileage
- Large-case Super 40 Series mufflers deliver an aggressive interior and exterior tone
- Dual 2.50-inch tailpipes exit at a slight down angle under the rear bumper for a muscular look
- Includes all hangers and hardware needed for installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 73–96 of 170 results
