Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Dinan DINANTRONICS X - 2020 Toyota GR Supra 3.0
$699.95 $787.95 -
AIRAID Universal Air Filter- 720-472
$188.99
-
Chevrolet, GMC (4.3, 5.3) Exhaust System Kit
$1,081.04
-
Mishimoto MMSK-TDP-WH White Teardrop Shift Knob
$70.95
-
AEM-AE-20993 DryFlow Air Filter
$83.99
Image
Product
Price
-
- Improves power, mileage, and throttle response on the 5.7L Hemi
- Scavenger Series X-pipe and dual Super 44 mufflers deliver a deep, powerful muscle-car tone
- Moderate exterior sound with a mild interior tone for comfortable daily driving
- Twin brushed 304S stainless tips exit cleanly within the factory rear fascia bezels
- Durable 2.50-inch mandrel-bent stainless steel construction throughout
- CARB compliant and engineered to fit 2011-2014 Charger R/T and Chrysler 300, including AWD
-
- Delivers Flowmaster’s most aggressive interior and exterior exhaust tone from the race-oriented Outlaw series
- Improves throttle response, power, and mileage while transforming your vehicle’s sound
- Dual tail pipe design with black-finished pipes for a bold, purpose-built look
- Includes the Outlaw-series muffler plus all necessary parts and hardware for a quick, easy install
- Uses factory-style connections for a clean axle-back fit behind the rear axle
- CARB (California) compliant with Emission Code 5 for confident, street-legal upgrading
-
- Complete crossmember-back kit with mandrel-bent 2.50-inch stainless steel tubing and all installation hardware included
- Dual Super 44 Series mufflers plus a built-in H-pipe crossover deliver a balanced, aggressive exhaust note
- Four tailpipe exit options — angled down, straight out back, side exit, or dump style — to match your build
- Purpose-built for 1967-1972 Chevy/GMC C10 and C15 1/2-ton 2WD coil-spring trucks, short or long wheelbase
- Ample clearance for substantially lowered trucks, plus CARB compliance and a Lifetime Limited Warranty
-
- Frees up flow over the restrictive factory transverse muffler for maximum performance
- Super HP-2 muffler delivers a moderate-to-aggressive exhaust note
- High-tucked 3.00-inch polished stainless tip improves off-road ground clearance
- Fits 2007-2018 Jeep Wrangler JK 2-door and 4-door with 3.8L or 3.6L engines
- CARB (California) compliant and includes all hardware for easy at-home installation
- Mandrel-bent 2.50-inch stainless steel tailpipe with dual pipe design
-
- Deep, aggressive Hemi sound from a pair of Super 44 Series mufflers with a livable moderate-to-aggressive character
- Dual 2.50-inch Scavenger Series X-Pipe and mandrel-bent tubing for maximum flow and a deep performance tone
- Durable 409S stainless steel construction with 2.50-inch stainless tips that exit through the factory rear valance bezels
- True bolt-on kit with flanged connections and all necessary parts and hardware included for an easy fit
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2015-2016 Charger R/T and 2015-2023 Chrysler 300 with the 5.7L Hemi
-
- Deep, muscular tone with mild-to-moderate volume that stays comfortable inside the cabin
- Full mandrel-bent 2.50-inch stainless steel tubing with Scavenger Series X-pipe and dual 60 Series mufflers for real performance gains
- Large 4.00-inch polished 304S stainless steel logo tips exit in factory locations for a clean OE-style look
- CARB compliant and emissions-legal on the 5.7L Hemi, fitting both 2WD and 4WD Durango models
- Bolt-on install with all necessary parts and hardware included, backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete crossmember-back kit for 1968-1969 Chevrolet Corvette (2WD) with everything needed for a trouble-free install
- Dual 2.50-inch mandrel-bent stainless tubing and Scavenger X-pipe deliver maximum power and a deep, unique tone
- 50 Series Delta Flow mufflers provide a moderate exterior and mild interior sound level
- Highly polished 304 stainless steel tips exit cleanly through the factory cutout bezels
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
- Ideal for Big Block applications and high-performance small block engines
-
- Delivers a deep, aggressive exterior tone with a mellow growl inside the cab
- All stainless steel construction with a Super 40 Series muffler and 2.50-inch mandrel-bent dual tailpipes
- Includes two sets of final pipes so you can run dual-out-the-back or dual-behind-the-rear-tires for towing
- Finished with 3.50-inch double-wall polished stainless steel tips for a clean look
- CARB compliant and emissions-legal with all hardware included for easy at-home bolt-on installation
- Fits 2009-2021 Toyota Tundra 4.6L, 4.7L, and 5.7L trucks in 2WD and 4WD
-
- Delivers maximum, aggressive sound inside and outside the truck via the dual inlet Super 10 Series muffler
- Full stainless steel construction with 3.00-inch dual tailpipes for maximum flow and performance
- Two sets of tailpipe exits let you run dual out the back or dual behind the rear tires for towing
- Finished with 4.00-inch black ceramic coated, double wall stainless tips with embossed logo
- Emissions-legal and CARB compliant with all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, streetable tone from stainless steel Super 44 Series mufflers
- Dual 2.50″ 409S stainless tailpipes with a welded H-Pipe for balanced flow and sound
- Mandrel-bent pipes reduce restriction to maximize performance
- Direct bolt-on fit for 1962-1967 Chevy II/Nova (2WD) with all parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a very aggressive exhaust tone inside and outside your Camaro SS, powered by dual stainless steel Outlaw Series mufflers
- Improves throttle response, power, and mileage thanks to 2.50″ mandrel bent stainless steel pipes
- Finished with polished 4.00″ stainless steel dual tips for a bold, purposeful look
- Emissions-legal and CARB (California) compliant for street use
- Easy bolt-on axle-back design includes all necessary parts and hardware for installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderately aggressive exterior sound with a moderate, comfortable interior tone
- Full stainless steel construction with 2.50-inch mandrel-bent tubing and a Super 50 Series muffler for smooth, freer flow
- Dual 3.50-inch polished stainless tips exit behind the rear tires — great for towing and a bold rear look
- Uses factory hanger locations and includes all hardware and instructions for an easy at-home install
- CARB (California) compliant and fits all 2016-2023 Tacoma Access/Double Cab 3.5L 2WD and 4WD wheelbases
-
- Moderate exterior tone with a mild interior sound—performance without cabin drone
- Stainless steel 80 Series Crossflow muffler and dual 2.50-inch mandrel-bent tailpipes included
- Polished stainless 3.50-inch tips with embossed logo for a clean, upgraded look
- Bolt-on installation using factory hanger locations—easy to do at home with included hardware and instructions
- CARB compliant and emissions-legal, purpose-built for 2012-2018 Jeep Wrangler JK/JKU 3.6L
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate interior sound level for daily comfort
- 409S stainless steel with dual 2.50-inch mandrel-bent tubing and Scavenger X-pipe for maximum flow and a deep tone
- Includes Super 44 performance mufflers and specially-tuned chambered resonators to minimize interior drone
- True bolt-on install with all necessary parts, hardware and easy-to-follow instructions
- CARB (California) compliant and fits 2015-2023 Charger SE/SXT and 2015-2020 Chrysler 300S 3.6L models
- Dual 2.50-inch stainless tips exit within the factory rear bumper valence for a clean look
-
- Aggressive yet balanced sound from Super 44 Series mufflers — deep and powerful outside, comfortable inside
- Fits 2015-2017 Ford Mustang GT 5.0L, both coupes and convertibles
- Durable 409 stainless steel construction with large 4.00-inch polished stainless tips and embossed logo
- Bolt-on axle-back design includes all parts and hardware for an easy fit
- CARB compliant and emissions-legal, backed by the Flowmaster Lifetime Limited Warranty
-
- Aggressive exterior tone with a moderate interior sound level—louder presence without excessive cabin drone
- CARB (California) compliant and emissions-legal for confident street use
- Bolt-on install using factory hanger locations, with all hardware and instructions included
- Mandrel-bent stainless steel tubing and specially tuned resonator/mufflers for smooth flow and a deep tone
- Finished with large 4.00-inch polished stainless steel tips and an embossed logo
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive muscle car sound both inside and outside the vehicle from Flowmaster’s chambered cross-flow design
- Same-end inlet and offset outlet route cleanly in front of the axle for a side-exit style system
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with a 2.50-inch inlet for flexible custom and replacement builds
- Delivers a classic layout similar to AAR Cuda exhaust systems
-
- Ball-and-socket design delivers a leak-free, gasket-free connection with no gaskets to burn out or replace
- Replaces standard three-bolt flange connections for a cleaner, more reliable header-to-exhaust joint
- Heavy-duty 16-gauge aluminized steel with a thick 3/8-inch header flange resists heat, corrosion, and warping
- 2.50-inch inside diameter slip-fit connections on both ends with straight-pipe inlet and outlet
- Reversible design plus included bolts and studs; conveniently sold in pairs
-
- Delivers the loudest, most aggressive sound in Flowmaster’s Super series lineup via a single chamber design
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Patented Delta Flow® technology engineered for maximum performance
- 2.50-inch inlet with universal fitment for Plymouth 225 through 440 muscle car builds
- High-temperature paint finish stands up to the heat
- Ideal off-highway upgrade for enthusiasts building an aggressive performance exhaust
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, highest-performing street tone in a four-inch case
- 16-gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50-inch inlet, ideal for late-model muscle car and custom builds
- Compact 9.50-inch body width with a protective high-temperature paint finish
- Rich, powerful, aggressive sound level tuned for the street
-
- Three chamber Delta Flow® design reduces interior resonance while keeping the same exterior tone as the two chamber version
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet makes it a versatile choice for custom exhaust builds
- Moderate sound level tuned for comfortable street/strip driving without excessive cabin drone
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delivers the iconic aggressive Flowmaster tone inside and out
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with 2.50″ dual inlet and dual outlet for flexible builds
- Ideal aggressive muffler for street rod and custom exhaust systems
-
- Delivers the deep, powerful sound of the Original 40 Series with reduced interior resonance thanks to Delta Flow® technology
- Larger case profile shines on forced induction and high-horsepower vehicles, balancing performance and sound
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Race-derived Super 40 Series design engineered from Flowmaster’s Top Ten race muffler lineup
- Universal fitment with a 2.50-inch inlet makes it ideal for street rod and custom exhaust builds
-
- Delta Flow® two-chamber design with Delta deflectors for increased scavenging and improved performance
- Aggressive exhaust tone with reduced interior resonance and drone
- Milder exterior tone than the standard 40 Series for a more livable daily setup
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 2.50-inch inlet fitment for flexible custom and replacement builds
- High-temperature paint finish for lasting protection against heat and the elements
Showing 145–168 of 188 results
