Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black Dodge Diesel Trucks 03-07 L6-5.9L (td)
$468.00 $585.00 -
Edge Products CTS3 Diesel Evolution Programmer - EDG-85400-100
$799.95 $899.95 -
Mishimoto Red Silicone Radiator Hoses – 1991-2001 Jeep XJ 4.0L
$165.95
-
BBK 1835 COLD AIR INTAKE REPLACEMENT HARDWARE KIT
$59.99 $69.99 -
Flowmaster Flow FX Muffler
$163.26
Image
Product
Price
-
- Dual-mode design delivers a refined performance tone daily and a deep, open exhaust sound at the push of a button
- Wireless W.A.V.E. Technology™ with two included key fobs makes switching sound modes effortless
- Direct-fit for 2009-2024 RAM 1500 (Classic body) 5.7L Hemi trucks with factory dual exit exhaust
- Durable mandrel-bent 409 stainless steel construction throughout for long-lasting performance
- Complete kit includes actuator motor, control unit, wiring, clamps, and detailed instructions
- Uses factory hangers and OEM-style exit for a clean, straightforward installation
-
- Two exhaust modes in one muffler — a moderate performance tone for daily driving and an aggressive open-exhaust sound activated with the wireless key fob
- W.A.V.E. Technology wireless active by-pass valve redirects exhaust through a 3.00-inch turndown for deep, open sound on demand
- Direct-fit installation uses factory hangers and connects to the factory tailpipe — no cutting required
- Durable 409 stainless steel body, mandrel-bent tubing, and round turndown tip built to resist corrosion
- Complete kit includes actuator motor, control unit, two wireless key fobs, wiring, clamps, hardware, and instructions
- Delivers maximum dyno gains of 9 hp and 11 lb-ft at the rear wheels on 2019-2026 Silverado/Sierra 1500 5.3L trucks
-
- Delivers a deep, aggressive-yet-moderate tone from Flow FX straight-through mufflers and a Scavenger Series X-pipe
- Retains your Factory Active Exhaust Valves by reusing the OEM actuators for seamless integration
- Full mandrel-bent 3.00-inch stainless steel construction for smooth, high-performance flow
- Aggressive 4.50-inch black ceramic-coated 304 stainless tips with embossed Flowmaster logo exit within the rear valance
- CARB (California) compliant and street-legal with emission code 5
- Bolts up to factory hanger locations with all hardware and detailed instructions included for at-home install
-
- Adds real power with max dyno gains of 11 hp and 15 lb-ft at the rear wheels
- Super 50 series muffler and tuned resonators deliver a moderate/mild tone without cabin drone
- Mandrel-bent 409 stainless steel tubing maximizes flow and resists corrosion
- Bolt-on install using factory hanger locations with all necessary hardware included
- Large 4.00-inch polished stainless tip with embossed logo for a custom finish
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct-fit cat-back system for the 1987-1993 Ford Mustang GT 5.0L that installs at home using factory hanger locations
- 409 stainless steel with 16-gauge 2.5-inch mandrel-bent tubing for lasting durability and unrestricted flow
- Straight-through Flow FX mufflers deliver a deep, powerful exterior tone while keeping interior sound very mild
- Dual tailpipes exit in the stock location behind the rear valance for a clean factory appearance
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all hardware and detailed instructions for a quick, bolt-on installation
-
- Bolt-on axle-back installation using factory hangers with all hardware and instructions included
- Stainless steel 80 Series™ crossflow muffler paired with dual 2.50-inch mandrel-bent tailpipes
- Large 4.00-inch black ceramic-coated 304 stainless tips with embossed Flowmaster logo for a stealthy look
- Moderate exterior tone and mild interior sound for comfortable daily and trail driving
- CARB compliant and emissions-legal, fits 2018-2026 Jeep Wrangler JL 3.6L and 2.0L turbo
- Backed by the Flowmaster Lifetime Limited Warranty
-
- Flowmaster Force II axle-back exhaust engineered to fit 2018-2026 Jeep Wrangler JL with the 3.6L V6 or 2.0L turbo
- Moderate exterior tone and mild interior sound for performance without cabin drone
- Stainless steel 80 Series cross-flow muffler with dual 2.50-inch mandrel-bent tailpipes and 4.00-inch polished tips
- True bolt-on install using factory hangers, with all parts, hardware, and instructions included
- CARB (California) compliant, emissions-legal Dual Out Rear system
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel construction with dual 2.50-inch mandrel-bent tubing for durability and smooth flow
- Scavenger X-Pipe and Flow FX straight-through mufflers produce a deep, aggressive tone with a moderate interior sound level
- Purpose-built for the 2011-2014 Dodge Charger R/T and Chrysler 300C 5.7L Hemi
- Uses factory hangers and exits within factory bezels for a stealthy, OEM-style look with easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel construction with dual 2.50-inch mandrel-bent tubing for lasting durability and smooth flow
- Scavenger Series X-Pipe and straight-through Flow FX mufflers deliver a deep, aggressive tone with a moderate interior sound level
- Mounts to factory hangers and exits through factory bezels for a stealthy, OE-style look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all necessary parts, hardware and detailed instructions for an easy at-home install
- Purpose-built for the 2009-2014 Dodge Challenger R/T 5.7L Hemi
-
- Durable 409 stainless steel construction with 16-gauge 2.5-inch mandrel-bent tubing for unrestricted flow
- Straight-through Flow FX mufflers deliver a deep, powerful exterior tone while keeping interior sound very mild
- Stock-style polished stainless steel dual tailpipes with laser-etched Flowmaster logo for the classic 5.0 look
- Bolts to factory hanger locations and includes all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Complete cat-back kit with mufflers included — a purpose-built fit for 1986-1993 Mustang LX (1986 GT) 5.0L
-
- Full stainless steel construction with silver-finished mufflers and pipes for lasting durability and corrosion resistance
- Dual 2.50-inch mandrel-bent tubing and a Scavenger X-Pipe cross-over maximize exhaust scavenging and performance
- Flow FX straight-through mufflers deliver a deep, aggressive exterior tone with a moderate interior sound level
- Bolts to factory hangers and exits through factory bezels for a stealthy, direct-fit look on the 2015-2016 Challenger R/T 5.7L Hemi
- CARB compliant and 50-state legal, backed by Flowmaster’s Lifetime Limited Warranty
- Complete kit includes all necessary parts, hardware, and detailed instructions for an easy at-home installation
-
- Adds up to 11 hp and 8 lb.-ft. of torque at the rear wheels over stock
- Durable 409 stainless steel construction with 2.5-inch mandrel-bent tubing for better flow
- Aggressive-to-moderate sound from dual Flow FX series mufflers
- Dual 4.0-inch black ceramic coated stainless steel tips for a custom look
- Bolts to factory hanger locations with included hardware and instructions for easy home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderate/mild exhaust note with Super 50 series mufflers and tuned resonators for great sound without cabin drone
- Mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Scavenger X-pipe helps increase torque and control interior sound
- Dual 4.00-inch polished stainless steel tips with embossed logo for a custom look
- Easy bolt-on install using factory hanger locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct bolt-on fit for 2018-2026 Jeep Wrangler JL 2-door and 4-door with the 3.6L engine, using factory hangers
- Aggressive exterior tone with a mild interior note thanks to the 80 Series crossflow muffler and dedicated reflection resonator
- Full stainless construction with 2.50-inch mandrel bent inlet and dual tailpipes for smooth, unrestricted flow
- Stealthy dual 4.00-inch black ceramic coated tips with embossed Flowmaster logo
- CARB (California) compliant, emissions-legal system that includes the muffler and all necessary hardware for easy at-home installation
-
- Aggressive interior and exterior sound from race-inspired Outlaw series mufflers
- Direct fit for 2015-2016 Charger R/T and 2015-2023 Chrysler 300 with the 5.7L Hemi
- Exclusive 2.50-inch Scavenger Series X-pipe delivers a deep, unique tone
- Durable 409S stainless steel mandrel-bent tubing with dual 2.50-inch stainless tips
- Bolt-on install using factory hangers, with all parts, hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct-fit bolt-on cat-back for 2017-2023 Dodge Charger R/T and Daytona 5.7L Hemi
- Dual 3.00-inch mandrel-bent Scavenger Series X-Pipe and Super 40 mufflers with 3.50-inch internals for maximum power and aggressive tone
- Durable 409S stainless steel construction built to last
- Re-uses factory exhaust valves and exits through factory tips for a clean OEM look
- CARB (California) compliant with all parts, hardware, and instructions included
- Aggressive exterior sound with a moderate, pleasant interior tone at cruise
-
- Delivers aggressive interior and exterior sound levels from your 5.7L Hemi with race-inspired Outlaw Series mufflers
- Dual 2.50-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe maximize flow, performance and tone
- Finished with 4.00-inch black ceramic coated stainless steel tips and embossed Flowmaster logos for a bold look
- Bolt-on install using factory hangers, with all necessary parts, hardware and instructions included
- CARB (California) compliant and fits 2005-2010 Charger R/T, Magnum R/T and 300C, including all-wheel drive models
-
- Aggressive Outlaw Series sound inside and out, built for the 2017-2023 Charger R/T and Daytona 5.7L Hemi
- Dual 3.00-inch mandrel bent 409S stainless tubing with an exclusive Scavenger Series X-pipe for maximum flow and a deep tone
- Active Exhaust Valves pair with your factory actuators, keeping OEM-style on-demand sound control
- Dual 3.00-inch tailpipes exit in the stock location through the factory exhaust bezels for a clean, OEM-style look
- Bolt-on install using factory hangers with all hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive interior and exterior sound thanks to race-proven Outlaw Series mufflers and a Scavenger X-pipe
- Dual 3.00-inch 409S stainless steel mandrel-bent tubing flows hard for real performance
- Bolt-on install uses factory hanger locations and includes all hardware plus instructions
- Polished 4.00-inch stainless tips with embossed logo exit cleanly through the factory cutouts
- Retains factory active exhaust functionality by reusing your OEM valve actuator
- CARB (California) compliant for emissions-conscious enthusiasts
-
- Delivers an aggressive exterior sound while keeping a moderate, pleasant interior tone at highway speeds
- Built from 409S stainless steel with 3.00-inch mandrel-bent tubing and dual Super 44 mufflers for maximum power and sound
- True bolt-on install that uses factory hangers and includes all parts, hardware and instructions
- Finished with quad 4.00-inch polished 304 stainless steel tips with an embossed logo
- CARB (California) compliant and fits both Coupe and Convertible 2018-2023 Mustang GT 5.0L models
-
- Deep, moderate performance tone from the proven 50 Series HD muffler — aggressive outside, comfortable inside for daily and towing miles
- Durable 16-gauge mandrel-bent 409 stainless steel construction with large 4.00-inch polished 304 stainless tips
- Two included exit configurations — straight-out under the bumper or side-exit behind the rear wheels for towing
- Bolts to factory hanger locations with all hardware and instructions included for an easy install
- CARB (California) compliant and backed by a Lifetime Limited Warranty
- Direct fitment for 2014-2024 RAM 3500 Crew Cab and Mega Cab 6.4L Hemi, 2WD/4WD, single or dual rear wheels
-
- Aggressive-to-moderate Flowmaster tone from a pair of Super 44 Series mufflers
- Mandrel-bent 2.50-inch stainless steel tubing with a built-in H-pipe crossover for better scavenging
- Purpose-built for 1967-1972 Chevy/GMC K10-K2500 4WD V8 trucks, short or long wheelbase
- Three tailpipe exit options: turndown, side exit, or straight out the back
- CARB compliant (Emission Code 5) and backed by a Lifetime Limited Warranty
- Includes new hangers and all necessary installation hardware
-
- Mandrel-bent 2.50-inch 409 stainless steel tubing maximizes flow and resists corrosion for long-term durability
- Dual Super 44 Series mufflers deliver a deep, aggressive-to-moderate Flowmaster rumble inside and out
- Built-in H-pipe crossover balances exhaust flow and sharpens the exhaust note
- Choose from three tailpipe exits: straight rear, side exit, or dumped behind the rear tires
- Uses factory hangers and includes all hardware for a straightforward at-home installation
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
-
- Dyno-proven gains of 6 hp and 7 lb-ft at the rear wheels over stock on the 5.3L Tahoe/Yukon
- Super 40 Series muffler delivers a moderate-to-mild tone, with a tuned resonator to control interior drone
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and longevity
- Larger 3.50-inch polished stainless tip with embossed logo for a clean, custom look
- Bolts to factory hanger locations with all hardware included for an easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 1–24 of 26 results
