Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Mishimoto Performance One-Way Check Valve, 3/4-In, MMFT-CHKVLV-34
$79.95
-
Mishimoto Performance Intercooler Kit for 2003-2007 Dodge 5.9L Cummins
$1,525.95
-
JLT CAI-75-5148 Cold Air Intake with Snap-In Lid For 2015-2022 Ford Mustang GT350 5.2L Cotton Cleanable Red
$349.00
-
AEM-21-844C Cold Air Intake System
$479.99
-
Mishimoto MMTS-F2D-08L Low-Temperature Thermostats for Ford 6.4L
$99.95
Image
Product
Price
-
- Purpose-built fitment for 2015-2020 Ford F-150 with 2.7L, 3.3L, 3.5L, and 5.0L engines
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Flow FX muffler delivers a deep, powerful, aggressive/moderate exhaust sound
- Bolt-on install using factory hangers with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers an aggressive-to-moderate exhaust note with increased performance from the Flow FX series muffler
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and resists corrosion
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Application-specific fit for the 2007-2014 Toyota FJ Cruiser 4.0L
-
- Adds up to +8 hp and +15 lb-ft at the rear wheels on the 6.2L Camaro
- Flow FX straight-through mufflers deliver an aggressive-to-moderate tone
- Durable 409 stainless steel with 3.00-inch mandrel-bent pipes for better flow
- Bolt-on install using factory hangers, with all hardware and instructions included
- Dual-exit 4.50-inch black ceramic tips with embossed Flowmaster logo
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of +11 hp and +15 lb-ft of torque at the rear wheels
- Straight-through Flow FX muffler delivers an aggressive-to-moderate sound level
- 409 stainless steel construction with mandrel-bent 3.5-to-dual-3.0-inch pipes for durability and flow
- Dual side exit with 4.50-inch black ceramic tips and embossed logo for a custom look
- Easy at-home install using factory hangers, with all hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max dyno gains of 13 hp and 16 lb-ft of torque at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Flow FX muffler delivers an aggressive-to-moderate exhaust tone
- Larger 4.50-inch black ceramic-coated tip with embossed logo for a custom look
- Bolt-on install using factory hangers with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Flow FX muffler tone with increased performance over the restrictive factory exhaust
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and lasting durability
- Bolts on using factory hangers and included hardware for a quick, straightforward install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Delivers a deep, mellow, moderate performance tone that sets it apart from chambered mufflers
- Straight-through 3.00-inch stainless steel perforated core promotes smooth flow and a refined exhaust note
- Fully MIG-welded 409 stainless steel construction with embossed Flow FX logo on both sides for lasting durability and looks
- Reversible internal flow design installs in either direction to suit your application and offsets
- Compact case size and universal Truck/SUV fitment make installation easier in tight spaces
- Show-quality performance muffler at an economical price point
-
- Direct-fit axle-back upgrade for 2005-2010 Mustang GT, Shelby GT, GT500 (incl. GT500KR), California Special and Bullitt with 4.6L/5.4L engines
- Straight-through Flow FX mufflers with 3.00-inch cores deliver deep, aggressive-yet-moderate tone and strong flow
- Durable 409S stainless steel construction with dual 3.00-inch mandrel-bent tubing
- Large 4.50-inch ceramic-coated stainless tips with embossed logo fill the factory valance cutouts
- Bolts to factory hanger locations with all hardware and instructions included for easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 17 hp and 18 lb-ft at the rear wheels on the dyno
- Deep, aggressive-to-moderate exhaust tone from the Flow FX muffler
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow
- Dual 4.00-inch black ceramic-coated tips with embossed logo for a custom look
- Includes all hardware and new hangers with factory mounting locations for easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 12 hp and 13 lb-ft at the rear wheels for real, measurable performance gains
- Flow FX muffler delivers a deep exhaust tone at a moderate, daily-driver-friendly sound level
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and long-term durability
- Dual 4.00-inch black ceramic-coated tips with embossed logo add a custom, aggressive look
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max gains of 10 hp and 10 lb-ft of torque at the rear wheels over stock on the 6.0-liter engine
- Durable 409 stainless steel throughout with 3.50 to 3.00-inch mandrel bent pipes for better flow
- Aggressive yet moderate Flow FX tone with dual 4.00-inch stainless tips and embossed logo
- Bolt-on install that uses factory hanger locations and includes all hardware and instructions
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct-fit for 2011-2019 GM 2500HD/3500HD extended or crew cab with 6.5-foot bed
-
- Outlaw® Series dual mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing plus quad 4.00-inch black ceramic coated 304 stainless tips
- Includes valves to work with your factory active exhaust actuators for on-demand sound
- Bolts on using factory hangers with all parts, hardware, and instructions for at-home installation
- CARB (California) Compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2023 Mustang GT 5.0L (Active Performance Exhaust) coupes and convertibles
-
- Race-proven Outlaw Series mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing for high flow, durability, and longevity
- Quad 4.00-inch polished stainless steel tips with embossed logo for an aggressive, attention-grabbing look
- Includes valves to reuse your factory exhaust actuators, preserving on-demand active exhaust control
- Bolts on using factory hangers with all hardware and detailed instructions for an easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Moderate, deep and mellow tone that stands apart from the traditional chambered Flowmaster sound
- Straight-through 3.00-inch stainless steel perforated core keeps flow strong on large displacement gas engines
- Reversible internal flow design lets you install it in either direction to fit your application
- Fully MIG-welded bright 409 stainless steel case with embossed Flow FX logos for a show-quality finish
- Compact case size and economical price make genuine Flowmaster performance easy to fit and afford
-
- Economical alternative to a full cat-back — upgrade sound and flow without the higher cost
- Deep, powerful moderate-to-aggressive tone inside and outside the cab
- Straight-through Flow FX muffler with 3.00-inch mandrel-bent tubing for great sound and maximum performance
- True direct-fit: uses factory hangers and connections, installs in about 25 minutes
- Durable 409 stainless steel construction backed by a One (1) Year Limited Warranty
- Includes clamps, hardware and instructions; fits all 2019*–2024 and 2026 RAM 1500 5.7L Hemi, 2WD/4WD and all wheelbases
-
- Deep, moderate performance sound from the Flow FX straight-through muffler without excessive cabin drone
- 409S stainless steel construction plus a black ceramic-coated 304S stainless tip for lasting durability and custom looks
- Bolts to all factory hanger locations for a simple, at-home installation with included hardware and instructions
- 3.00-inch mandrel-bent tailpipe promotes smooth, unrestricted flow for maximum performance
- CARB (California) compliant, so it’s street-legal in emissions-strict states
- Fits 2014-2019 Silverado/Sierra 4.3L and 5.3L trucks in 2wd and 4wd configurations
-
- True direct-fit for 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost — no cutting or welding
- Straight-through Flow FX muffler with dual 3.00-inch inlets/outlets for great sound and maximum flow
- Durable construction: 304 stainless steel muffler body with 3.00-inch mandrel-bent 409 stainless tubing
- Moderate-to-aggressive sound delivers a deep, powerful exhaust note inside and out
- Installs in under 30 minutes using factory hangers — clamps, hardware, and instructions included
-
- 3-inch mandrel-bent tubing and a straight-through Flow FX muffler deliver smooth, high-flow performance
- Deep, powerful sound outside the truck with a moderate, livable tone inside the cab
- Finished with a large 4.50-inch black ceramic coated tip embossed with the Flowmaster name
- CARB (California) compliant with Emission Code 5 for street-legal confidence
- Bolts to factory hanger locations and includes all hardware and instructions for easy at-home install
- Fits 5.7L Hemi Ram 2500/3500 and 1500 Mega Cab across all 2WD/4WD setups and wheelbases
-
- Deep, powerful tone from straight-through Flow FX mufflers while staying at a moderate, street-friendly sound level
- Bolt-on installation using factory hanger locations—no cutting or custom fabrication needed
- Built to last with bright 409S stainless steel mufflers and 3.00-inch mandrel-bent stainless tubing
- Bold dual 4.50-inch black ceramic-coated stainless tips with embossed logo that fill the factory cutouts
- CARB (California) compliant fitment for 2011-2012 Mustang GT 5.0L and 2012 Boss 302
- Includes all necessary parts, hardware, and detailed instructions for a complete upgrade
-
- Adds a dyno-verified 16 hp and 23 lb-ft of torque at the rear wheels over stock
- 3.00-inch mandrel bent 409 stainless steel tubing for maximum flow and lasting durability
- Aggressive to moderate Flow FX muffler tone that gives your TITAN a bold voice
- Turndown dump exit improves ground clearance and departure angle for off-road driving
- Uses factory hangers and includes all hardware for an easy bolt-on install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of 13 hp and 14 lb-ft at the rear wheels from a true cat-back performance exhaust
- Durable 409 stainless steel with 3.00-inch mandrel-bent pipe for improved exhaust gas flow
- Flow FX straight-through muffler delivers a moderate/mild tone without cabin drone
- 4.50-inch black ceramic coated side-exit tip with embossed logo for aggressive style
- Bolts on using factory hanger locations with included hardware and instructions for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back exhaust system built specifically for the 22-26 Toyota Tundra 3.4L
- 409 stainless steel with 3.0-inch mandrel-bent pipes for improved flow and durability
- Straight-through Flow FX muffler delivers an aggressive-to-moderate sound inside and out
- Under-truck dump-style turn-down tip adds style and better off-road ground clearance
- Bolts on using factory hangers with all hardware and instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 20 hp and 25 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel with 3.00-inch mandrel-bent tubing for better exhaust flow
- Aggressive-to-moderate European note with Helmholtz resonators to reduce interior drone
- Dual 3.50-inch black stainless tips with embossed logo for a custom look
- Bolts to factory hangers with all hardware and instructions included for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains up to 5 hp and 5 lb-ft of torque at the rear wheels over stock
- 409 stainless steel with 2.50 and 3.00-inch mandrel-bent tubing for maximum flow and durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Deep, powerful Flow FX muffler tone with an aggressive-to-moderate sound level
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 25–48 of 122 results
