Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
FASS Fuel Systems 
Flowmaster 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Mishimoto 45-Degree Black Silicone Transition Coupler - Air Intake
$43.95
-
JLT RAI2-FMC-9901 Ram Air Intake Kit 1999, 2001 SVT Mustang Cobra No Tuning Required
$399.00
-
FASS Titanium/Titanium Signature Series Dual Electric Heater Kit Splitter
$43.86
-
Mishimoto High-Torque Worm Gear Clamp, 72-95mm, Stainless Steel Gold
$7.95
-
BladeRunner 3 IN Aluminum Hot Charge Pipe Black Ford F-150/Raptor 21-22 V6-3.5L (tt)
$545.00
Image
Product
Price
-
- Purpose-built for Chevrolet and GMC 6.6 diesel trucks with performance tunes ready to load
- Color display with speedometer and in-cab monitoring keeps engine data front and center
- Accepts custom tunes from CMR for calibrations tailored to your goals
- Wi-Fi updates, video-capable operation, and 5-volt data logging inputs for expanded monitoring
- Pods and mounts available separately to customize your in-cab install
Quickview
-
- Performance tunes for Chevrolet and GMC 6.6 diesel trucks, with no laptop required to get running
- Doubles as an in-cab monitor with a color, video-capable display for live engine data
- Accepts custom tunes from CMR so you can go beyond the preloaded programming
- Wi-Fi updates and 5-volt data logging inputs keep the device current and expandable
- Built-in speedometer calibration corrects readings after tire and gearing changes
- Pods and mounts available for a clean, tailored in-cab installation
Quickview
-
- Engineered for Chevrolet and GMC 5.3 and 6.2 gasoline engines with ready-to-run performance tunes
- Full in-cab monitoring on a color touch screen display, including speedometer and video capability
- Accepts custom tunes from CMR for personalized calibration beyond the preloaded programming
- 5-volt data logging inputs for capturing and tracking additional sensor data
- Wi-Fi updates and expandable accessory system compatibility, with pods and mounts available
Quickview
-
- Edge Products control module built for the Ignition category and trusted performance monitoring setups
- Works with both Diesel and Gas fuel types for wide vehicle coverage
- Adaptor lets the CTS, CTS2, CTS3, Dashpaq+, TrailDash 3, and Trinity 2 fit existing dash pods
- Backed by Holley Tuning’s range of custom dash mounts for various makes and models
- Delivers a clean, integrated dash-mounted look with improved display visibility
Quickview
-
- Delivers performance tunes plus real-time in-cab monitoring for gasoline 6.6 Chevrolet and GMC engines
- Full-color touch screen display that’s video capable for clear, easy navigation and readouts
- Built-in Wi-Fi updates keep the device’s software current without extra hardware
- Accepts custom tunes from CMR and supports an expandable accessory system with available pods and mounts
- Speedometer function and 5-volt data logging inputs for dialing in and capturing engine data
- Reversible flash back to factory settings, giving you flexibility after tuning
Quickview
-
- State-of-the-art swivel system lets you adjust your Edge monitor to the optimal viewing angle
- Universal 2-1/16″ design mounts your display cleanly in a standard gauge pillar pod
- Wide compatibility with Edge CS/CS2, CTS/CTS2, T2, CTS3, and DashPaq+ monitors
- Ideal for replacing existing gauges with a modern Edge color display
- Delivers a clean, finished, integrated look inside your cab
Quickview
-
- Splits a single OBD-II port into two, so you can run your tuner or monitor and another accessory at the same time
- Works with Edge, DiabloSport, and Superchips OBD-II devices for flexible compatibility
- High quality construction ensures proper data transfer speed and reliable device performance
- Suitable for both Diesel and Gas vehicles as an Engine Service upgrade
- Eliminates the need to unplug and swap devices from your factory OBD-II port
Quickview
-
- Converts the older RCA camera input into a USB input required by the CTS3 monitor
- Ideal for customers upgrading from a CTS or CTS2 monitor to the CTS3
- Lets your existing cameras keep working with CTS3 products instead of buying new hardware
- Universal cable length for a flexible, straightforward connection
- Genuine Edge Products component in the Tuners and Programmers category
Quickview
-
- Genuine Edge Products replacement cable connecting OBDII to HDMI
- Compatible with CS2, CTS2, CTS3, Trinity 2, and TrailDash 3 monitors
- Restores the data link for real-time gauges, monitoring, and diagnostics
- Correct-fit fix for damaged, worn, or missing connector cables
- Purpose-built by Edge for a reliable, brand-matched connection
Quickview
-
- Repairs all four sliders in both factory L5P Duramax ECM connectors instead of replacing the entire harness
- Quick, in-vehicle fix that can be completed in a matter of minutes
- No ECM reprogramming required
- Step-by-step installation video available to guide the repair
- OE replacement, GM-specific design from Edge Products
Quickview
-
- Windshield suction cup replacement mount for a secure, no-drill install
- Compatible with Superchips TrailDash2/TrailDash3, Dashpaq/Dashpaq+, DiabloSport Trinity/MX, and Edge CS2/CTS2/CTS3
- Universal application for flexible vehicle fitment
- Repositionable design keeps your monitor at the ideal viewing angle
- Ideal as a direct replacement or a handy spare mount
Quickview
-
- Works seamlessly with your existing Edge monitor for an OEM-like back-up experience
- Adjustable design lets you set the ideal rear viewing angle
- Durable stamped steel construction with a clean black finish
- Universal fit for flexible application across setups
- Part of the EAS Back-Up Camera Kit, backed by Edge Products’ 20+ years of innovation
Quickview
-
- Automates the turbo cool-down period to help prevent premature turbocharger wear and failure
- Runs the engine for a set time or until a target temperature is reached, keeping oil circulating to protect the turbine
- Built on the expandable Edge Accessory System (EAS) and daisy-chains with other accessories on CS and CTS platforms
- Universal part # 98604 fits all diesel engines except the 2006-2012 Dodge Cummins, which uses dedicated part # 98612
- Works with the Edge CS and CTS product lines and requires an EAS Starter kit for installation
Quickview
-
- Daisy-chain multiple accessories into one device with the Expandable Accessory System (EAS)
- Monitor and display dozens of parameters on a single screen
- Built with future expandability in mind so your setup can grow over time
- Color Display support delivers clear, easy-to-read parameter readouts
- Designed to work with the Superchips TrailDash and Dashpaq (requires EAS Starter Kit #98602)
Quickview
-
- Reads any 0-5 volt signal and translates it into a meaningful value displayed right on your Edge monitor
- Dual A and B inputs let you monitor two different sensors at the same time
- Includes the EAS Daisy Chain connector plus two separate wiring harnesses for installation
- Built for diesel applications and part of the trusted Edge Products EAS lineup
- Expands your monitoring setup — pair with the EAS Starter Kit cable (pn 98602) to connect
Quickview
-
- Genuine Edge Products EAS component for expanding your Edge tuning and monitoring setup
- Expandable Accessory System design lets you scale capability over time instead of replacing your device
- Built for gas-fuel-type applications with an Emission Code of 6
- Compact and lightweight at 9.5″ x 6.25″ x 1.5″ and just 2 lbs for easy integration
- Works within the EAS ecosystem — requires EAS Starter Kit (part #98602) and a compatible Dashpaq platform
Quickview
-
- Integrates with the EAS Power Switch to connect and digitally control your accessories
- Operate lights, lockers, or other accessories through the TrailDash’s interactive display
- Touch-of-a-button control keeps your accessory management simple and centralized
- Diesel-specific Edge Products component from the Tuners and Programmers category
- Expands your existing Edge EAS setup for a cleaner, more cohesive build
Quickview
-
- Genuine Edge Products accessory connector built for Dodge and Ram 5.9 and 6.7 trucks
- Part of the Edge Accessory System (EAS) for clean, modular electronics expansion
- Enables turbo timer functionality when paired with the EAS Starter Kit (PN 98602)
- Slots right in if you already run a Juice w/Attitude system or EGT Probe kit with the start cable
- Compact, lightweight design at roughly 9.5 x 6.25 x 1.5 in and 2 lb
Quickview
-
- Powers two 12V products — like auxiliary lighting or an onboard compressor — directly from your Edge monitor
- Part of the Edge Expandable Accessory System (EAS) for clean, integrated control
- Reduces dash clutter by centralizing accessory switching through your existing display
- Compact and lightweight at just 2 lbs (6.25″ x 1.5″ x 9.5″) for easy mounting
- Purpose-built Edge Products Electrical Connector designed for gas applications
Quickview
-
- Genuine Edge Products accessory component for a clean, integrated setup
- Expandable design lets you scale your Edge system as your needs grow
- Compatible with the EAS -40F to 300F temperature sensor for wide-range monitoring
- Compact and lightweight at just 1.5 lbs for flexible routing and mounting
- Spec’d for gas applications within the Tuners and Programmers category
Quickview
-
- Reads boost beyond the stock MAP sensor’s limits — ideal for aftermarket turbo builds
- Wide 0-100 PSI range for accurate high-boost monitoring
- Configures quickly through MyStyle for guided setup
- Versatile enough to serve as a drive pressure or fuel pressure sensor
- Backed by Edge Products and its EAS accessory ecosystem
Quickview
-
- Connects your Edge Revolver 6-position chip to the Insight CTS3 for integrated control
- Adjust power on-the-fly directly from the CTS3’s power level screen
- Replaces the dash-mounted rotary knob for a cleaner interior setup
- Purpose-built for Ford 7.3 diesel applications
- 9.5 length cable from a trusted name in diesel tuning, Edge Products
Quickview
-
- Adds real-time Exhaust Gas Temperature monitoring right on your Edge device’s color-capable display
- Complete kit includes the manifold fitting, probe, wiring, and EAS starter cable
- External probe installs in the exhaust manifold for the most accurate EGT readings
- Edge Products’ most popular EAS accessory, trusted by everyday diesel truck owners
- Compact and lightweight at just 1 lb, making it easy to add to your existing setup
Quickview
-
- Adds accurate, real-time EGT monitoring so you can spot rising exhaust gas temperature before it becomes a problem
- Pairs directly with the CTS3 tuner or monitor, turning your display into a full exhaust gas temp gauge
- Part of the Edge EAS expandable accessory system for clean, integrated installation
- Backed by Edge Products’ 20+ years of diesel performance innovation for reliability and precision
- Includes the EGT probe you need to capture exhaust temperature readings right out of the box
Quickview
Showing 2545–2568 of 15427 results
