Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Dinan DINANTRONICS Performance Tuner Stage 2 - 2012-2019 BMW M5/M6
$2,853.95
-
aFe Power AFE-51-76301-p Momentum Cold Air Intake System BMW M5 (F10) / M6 (F06/12/13) 12-19 V8-4.4L (t) S63
Price range: $734.00 through $761.00
-
2019 Dodge Challenger (6.2) Computer Chip Programmer
$2,608.15
-
BBK FORD GT-40/COBRA INTAKE MANIFOLD UPPER-LOWER GASKET KIT (2)
$29.99 $34.99 -
AIRAID SPECIAL ORDER Univ Fltr- 700-463
$99.99
Image
Product
Price
-
- Deep, aggressive exhaust note powered by the Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle for off-road driving
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2003-2024 Toyota 4Runner 4.0L
-
- Aggressive Super 10 Series sound loud inside and out, backed by real Flowmaster performance
- Two selectable tailpipe exits — under-bumper or behind the rear wheels for towing flexibility
- All mandrel-bent 409 stainless 3.00-inch tubing with dual 4.00-inch black ceramic coated tips
- CARB compliant and emissions-legal for street use where required
- Easy bolt-on install using factory hangers with all hardware included
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep exhaust tone powered by the proven Flowmaster Outlaw series muffler
- Max dyno gains of 15 hp and 20 lb-ft at the rear wheels on the 5.3L Silverado/Sierra 1500
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- One of Flowmaster’s most aggressive tones from the Super 10 Series muffler — loud inside and out
- Mandrel-bent 409 stainless steel 3.00-inch tubing and dual tailpipes for lasting performance and flow
- Two included tailpipe exit configurations: straight under the bumper or behind the rear wheels for towing
- Large 4.00-inch black ceramic-coated stainless steel tips with embossed logo
- CARB compliant and emissions-legal, with a bolt-on fit using factory hangers and included hardware
- Fits 2021-2026 Ford F-150 2.7L, 3.5L, and 5.0L in 2WD or 4WD, backed by a Lifetime Limited Warranty
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Aggressive Outlaw-series tone that gives your Bronco a bold, unmistakable voice
- Dyno-proven gains of up to 14 hp and 16 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom rear-end look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the loudest, most aggressive sound in Flowmaster’s Super series lineup via a single chamber design
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Patented Delta Flow® technology engineered for maximum performance
- 2.50-inch inlet with universal fitment for Plymouth 225 through 440 muscle car builds
- High-temperature paint finish stands up to the heat
- Ideal off-highway upgrade for enthusiasts building an aggressive performance exhaust
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, highest-performing street tone in a four-inch case
- 16-gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50-inch inlet, ideal for late-model muscle car and custom builds
- Compact 9.50-inch body width with a protective high-temperature paint finish
- Rich, powerful, aggressive sound level tuned for the street
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-verified gains of 6 hp and 7 lb-ft at the rear wheels with an aggressive Outlaw exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability while supporting future engine upgrades
- Over-axle routing gains 2.0 inches of axle clearance for better suspension travel on modified, off-road Broncos
- Dual 4.00-inch black chrome tips with embossed logo add a custom look to the 2021-2026 Ford Bronco 4-door
- Includes new hangers and all necessary hardware, using factory mounting locations for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delta Flow® two-chamber design with Delta deflectors boosts scavenging for better performance and reduced interior sound
- Milder exterior tone and less interior resonance than the standard 40 Series, while keeping an aggressive note
- Rugged 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability
- 3.00″ inlet with dual outlet configuration for strong exhaust flow
- Universal fitment covers Chevrolet, Ford, and GMC 305, 350, 351, and 460 applications
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delivers the iconic aggressive Flowmaster tone inside and out
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with 2.50″ dual inlet and dual outlet for flexible builds
- Ideal aggressive muffler for street rod and custom exhaust systems
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Dyno-proven maximum gains of 6 hp and 7 lb-ft at the rear wheels
- Aggressive Outlaw-series muffler delivers a bold, deep exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 9 hp and 9 lb-ft at the rear wheels over the stock exhaust
- Aggressive Outlaw series sound, heard both inside and outside the truck
- Dual tailpipes configure straight-rear or side-exit — ideal for towing
- Includes stainless Outlaw muffler and polished 4.00-inch embossed tips
- CARB-compliant, emissions-legal bolt-on using factory hangers
- 409 stainless mandrel-bent piping backed by a Lifetime Limited Warranty
-
- Delivers the deep, powerful sound of the Original 40 Series with reduced interior resonance thanks to Delta Flow® technology
- Larger case profile shines on forced induction and high-horsepower vehicles, balancing performance and sound
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Race-derived Super 40 Series design engineered from Flowmaster’s Top Ten race muffler lineup
- Universal fitment with a 2.50-inch inlet makes it ideal for street rod and custom exhaust builds
-
- Deep, aggressive Outlaw series sound with increased performance over the restrictive factory exhaust
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Direct-fit design uses factory hangers and includes all hardware for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delta Flow® two-chamber design with Delta deflectors for increased scavenging and improved performance
- Aggressive exhaust tone with reduced interior resonance and drone
- Milder exterior tone than the standard 40 Series for a more livable daily setup
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 2.50-inch inlet fitment for flexible custom and replacement builds
- High-temperature paint finish for lasting protection against heat and the elements
-
- Delta Flow® technology delivers deep, powerful sound with low interior resonance
- Larger case profile excels on forced-induction and high-horsepower vehicles
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal 3.00″ inlet fitment makes it a versatile building block for any exhaust system
- Race-derived Super 40 Series tuned for aggressive late-model muscle car sound
-
- Flowmaster Super 40® with Delta Flow® technology delivers an aggressive, deep tone with low interior resonance
- Developed from Flowmaster’s Top Ten race muffler lineup for street and strip performance
- Larger case profile shines on forced induction and high horsepower vehicles
- Built tough from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal 3.00″ inlet fitment makes it ideal for late-model muscle car exhaust builds
- High-temperature paint finish helps stand up to heat and the elements
Showing 217–240 of 278 results
