Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Performance Air Intake System- 522-152
$349.99
-
Injen IS Short Ram Cold Air Intake System - IS1650 INJ-IS1650
$256.49
-
Injen Technology SuperNano-Web Air Filter - X-1063-BB INJ-X-1063-BB
$84.66
-
Flowmaster Force II Cat-back Exhaust System
$1,031.90
-
aFe Power AFE-50-70046D-p Momentum GT Cold Air Intake System Suzuki Jimny 19-22 L4-1.5L
Price range: $408.87 through $421.58
Image
Product
Price
-
- Delivers the loudest, most aggressive sound in the Flowmaster Super series thanks to its single chamber design
- Patented Delta Flow® technology maximizes performance flow
- Built from 16 gauge 409S stainless steel and fully MIG welded for lasting durability
- 3.00″ inlet with universal fitment for flexible late-model muscle car builds
- Purpose-built for off-highway use where maximum attitude matters
-
- Flowmaster Delta Flow® two-chamber design boosts scavenging for better performance
- Delta deflectors reduce interior sound and resonance while keeping an aggressive tone
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- 2.25″ inlet with universal fitment for flexible custom exhaust builds
- High-temperature paint finish stands up to the heat of a hard-working exhaust
- Ideal centerpiece for classic muscle car catback and cat back muffler systems
-
- Delivers Flowmaster’s most aggressive, highest-performing four-inch-case street sound with a rich, powerful tone
- Proven Delta Flow® technology carried over from the larger Super 40 mufflers
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- High-temperature paint finish stands up to real-world exhaust heat
- Universal 2.50″ inlet design ideal for custom Truck/SUV exhaust builds
-
- Delta Flow® technology balances strong performance with a deep, aggressive tone and low interior resonance
- Larger case profile is especially effective on forced induction and high horsepower vehicles
- 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability
- Race-derived design from Flowmaster’s Top Ten lineup, built for street and strip use
- Universal fitment offers flexible installation across late model muscle car builds
-
- Flowmaster Super 44 Series muffler delivers an aggressive, throaty sound level
- Direct-fit design for the 2016-2024 Chevrolet Camaro in 2.0, 3.6, and 6.2 configurations
- High-temperature paint finish helps resist exhaust heat for lasting durability
- 2.50-inch side inlet with a 9.50-inch body width, engineered for late model muscle cars
- Doubles as a universal 90-degree side inlet, center outlet muffler for custom builds
- Exhaust tips sold separately so you can customize the finishing touch
-
- Dyno-proven gains up to 12 hp and 13 lb-ft at the rear wheels
- Aggressive Outlaw-series exhaust tone from a straight-pipe design
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow
- Tip tucked higher for a better off-road departure angle
- CARB compliant and street-legal in California
- Includes new hangers and hardware for easy bolt-on installation, backed by Flowmaster’s Lifetime Limited Warranty
-
- Patented Delta Flow technology delivers maximum performance and the deep, aggressive tone the Super series is known for
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Single chamber Super 10 design produces the loudest, most aggressive sound in the Super lineup
- Universal fitment with a 2.50″ inlet makes it a flexible choice for late model muscle car builds
- High-temperature paint finish adds extra protection against heat and the elements
- Ideal off-highway centerpiece for a custom cat back exhaust system (hangers and tips sold separately)
-
- Delivers Flowmaster’s most aggressive, highest-performing street sound ever built into a compact four-inch case
- Delta Flow® technology carried over from the larger Super 40 for a rich, powerful tone
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal fit with a 3.00-inch inlet and 9.50-inch body — flexible for custom and replacement builds
- High-temperature paint finish stands up to demanding exhaust heat
- Ideal for late-model muscle car owners chasing an aggressive exhaust note
-
- Delta Flow® technology balances strong performance with an aggressive, deep exhaust tone
- Larger case profile delivers a deeper sound than the Original 40 Series with low interior resonance
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal fitment with a 3.00″ inlet and dual outlet location for flexible installation
- Purpose-built for Street/Strip vehicles that demand both power and sound
-
- Delta Flow® two-chamber design uses Delta deflectors for increased scavenging and better performance
- Milder exterior tone with reduced interior resonance compared to the standard 40 Series
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Aggressive sound level tuned for late model muscle car builds
- Universal fit with a 3.00″ inlet diameter for flexible exhaust system installs
- High-temperature paint finish for added protection against heat and the elements
-
- Single-chamber Super 10 design delivers Flowmaster’s loudest, most aggressive sound
- Patented Delta Flow® technology engineered for maximum performance
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet for flexible custom exhaust builds
- High-temperature paint finish stands up to demanding heat
- Purpose-built for late-model muscle cars and off-highway performance use
-
- Delta Flow® technology with Delta deflectors boosts scavenging for better performance and reduced interior sound
- Aggressive Flowmaster tone with a milder exterior note and less cabin resonance than the standard 40 Series
- Built tough from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Universal 2.50″ inlet design makes it a flexible fit for custom and replacement exhaust builds
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delta Flow® technology delivers a rich, powerful, and aggressive tone in a compact four-inch case
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to heat and the elements
- Universal fitment makes it ideal for street rod and custom performance builds
- 9.50-inch body width with a 2.50-inch inlet for a versatile, performance-focused design
-
- Delta Flow® technology delivers performance and an aggressive, deep exhaust note in one muffler
- Larger case profile excels on forced induction and high-horsepower vehicles
- 16 gauge 409S stainless steel, fully MIG welded for maximum durability
- Low interior resonance means the powerful sound stays outside, not droning in the cabin
- Universal fit with a 3.50″ inlet for flexible custom exhaust builds
- Race-derived design from Flowmaster’s Top Ten muffler lineup, built for street/strip use
-
- Delta Flow® technology with Delta deflectors increases scavenging for better performance
- Aggressive tone outside with reduced interior resonance for a more livable cabin
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- Universal fitment with a 2.00-inch inlet for flexible exhaust builds
- High-temperature paint finish stands up to exhaust heat
- Purpose-built for street/strip driving
-
- Crossflow design purpose-built for transverse muffler mounting behind the rear end
- Delivers an aggressive muscle car sound inside and outside the vehicle
- Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- Excellent replacement for Camaros and Firebirds with transverse mufflers
- 2.50-inch inlet with dual transverse outlets and a heat-resistant high-temperature paint finish
-
- Flowmaster 40 Series Delta Force race muffler with an aggressive sound level for competition builds
- Strategically placed internal ‘burn holes’ help prevent methanol puddling and deceleration backfire damage on alcohol-fueled race engines
- Developed through partnerships with sanctioning bodies including NASCAR, ARCA, and the W.O.O. sprint car series
- 3.50″ inlet with an offset (same-side) outlet for compact, packaging-friendly race layouts
- Durable high-temperature paint finish built to handle demanding track conditions
- Universal fitment for flexible integration into custom race exhaust setups
-
- Delta Flow® deflector technology increases scavenging for better performance
- Aggressive tone with milder exterior sound and reduced interior resonance versus the standard 40 Series
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- Universal fitment with a 2.00″ inlet for versatile installation
- High-temperature paint finish built to handle exhaust heat
-
- Delta Flow technology delivers strong power characteristics with good sound control
- Aggressive tone tuned for street/strip driving and strict-decibel race applications
- Low-profile 3-inch case fits lowered vehicles where taller mufflers won’t
- Universal fitment with a 2.50-inch inlet for flexible exhaust builds
- Durable high-temperature paint finish stands up to exhaust heat
- Race-bred 50 Series Delta Force construction from Flowmaster
-
- Delivers Flowmaster’s loudest, most aggressive Super 10 Series sound for off-highway builds
- 16 gauge 409S stainless steel construction, fully MIG welded for maximum durability
- Patented Delta Flow technology engineered for maximum performance
- Universal fit with 2.50-inch dual inlet and dual outlet for flexible custom exhaust setups
- High-temperature paint finish built to handle hard-driven use
- Ideal foundation for late model muscle car and custom cat back exhaust projects
-
- Delta Flow® technology delivers a rich, powerful, and aggressive tone in a compact four-inch case
- Built from 16 gauge 409S stainless steel and fully MIG welded for maximum durability
- The most aggressive, highest-performing street muffler Flowmaster has built in a four-inch case
- Universal fitment with a 2.50-inch dual inlet, ideal for Truck/SUV exhaust builds
- High-temperature paint finish adds extra protection against heat and the elements
-
- Delta Flow® technology delivers both improved performance and an aggressive, powerful sound
- Larger case profile produces a deeper tone than the Original 40 Series with low interior resonance
- Durable 16 gauge 409S stainless steel construction, fully MIG welded for maximum longevity
- Universal fit with 2.50″ inlet and dual inlet/outlet locations — ideal for late model muscle cars
- Aggressive sound level tuned to command attention on the street
-
- Delta Flow® technology with Delta deflectors boosts scavenging for better performance and reduced interior sound
- Aggressive exterior tone with less interior resonance than the standard 40 Series for comfortable daily driving
- Heavy-duty 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to real exhaust heat
- Universal fit with a 2.25″ inlet for flexible Street/Strip exhaust builds
-
- Delivers a rich, powerful, and aggressive exhaust tone from Flowmaster’s proven Delta Flow® technology
- One of the most aggressive, highest-performing street mufflers Flowmaster builds in a compact four-inch case
- Constructed from durable 16-gauge 409S stainless steel and fully MIG welded for maximum longevity
- Universal fit with dual inlet / dual outlet design and a 2.50-inch inlet for flexible installation
- High-temperature paint finish adds extra protection against the heat of hard street driving
- A perfect match for late model muscle cars looking to make a bold statement
Showing 241–264 of 278 results
