Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
2016 Dodge Charger (5.7, 6.4) Computer Chip Programmer
$2,041.15
-
Mishimoto MMTMIC-WRX-01SLRD Top-Mount Intercooler Kit
$776.95
-
23-26 Toyota GR Corolla (1.6) Exhaust System Kit
$1,593.35
-
Dinan Intercooler Fascia Hardware Kit - 2012-2016 BMW 3-Series
$62.95
-
AIRAID Junior Air Intake System- 201-763
$349.99
Image
Product
Price
-
- Aggressive interior and exterior sound from race-inspired Outlaw series mufflers
- Direct fit for 2015-2016 Charger R/T and 2015-2023 Chrysler 300 with the 5.7L Hemi
- Exclusive 2.50-inch Scavenger Series X-pipe delivers a deep, unique tone
- Durable 409S stainless steel mandrel-bent tubing with dual 2.50-inch stainless tips
- Bolt-on install using factory hangers, with all parts, hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Constant, aggressive wide-open sound thanks to Outlaw Series mufflers and the Scavenger Series X-pipe
- Dummy valve stands keep your factory actuators happy — no check-engine codes after removing the OE valves
- Dual 3.00-inch mandrel-bent stainless tubing and quad 3.50-inch embossed 304 stainless tips for flow and looks
- Direct fitment for 6.4L SRT 392 / Scat Pack, 6.2L Hellcat, and 5.7L R/T Challengers
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all parts and hardware for an easy at-home installation
-
- Aggressive Track-mode roar with a deep, mellow everyday tone thanks to tandem 40 Series Delta Flow and dual Outlaw mufflers
- Functional exhaust valves work with your O.E. actuator motors to select between sound levels on demand
- Large quad 4.00-inch polished stainless steel tips replicate the factory NPP quad-tip look
- Full stainless steel construction backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2016-2024 Camaro SS & ZL1 6.2L coupe and convertible with factory NPP option, using factory hangers for an easy install
- CARB compliant and includes all necessary parts and hardware
-
- Aggressive muscle car sound both inside and outside the vehicle from Flowmaster’s chambered cross-flow design
- Same-end inlet and offset outlet route cleanly in front of the axle for a side-exit style system
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to exhaust heat
- Universal fitment with a 2.50-inch inlet for flexible custom and replacement builds
- Delivers a classic layout similar to AAR Cuda exhaust systems
-
- Delivers aggressive interior and exterior sound levels from your 5.7L Hemi with race-inspired Outlaw Series mufflers
- Dual 2.50-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe maximize flow, performance and tone
- Finished with 4.00-inch black ceramic coated stainless steel tips and embossed Flowmaster logos for a bold look
- Bolt-on install using factory hangers, with all necessary parts, hardware and instructions included
- CARB (California) compliant and fits 2005-2010 Charger R/T, Magnum R/T and 300C, including all-wheel drive models
-
- Aggressive Outlaw Series tone inside and out for the 2018-2023 Mustang GT 5.0L
- Dual 3.00-inch stainless steel mandrel-bent tubing with exclusive Scavenger Series X-pipe for maximum flow and power
- Improved throttle response, power, and mileage from a proven Flowmaster design
- Quad 4.00-inch carbon fiber tips with printed logo for a modern, premium look
- Easy bolt-on install using factory hangers with all hardware and instructions included
- Emissions-legal and CARB (California) compliant for street-legal performance
-
- Aggressive exterior sound under throttle with a moderate tone when cruising
- Dual 3.00-inch mandrel-bent stainless tubing and Scavenger Series X-pipe for deep sound and maximum power
- Active exhaust valve tailpipes ready to reuse your factory actuators
- Quad 3.50-inch 304 stainless embossed tips for a muscular look
- Bolts to factory hangers with all parts and hardware for easy at-home installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven max gains of 13 hp and 12 lb-ft at the rear wheels for power you can feel
- Built from 409 stainless steel muffler body and piping for long-lasting, corrosion-resistant service
- Aggressive American Thunder sound from the oval Super 40-based, dual-out rear muffler
- Direct-fit design uses factory hangers and connections for an easy at-home install
- Includes flat band clamps and all necessary hardware; fits both 2WD and 4WD models
- 3.00-inch inlet and outlet with dual in/dual out configuration for improved flow
-
- Aggressive Outlaw Series sound inside and out, built for the 2017-2023 Charger R/T and Daytona 5.7L Hemi
- Dual 3.00-inch mandrel bent 409S stainless tubing with an exclusive Scavenger Series X-pipe for maximum flow and a deep tone
- Active Exhaust Valves pair with your factory actuators, keeping OEM-style on-demand sound control
- Dual 3.00-inch tailpipes exit in the stock location through the factory exhaust bezels for a clean, OEM-style look
- Bolt-on install using factory hangers with all hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Purpose-built for 2015-2017 Ford Mustang GT 5.0L coupes and convertibles
- Race-proven dual Outlaw mufflers deliver an aggressive exterior sound with a noticeable interior tone
- All stainless steel mandrel-bent 3.00-inch tubing for smooth flow and lasting durability
- Bold dual 4.00-inch black ceramic coated tips with embossed logo
- Mounts to factory hangers with all hardware and instructions included for an easy install
- CARB compliant and backed by a Lifetime Limited Warranty
-
- Purpose-built for 2013-2018 Ford Focus ST models with the 2.0L turbocharged engine
- Aggressive interior and exterior sound level for drivers who want to be noticed
- 3.00-inch mandrel-bent stainless steel tubing and a tuned resonator for maximum flow and sound
- Scavenger Y-collector into dual 2.50-inch tailpipes with 4.00-inch carbon fiber tips through the factory cutouts
- Bolts up using all factory hanger locations with all hardware and detailed instructions for easy at-home install
- CARB (California) compliant
-
- Purpose-built for 2018-2023 Ford Mustang GT 5.0L coupes and convertibles (non-active-valve exhaust)
- Race-proven Outlaw Series mufflers deliver an aggressive exterior sound with noticeable interior tone
- Quad 4.00-inch black ceramic-coated tips with embossed logo add an aggressive, head-turning look
- 3.00-inch mandrel-bent 409S stainless steel tubing for optimized flow and lasting durability
- Installs easily using factory hanger locations and retains the factory resonator mid-pipe
- CARB compliant and ships complete with all parts, hardware, and installation instructions
-
- Deep, aggressive tone from Flowmaster’s Outlaw series muffler with 3.0-inch mandrel-bent tubing for increased performance
- Durable 409 stainless steel construction stands up to heat, debris, and the elements
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts on using factory hanger locations with all necessary hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive interior and exterior sound thanks to race-proven Outlaw Series mufflers and a Scavenger X-pipe
- Dual 3.00-inch 409S stainless steel mandrel-bent tubing flows hard for real performance
- Bolt-on install uses factory hanger locations and includes all hardware plus instructions
- Polished 4.00-inch stainless tips with embossed logo exit cleanly through the factory cutouts
- Retains factory active exhaust functionality by reusing your OEM valve actuator
- CARB (California) compliant for emissions-conscious enthusiasts
-
- Direct-fit replacement for 2019-2024 and 2026 RAM 1500 new body style trucks with the 5.7L Hemi
- Race-proven Outlaw muffler delivers a deep, aggressive interior and exterior tone
- Full 409 stainless steel construction with mandrel-bent tubing for durability and flow
- Installs in under 30 minutes using factory hanger locations, with easy-to-follow instructions included
- Fits all 2/4 wheel drives and wheelbases with either factory single or dual tailpipes
- 3.00-inch inlet, outlet, and main piping for maximum performance without losing Hemi power
-
- Delivers an aggressive exterior sound level with a noticeable interior tone from race-proven Outlaw series mufflers
- Finished with dual 4.00-inch black ceramic coated stainless steel tips featuring an embossed logo for a bold look
- Uses the factory hangers for a quick, bolt-on installation with all parts, hardware, and instructions included
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
- Fits both 2015-2023 Mustang coupes and convertibles with the 2.3L EcoBoost or 3.7L engine
-
- Vehicle-specific fit for 2018-2023 Ford Mustang GT coupe and convertible with the 5.0L engine
- Race-proven Outlaw mufflers deliver an aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing with quad 4.00-inch polished stainless tips
- Uses factory hanger locations for an easy at-home install in about an hour
- CARB (California) compliant and includes all necessary hardware and instructions
- Exits through factory rear valance cutouts and retains the factory resonator mid-pipe
-
- Loud, aggressive Super 10™ Series stainless muffler for maximum sound inside and out
- Full 3.00-inch mandrel-bent stainless tubing and dual tailpipes for max airflow and power
- Bolt-on install using factory hangers, with all hardware and instructions included
- Choose dual rear exit or dual side exit — side exit keeps exhaust off your trailer when towing
- Finished with 4.00-inch double-wall black ceramic-coated tips featuring an embossed logo
- Emissions-legal and CARB compliant with dyno gains up to 10 hp and 13 lb.-ft. at the wheels
-
- Delivers the deep, aggressive Outlaw Extreme sound inside and outside the truck
- Race-proven 3.00-inch Outlaw muffler with a single dump-style turndown exit under the bed
- Durable 409 stainless steel construction built to resist heat and corrosion
- Bolts on to factory hangers with included hardware and instructions in under an hour
- CARB (California) compliant for legal use where emissions rules apply
- Fits 2014-2019 Silverado/Sierra 1500 with 4.3L or 5.3L, 2WD and 4WD
-
- Delivers the ultimate aggressive exhaust note both inside and outside the cab with a 3.00-inch race-proven Outlaw muffler
- Built from durable 409 stainless steel for long-lasting strength against heat and the elements
- Bolt-on installation uses factory hanger locations plus all included hardware and detailed instructions
- Mandrel-bent single dump-style turndown exits under the bed for a deep, aggressive tone
- CARB (California) compliant and fits all 2015-2020 F-150 2WD/4WD models and wheelbases with 2.7L/3.3L/3.5L EcoBoost, 3.5L Ti-VCT, and 5.0L engines
-
- Deep, moderately aggressive exterior sound with a moderate interior tone thanks to the Super 44 Series muffler
- Mandrel-bent stainless steel with 3.00-inch inlet and 2.50-inch dual tailpipes for strong flow and a muscular exit
- Bolt-on install using factory hanger locations, with all parts, hardware and detailed instructions included
- Dual tailpipes routed to clear the factory spare tire and exit behind the rear wheels
- 3.50-inch polished 304 stainless tips embossed with the Flowmaster logo
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty for 2020-2026 Jeep Gladiator 3.6L
-
- Delivers maximum dyno gains of 15 hp and 16 lb-ft at the rear wheels by replacing the stock muffler with straight pipe
- High Clearance design tucks the tip higher for a better departure angle and fewer trail hang-ups
- 2.50-inch mandrel-bent 409 stainless steel tubing maximizes flow and long-term durability
- Polished 3.00-inch stainless steel tip with embossed logo adds custom style
- Easy install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the aggressive Outlaw exhaust tone inside and out on 2018-2026 Jeep Wrangler JL 3.6L models
- 2.50-inch mandrel-bent stainless steel tubing promotes free-flowing performance
- Dual 2.5-inch tailpipes with 4.00-inch black ceramic coated stainless steel tips and embossed logo for a modern look
- Tuned front reflection resonator reduces interior drone, with an optional non-resonated pipe for even more aggression
- CARB compliant, emissions-legal, and a bolt-on fit using factory hanger locations with all hardware included
-
- Deep, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2016-2023 Toyota Tacoma 3.5L
Showing 193–216 of 278 results
