Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Mishimoto Performance Cold Air Intake for 2017-2020 Honda Civic Si
$358.95
-
AEM-21-203DOSK DryFlow Air Filter
$83.99
-
Mishimoto Cold Air Intake System – 2021+ BMW G8X M2/M3/M4 S58B30
$866.95
-
aFe Power AFE-46-33024 Silver Bullet Intake Manifold Spacer Kit Ford F-250/F-350 20-22 V8-7.3L
$213.00
-
Magnum FORCE AFE-24-91131-p Intake Replacement Air Filter 6 IN F x 7 IN B x 5-1/2 IN T (Inverted) x 3-7/8 IN H
Price range: $62.00 through $71.00
Image
Product
Price
-
- Muscular exterior sound from the Flowmaster 50 Series Big Block muffler, with a built-in Helmholtz chamber to tame interior resonance
- Large 3.50-inch mandrel-bent stainless steel tubing improves flow for noticeable performance gains
- Bolt-on installation using factory hanger locations makes fitment quick and hassle-free
- Polished 4.00-inch 304 stainless steel tip embossed with the Flowmaster logo for a clean finished look
- CARB compliant and emissions-legal, purpose-built for 2011-2018 Silverado/Sierra 1500 6.2L trucks
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Built from durable 409 stainless steel throughout with 3.00-inch mandrel bent pipes for improved flow and long-term durability
- Outlaw series muffler tuned for a moderate sound level — added attitude without overwhelming the cabin
- Dual 3.50-inch black stainless steel tips with embossed logo deliver a genuine custom look
- Bolts on using factory hanger locations with included instructions and hardware for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-engineered fitment for the 2022-2024 Ford Maverick 2.0L with rear or side exit options
-
- Genuine Flowmaster cat-back designed to improve throttle response, power, and mileage
- 2.25-inch mandrel-bent stainless steel with an inline tuned resonator and included 50 Series Delta Flow muffler
- Single Out Rear design plus a 3.50-inch polished stainless tip for a subtle custom look
- Mild interior tone with a deep, moderate exterior sound — aggressive without being intrusive
- Bolts up to factory hanger locations and includes all parts and hardware for an easy install
- CARB (California) compliant, so it’s street-legal where it counts
-
- Complete crossmember-back kit tuned for a moderate exterior and mild interior exhaust tone
- 50 Series Delta Flow mufflers and a Scavenger X-pipe work together to improve flow and scavenging
- Mandrel-bent 409S stainless pipes reduce restrictions and maximize performance
- Polished 304S stainless 3.00 x 5.50 tips exit through the factory cutout bezels for an integrated look
- Bolt-on fit with all necessary parts and hardware included, plus Flowmaster’s Lifetime Limited Warranty
- CARB (California) compliant for the 1970-1973 Corvette 5.7L V8
-
- Moderate exterior tone from the Super 50 Series muffler with minimal in-cab sound increase
- All stainless steel construction with dual 2.50-inch mandrel-bent tailpipes and a 3.00-inch inlet
- Configurable rear-exit or side-exit routing to suit daily driving or towing
- Finished with large 3.50-inch polished stainless steel tips for a bold rear look
- CARB (California) compliant and includes all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete crossmember-back kit for 1968-1969 Chevrolet Corvette (2WD) with everything needed for a trouble-free install
- Dual 2.50-inch mandrel-bent stainless tubing and Scavenger X-pipe deliver maximum power and a deep, unique tone
- 50 Series Delta Flow mufflers provide a moderate exterior and mild interior sound level
- Highly polished 304 stainless steel tips exit cleanly through the factory cutout bezels
- CARB (California) compliant and backed by the Flowmaster Lifetime Limited Warranty
- Ideal for Big Block applications and high-performance small block engines
-
- Cat-back performance exhaust system with a Signature Series straight-through muffler for a deep, moderate tone
- Brushed 304 stainless steel, TIG welded for durability and a premium finish
- Dyno-proven max gains of 9 hp and 10 lb-ft at the rear wheels
- Large 4.50-inch PVD black chrome 304S stainless steel tip for a custom look
- Uses all factory hangers and connections for an easy at-home install
- CARB (California) compliant and fits 4.3L and 5.3L Silverado/Sierra models
-
- Moderate exterior tone with a mild interior sound—performance without cabin drone
- Stainless steel 80 Series Crossflow muffler and dual 2.50-inch mandrel-bent tailpipes included
- Polished stainless 3.50-inch tips with embossed logo for a clean, upgraded look
- Bolt-on installation using factory hanger locations—easy to do at home with included hardware and instructions
- CARB compliant and emissions-legal, purpose-built for 2012-2018 Jeep Wrangler JK/JKU 3.6L
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Max dyno gains of 11 hp and 17 lb-ft at the rear wheels from a proven straight-through Flow FX design
- Built from durable 409 stainless steel with black ceramic-coated 304S stainless steel 4.0-inch tips
- CARB (California) compliant, so this performance exhaust is street-legal
- Uses all factory hanger locations for an easy at-home install with included hardware and instructions
- Dual 2.5-inch mandrel-bent tailpipes deliver a moderate, aggressive sound and better ground clearance than stock
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max dyno gains of 11 hp and 17 lb-ft at the rear wheels for real performance
- Premium brushed 304 stainless steel construction with hand TIG welds for lasting durability
- Signature Series straight-through muffler delivers a deep, moderate-volume tone without excessive drone
- Dual 4.0-inch PVD black chrome tips and driver-side exit give your Tacoma a custom look and tow-friendly exhaust routing
- Bolt-on install using factory hanger locations, plus an added hanger, hardware, and instructions included
- CARB (California) compliant and built to fit 2024-2026 Tacoma 2.4L in 2WD and 4WD
-
- Adds a proven 21 hp and 18 lb-ft at the rear wheels on the Ram 1500 3.0L High Output
- Built entirely from 409 stainless steel for years of corrosion-resistant, trouble-free performance
- Direct-fit design uses all factory hangers and connections — easy at-home installation with included clamps and hardware
- Straight-through Flow FX absorption muffler delivers a moderate, drone-free performance tone
- Fits both 2WD and 4WD 2025–2026 Ram 1500 models and backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel cat-back with a 50 Series HD muffler and dual 3.00-inch mandrel-bent tailpipes for smooth flow and lasting durability
- Deep performance tone outside the vehicle with minimal interior drone while cruising — Flowmaster’s quietest series
- Two tailpipe exits in one kit: under-bumper for an aggressive look or side-exit to keep exhaust off your boat or trailer when towing
- Bolt-on install using factory hanger locations, with instructions and all necessary hardware included for easy at-home fitment
- CARB (California) compliant and emissions-legal, finished with large 4.00-inch polished logo-embossed stainless tips
- Fits both 2- and 4-wheel drive applications and all wheelbases
-
- Dyno-proven max gains of 13 hp and 11 lb-ft at the rear wheels for better acceleration and towing
- Built entirely from 409 stainless steel for years of trouble-free, corrosion-resistant service
- Straight-through Flow FX absorption muffler delivers great sound with no drone at a moderate level
- Direct-fit design uses all factory hanger locations and hardware for easy at-home installation
- Fits 2014-2026 RAM 2500/3500 6.4L HEMI trucks in both 2WD and 4WD
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Replaces the heavy factory transverse muffler to reduce weight and improve ground clearance
- Moderate, refined sound level that adds presence without being loud or droning
- Durable 2.50-inch mandrel-bent 409 stainless tailpipe with a polished 304 stainless 3.00-inch tip
- Fits 2- and 4-door 2018-2026 Jeep Wrangler JL with the 2.0L Turbo or 3.6L engine
- Bolts to factory hangers with all hardware included for a quick ~15-minute install
- CARB compliant and backed by a Lifetime Limited Warranty
-
- Large 2.50-inch straight-through stainless steel perforated core delivers efficient flow and a deep, traditional, mellow tone
- Moderate sound level gives you a distinctive performance note without the chambered muffler sound
- Reversible internal flow design installs in either direction to match your vehicle’s application and offsets
- Fully MIG-welded ‘bright’ 409 stainless steel construction for durability and a show-quality look
- Flow FX logo embossed on both sides of a compact case — premium appearance at an economical price point
-
- Large 3.00-inch straight-through stainless steel perforated core delivers a deep, mellow performance tone
- Moderate sound level offers a distinctive note that stands apart from chambered mufflers
- Fully MIG-welded bright 409 stainless steel construction for lasting durability and a clean appearance
- Reversible internal flow design and compact case make installation flexible across many applications
- Show-quality Flow FX embossed logo on both sides at an economical price point
-
- Large 2.50-inch straight-through stainless steel perforated core delivers efficient flow and a deep, traditional, mellow tone
- Moderate sound level gives you a distinctive performance note without the chambered muffler sound
- Reversible internal flow design installs in either direction to match your vehicle’s application and offsets
- Fully MIG-welded ‘bright’ 409 stainless steel construction for durability and a show-quality look
- Flow FX logo embossed on both sides of a compact case — premium appearance at an economical price point
-
- Large 3.00-inch straight-through stainless steel perforated core delivers a deep, traditional mellow tone
- Fully MIG-welded ‘bright’ 409 stainless steel construction for lasting, show-quality durability
- Reversible internal flow design installs in either direction to match your vehicle’s offsets
- Moderate sound level offers a distinct alternative to the chambered muffler sound
- Compact, embossed Flow FX case brings show-quality style at an economical price point
-
- Straight-through 2.25-inch stainless perforated core delivers strong flow and a deep, mellow tone
- Moderate sound level offers a distinctive alternative to the chambered muffler sound
- Fully MIG-welded 409 stainless steel construction with embossed Flow FX logo on both sides
- Reversible internal flow design installs in either direction to suit your vehicle’s offsets
- Compact case and economical price point make it an easy show-quality upgrade
-
- Larger 2.50-inch mandrel-bent stainless tubing replaces the restrictive 2.25-inch factory tailpipes and resonators
- Non-resonated dual exit delivers an aggressive HEMI tone at a moderate, street-friendly volume
- Bold 4.50-inch black ceramic coated 304S stainless tips with an embossed logo
- Bolt-on fit using factory hangers and stock exit location with all hardware and instructions included
- CARB (California) compliant for legal use on the 2019-2024 & 2026 RAM 1500 5.7L HEMI
-
- Deep, traditional mellow exhaust tone at a moderate sound level that stands apart from chambered mufflers
- Large 4.0-inch straight-through stainless steel perforated core built for high-flow, large displacement gas engines
- Fully MIG-welded bright 409 stainless steel construction for lasting durability and a show-quality finish
- Reversible internal flow design installs in either direction to fit more vehicle applications
- Compact 7-inch diameter body with embossed Flow FX logo delivers premium looks at an economical price
-
- Deep, traditional mellow tone with a moderate sound level — a distinctive alternative to chambered muffler designs
- Large 4.0-inch straight-through stainless steel perforated core promotes strong flow on large displacement gas engines
- Fully MIG-welded ‘bright’ 409 stainless steel construction with the Flow FX logo embossed on both sides
- Reversible internal flow design installs in either direction to suit your vehicle application
- Compact 7-inch diameter case delivers show-quality looks at an economical price point
-
- Moderate, deep, mellow exhaust tone that stands apart from chambered muffler sound
- Large 3.0-inch straight-through perforated stainless steel core for strong, low-restriction flow
- Reversible internal flow design installs in either direction to fit your vehicle
- Fully MIG-welded 409 stainless steel construction with embossed Flow FX logos for lasting durability
- Compact 5-inch body ideal for large displacement gas engines at an economical price point
-
- Moderate, deep and mellow exhaust tone that stands apart from chambered muffler designs
- Large 3.00-inch straight-through stainless steel perforated core for smooth flow
- Reversible internal flow design installs in either direction to match your vehicle’s offsets
- Fully MIG-welded 409 stainless steel construction for lasting durability
- Compact, show-quality case with embossed Flow FX logo at an economical price point
Showing 121–144 of 173 results
