Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Magnum FORCE AFE-21-91120-p Intake Replacement Air Filter 5 IN F X (9 IN x7-1/2) IN B x (6-3/4x5-1/2) T (Inverted) X 9 IN H
Price range: $113.09 through $130.58
-
Injen SP Short Ram Cold Air Intake System - SP1230 INJ-SP1230
$496.85
-
Chevrolet, Pontiac (5.7) Exhaust System Kit
$664.32
-
Magnum FORCE AFE-59-11332 Cold Air Intake System Spare Parts Kit GM Diesel Trucks 07.5-10 V8-6.6L (td) LMM
$43.00
-
BMW (4.4) Exhaust System Kit
$2,324.70
Image
Product
Price
-
- Max dyno gains of 11 hp and 17 lb-ft at the rear wheels from a proven straight-through Flow FX design
- Built from durable 409 stainless steel with black ceramic-coated 304S stainless steel 4.0-inch tips
- CARB (California) compliant, so this performance exhaust is street-legal
- Uses all factory hanger locations for an easy at-home install with included hardware and instructions
- Dual 2.5-inch mandrel-bent tailpipes deliver a moderate, aggressive sound and better ground clearance than stock
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate interior tone thanks to dual Super 44 Series mufflers
- Bolt-on install using factory hanger locations — includes all parts, hardware, and instructions
- 3.00-inch stainless mandrel-bent tubing finished with large 4.00-inch polished 304 stainless tips
- CARB compliant and emissions-legal for 2016-2024 Camaro SS 6.2L coupes and convertibles
- Delivers improved throttle response, power, and mileage
- Covered by the Flowmaster Lifetime Limited Warranty
-
- Delivers the loudest, most aggressive sound Flowmaster offers thanks to the Super 10™ Series muffler
- Mandrel-bent stainless steel tubing and dual 3.00-inch tailpipes maximize exhaust flow and performance
- Emissions-legal and CARB (California) compliant, so you get the sound without compliance worries
- Bolt-on install uses factory hanger locations and includes all parts and hardware for at-home fitment
- Finished with large 4.00-inch black ceramic coated double wall stainless tips and embossed logo
- Fits 2004-2008 Ford F-150 4.6L/5.4L in 2WD or 4WD, all wheelbases, backed by a Lifetime Limited Warranty
-
- Delivers an aggressive interior and exterior exhaust tone from race-proven Outlaw Series mufflers
- 3.00-inch stainless steel mandrel-bent tubing improves throttle response, power, and mileage
- Finished with large 4.00-inch black PVD coated 304 stainless steel tips featuring an embossed logo
- Bolt-on install using factory hanger locations, with all parts, hardware, and instructions included
- CARB compliant and emissions legal (Emission Code 5) for 2016-2024 Camaro SS 6.2L (2WD)
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate interior sound level for daily comfort
- 409S stainless steel with dual 2.50-inch mandrel-bent tubing and Scavenger X-pipe for maximum flow and a deep tone
- Includes Super 44 performance mufflers and specially-tuned chambered resonators to minimize interior drone
- True bolt-on install with all necessary parts, hardware and easy-to-follow instructions
- CARB (California) compliant and fits 2015-2023 Charger SE/SXT and 2015-2020 Chrysler 300S 3.6L models
- Dual 2.50-inch stainless tips exit within the factory rear bumper valence for a clean look
-
- Delivers a deep, powerful tone at a moderate/mild sound level thanks to the 50 Series HD performance muffler
- Dual mandrel-bent 3.00-inch stainless steel tailpipes with 4.00-inch polished stainless tips for max flow and a finished look
- CARB compliant and emissions-legal — keeps your 6.2L Super Duty street-legal while adding performance
- Your choice of rear under-bumper or side exit behind the rear wheels, ideal for towing
- Complete bolt-on kit with all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Stainless steel Super 10 Series muffler delivers Flowmaster’s most aggressive sound inside and out
- Dual mandrel-bent 3.00″ stainless steel tailpipes maximize flow and performance
- Black Ceramic coated 4.00″ double wall stainless tips with embossed logo add bold style
- DOR/DOS versatility lets you run Dual Out Rear or Dual Out Side exits
- CARB compliant and emissions-legal, backed by Flowmaster’s Lifetime Limited Warranty
- Complete bolt-on kit with flanged connections and all necessary hardware for easy install
-
- Dyno-proven max gains of 14 hp and 21 lb-ft at the rear wheels on the 2.4L Tacoma
- Durable 409 stainless steel with 3-inch and 2.5-inch mandrel-bent pipes for improved flow
- 50 Series HD muffler delivers an aggressive yet moderate tone with reduced drone
- Choose dual rear-exit or side-exit, both with 4-inch polished stainless tips
- Bolts on with factory-style hangers plus included hardware and instructions for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete Flowmaster Outlaw cat-back exhaust for 1994-1995 GM 1500/2500 LD with 5.0 & 5.7L engines
- Durable 409 stainless steel, mandrel-bent tubing for better exhaust gas flow
- Super 10 Series muffler delivers an aggressive sound level and maximum performance
- Dual black ceramic coated tips with embossed logo — configure for rear or side exit
- Uses factory hanger locations with included hardware and instructions for easy at-home install
- CARB (California) Compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max dyno gains of 11 hp and 17 lb-ft at the rear wheels for real performance
- Premium brushed 304 stainless steel construction with hand TIG welds for lasting durability
- Signature Series straight-through muffler delivers a deep, moderate-volume tone without excessive drone
- Dual 4.0-inch PVD black chrome tips and driver-side exit give your Tacoma a custom look and tow-friendly exhaust routing
- Bolt-on install using factory hanger locations, plus an added hanger, hardware, and instructions included
- CARB (California) compliant and built to fit 2024-2026 Tacoma 2.4L in 2WD and 4WD
-
- Aggressive-to-moderate exhaust tone from race-proven Outlaw® Series mufflers, at home on the street and the strip
- Dual mandrel-bent 2.50-inch tailpipes deliver smooth, unrestricted flow for maximum performance
- Durable 409S stainless steel construction with polished 4.00-inch stainless tips and an embossed Flowmaster logo
- True bolt-on install using factory hangers — includes all parts, hardware, and instructions for an easy at-home job
- CARB compliant and emissions-legal, so you get the sound and performance without compliance worries
- Backed by Flowmaster’s Lifetime Limited Warranty for lasting peace of mind
-
- Aggressive yet balanced sound from Super 44 Series mufflers — deep and powerful outside, comfortable inside
- Fits 2015-2017 Ford Mustang GT 5.0L, both coupes and convertibles
- Durable 409 stainless steel construction with large 4.00-inch polished stainless tips and embossed logo
- Bolt-on axle-back design includes all parts and hardware for an easy fit
- CARB compliant and emissions-legal, backed by the Flowmaster Lifetime Limited Warranty
-
- Purpose-built for the 2015-2016 Dodge Challenger R/T 5.7L Hemi with a complete bolt-on cat-back design
- Aggressive interior and exterior sound thanks to race-proven Outlaw Series mufflers and the exclusive Scavenger Series X-pipe
- Dual 3.00-inch mandrel-bent stainless tubing flows freely to help the Hemi make maximum power
- Quad 3.50-inch 304 stainless steel embossed tips deliver a muscular, head-turning look
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all necessary parts and hardware for an easy at-home installation
-
- Aggressive exterior sound from the Super 10 Series muffler while keeping a moderate interior tone for daily driving
- Durable 409S stainless steel construction with 3.00-inch inlet and dual 2.50-inch mandrel-bent tailpipes for smooth flow
- Large 4.00-inch black ceramic coated stainless tips with embossed logo for a bold, finished look
- Choose rear-exit routing for a muscular stance or side-exit routing behind the rear tires for towing an RV, boat or trailer
- Complete bolt-on kit with muffler and all hardware included for an easy at-home installation
- CARB compliant and fits 2015-2020 F-150 EcoBoost, TiVCT and 5.0L trucks in 2WD/4WD (except Standard Cab/Short Bed)
-
- Race-proven Outlaw mufflers deliver an aggressive exterior sound with a moderate interior tone for daily driving
- Full 3.00-inch mandrel-bent tubing and dual tailpipes maximize flow and performance
- Bolts to factory hanger locations for a hassle-free at-home installation with no fabrication
- Large 4.00-inch polished stainless steel tips with embossed logo add serious visual impact
- CARB (California) compliant and purpose-built for 2015-2017 Mustang GT 5.0L coupes and convertibles
-
- Race-proven dual Outlaw mufflers deliver an aggressive exterior sound with a manageable, moderate interior tone
- Full 3.00-inch mandrel-bent inlet tubing maximizes flow for real performance gains
- Bolts on using factory hanger locations for a quick, hassle-free at-home install
- Finished with large 4.00-inch highly polished stainless steel tips and embossed logo
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2015-2023 Mustang coupes and convertibles with 2.3L EcoBoost or 3.7L engines
-
- Aggressive exterior tone paired with a moderate interior volume for everyday drivability
- Dual 3.00-inch Scavenger Series X-pipe and Super 40 Series mufflers deliver a deep, powerful sound and maximum power
- Durable 409S stainless steel construction with polished 4.00-inch Flowmaster-embossed tips
- Easy bolt-on install using factory hangers, includes all parts and hardware, and reuses the OEM MDS valve actuator
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- 409 stainless steel cat-back construction built for years of trouble-free, corrosion-resistant service
- Converts Standard Output models into a true dual system for better performance gains and future mod compatibility
- Scavenger X-Pipe with D-Port technology delivers a deep, aggressive-to-moderate exhaust tone
- Tuned resonators keep the cabin comfortable while still sounding aggressive
- Bolts on using factory hangers and exits through the stock bumper cutouts for a clean fit
- Finished with dual 4.5-inch black ceramic coated tips and CARB compliant for California
-
- Aggressive interior and exterior sound from race-inspired Outlaw series mufflers
- Direct fit for 2015-2016 Charger R/T and 2015-2023 Chrysler 300 with the 5.7L Hemi
- Exclusive 2.50-inch Scavenger Series X-pipe delivers a deep, unique tone
- Durable 409S stainless steel mandrel-bent tubing with dual 2.50-inch stainless tips
- Bolt-on install using factory hangers, with all parts, hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct-fit bolt-on cat-back for 2017-2023 Dodge Charger R/T and Daytona 5.7L Hemi
- Dual 3.00-inch mandrel-bent Scavenger Series X-Pipe and Super 40 mufflers with 3.50-inch internals for maximum power and aggressive tone
- Durable 409S stainless steel construction built to last
- Re-uses factory exhaust valves and exits through factory tips for a clean OEM look
- CARB (California) compliant with all parts, hardware, and instructions included
- Aggressive exterior sound with a moderate, pleasant interior tone at cruise
-
- Constant, aggressive wide-open sound thanks to Outlaw Series mufflers and the Scavenger Series X-pipe
- Dummy valve stands keep your factory actuators happy — no check-engine codes after removing the OE valves
- Dual 3.00-inch mandrel-bent stainless tubing and quad 3.50-inch embossed 304 stainless tips for flow and looks
- Direct fitment for 6.4L SRT 392 / Scat Pack, 6.2L Hellcat, and 5.7L R/T Challengers
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all parts and hardware for an easy at-home installation
-
- Aggressive exterior tone with a moderate interior sound level—louder presence without excessive cabin drone
- CARB (California) compliant and emissions-legal for confident street use
- Bolt-on install using factory hanger locations, with all hardware and instructions included
- Mandrel-bent stainless steel tubing and specially tuned resonator/mufflers for smooth flow and a deep tone
- Finished with large 4.00-inch polished stainless steel tips and an embossed logo
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderately aggressive exterior tone while keeping the cabin sound mild — ideal for daily-driven Mustangs
- Dual Super 10 Series mufflers with 3.00-inch mandrel-bent inlet pipes for maximum flow and performance
- Durable 409S stainless steel construction finished with polished 4.00-inch stainless tips with embossed logo
- CARB-compliant and emissions-legal, so you can upgrade with confidence
- True bolt-on install with all necessary parts and hardware included, backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2015-2023 Ford Mustang 2.3L EcoBoost and 3.7L engines in 2WD
-
- Aggressive Track-mode roar with a deep, mellow everyday tone thanks to tandem 40 Series Delta Flow and dual Outlaw mufflers
- Functional exhaust valves work with your O.E. actuator motors to select between sound levels on demand
- Large quad 4.00-inch polished stainless steel tips replicate the factory NPP quad-tip look
- Full stainless steel construction backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2016-2024 Camaro SS & ZL1 6.2L coupe and convertible with factory NPP option, using factory hangers for an easy install
- CARB compliant and includes all necessary parts and hardware
Showing 241–264 of 316 results
