Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Volant Closed Box Air Intake (12635) 2003-2006 Nissan 350Z 3.5L V6-12635
$324.90
-
AEM-21-862C Cold Air Intake System
$419.99
-
Injen Technology Air Filter - X-1051-B INJ-X-1051-B
$91.53
-
Mercedes-Benz (Sedan - 4.0 - RWD) Exhaust System Kit
$2,573.88
-
aFe Power AFE-53-10015R-p QUANTUM Cold Air Intake System Dodge RAM Diesel Trucks 10-12 L6-6.7L (td)
Price range: $365.00 through $376.00
Image
Product
Price
-
- All stainless steel 409S construction backed by Flowmaster’s Limited Lifetime Warranty
- Exclusive 80 Series Crossflow muffler retains full ground clearance in the factory rear-axle location
- Mandrel-bent dual 2.50-inch pipes with H-pipe crossover for a deep, smooth tone and reduced deceleration back-rap
- Moderate sound level delivers a rich exhaust note without an overwhelming cabin drone
- CARB compliant and includes all parts, hardware, and illustrated instructions for a complete install
- Direct-fit for 1967-1974 Camaro and Firebird and 1968-1974 Nova in 2WD applications
-
- Deep, aggressive exterior sound with a moderate, livable interior tone from the Super 50 Series muffler
- 16-gauge mandrel-bent stainless steel tubing with dual 2.50-inch tailpipes and 3.00-inch polished tips
- Choose Dual Out Rear for towing or Dual Out Side for a muscular look
- Bolt-on install using factory hanger locations with all hardware included
- Emissions-legal, CARB (California) compliant, and backed by a Lifetime Limited Warranty
- Direct fit for 2006-2008 Ram 1500 5.7L Hemi, 2WD/4WD, all wheelbases except MegaCab
-
- Deep, aggressive Flow FX straight-through sound with maximum flow for real performance
- Built from durable 409S stainless steel throughout for long-lasting corrosion resistance
- Angled side-exit dual tailpipes direct exhaust away from your boat or trailer when towing
- Finished with large 4.50-inch black ceramic-coated 304S stainless tips for a custom look
- Easy at-home install using factory hanger locations, with all hardware and instructions included
- CARB (California) compliant and fits both 2- and 4-Wheel Drive applications
-
- Deep, aggressive exterior sound with a moderate interior tone from the tuned Super 50 Series muffler
- Bolt-on installation using factory hanger locations, with all parts and hardware included
- DOR/DOS design lets you exit behind the rear wheels for towing or straight out the back for looks
- 16-gauge mandrel-bent stainless steel tubing and 3.00-inch polished stainless tips for flow and style
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Purpose-built for the 2006-2008 Dodge Ram 1500 4.7L, fitting 2WD and 4WD (except MegaCab)
-
- Deep, aggressive exterior sound with a moderate, drone-free interior tone
- Direct bolt-on fit for 2000-2006 Toyota Tundra 4.7L (2WD) using factory hanger locations
- 16-gauge mandrel-bent stainless tubing and a Super 50 Series muffler for strong flow and performance
- Two tailpipe exit options — behind the rear wheels for towing or straight out back for a muscular look
- Emissions-legal and CARB compliant, finished with polished 3.00-inch stainless tips
- Includes all parts and hardware plus Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior tone with a moderate interior sound that won’t drive you out of the cab
- Heavy 16-gauge mandrel-bent stainless steel construction for lasting durability and strong flow
- Includes the stainless Super 40 Series performance muffler and polished 304 stainless tips
- Dual 2.50-inch tailpipes offer two exit options — straight out the back or side-exit for towing
- CARB compliant and made to fit 1999-2007 (2007 Classic Only) GM 1500 Ext Cab/Short Bed 4WD trucks
- Complete kit with all hardware and instructions for an easy at-home install
-
- Adds improved horsepower and torque with a moderate, aggressive performance tone inside and out
- Built entirely from durable 409S stainless steel with mandrel-bent 2.50-inch tubing
- Dual tailpipes exit both sides behind the rear tires, finished with 3.00-inch polished Flowmaster-embossed tips
- Complete bolt-on kit with instructions and all hardware for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2005-2012 Toyota Tacoma 4.0L (not standard cab or X-Runner)
-
- Heavy 16-gauge mandrel-bent stainless steel construction for long-lasting durability and maximum flow
- Super 50 Series muffler delivers an aggressive exterior tone with a moderate interior tone that won’t drown out cab conversation
- Choose your exit: true dual rear or dual side-exit behind the rear wheels — ideal for towing
- Dual 2.50-inch tailpipes clear the factory spare tire, finished with polished 304 stainless tips
- CARB (California) compliant and includes all hardware and instructions for an easy at-home install
-
- Complete cat-back dual exhaust delivering an aggressive exterior tone with a moderate, drive-friendly interior sound
- Dual 2.50-inch mandrel-bent stainless steel tubing paired with the Scavenger Series X-pipe for maximum scavenging and a deep tone
- Super 40 Series performance mufflers offer more internal volume to handle Hemi flow demands
- Highly polished 304 stainless steel 4.00-inch dual tips exit straight out under the rear valance
- Uses factory hanger locations and includes all hardware for an easy at-home installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- True dual exhaust built from all mandrel-bent 3.00-inch aluminized steel tubing for smooth, high flow
- H-pipe equalizes exhaust gas pressures for balanced sound, maximum performance, and clearance
- Ships without mufflers so you choose your exact sound level with Super 44 or Super 50 Series mufflers
- Custom designed for most 1968-1972 GM A-body cars with an easy fit in mind
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Durable 16-gauge pipe wall with dual tail pipes and simple U-bolt clamping
-
- Adds up to 7 hp and 6 lb-ft at the rear wheels over stock for a real, measurable gain
- Flow FX muffler delivers a moderate/mild tone — aggressive sound without cabin drone
- Mandrel-bent 2.5-inch 409 stainless steel construction for maximum flow and lasting durability
- Larger 4.00-inch black ceramic-coated tips with embossed logo for a bold custom look
- Uses factory hangers and includes all hardware for a straightforward bolt-on install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Includes a pair of Super 44 Series mufflers tuned for that iconic deep, aggressive 5.0L Fox body sound
- Bolt-on installation using factory hanger locations, with all hardware and easy-to-follow instructions included
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Long 2.50-inch 304 stainless steel dual tips deliver a genuine show-car look
- Emissions-legal and CARB (California) compliant to keep your Mustang street-legal
- Fits 1987-1993 Mustang LX and 1986 Mustang GT with 5.0L, coupes and convertibles
-
- Bolt-on performance with maximum dyno gains of 21 hp and 26 lb-ft at the rear wheels
- Durable 409 stainless steel construction throughout for long-term corrosion resistance
- Deep, moderately aggressive Flow FX straight-through sound tuned for daily driving and towing
- Dual mandrel-bent tailpipes exit through factory bezels to keep the stock dual exhaust look
- CARB compliant and legal in all 50 states
- Uses factory hangers and includes hardware and instructions for easy at-home installation
-
- Aggressive exterior sound with a moderate interior tone, tuned by Super 44 Series performance mufflers
- 3.00-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe for maximum power and a deep tone
- Dual tailpipes with large 4.00-inch polished 304 stainless steel tips that fill the factory valance cutouts
- Easy bolt-on install using factory hanger locations, with all hardware and instructions included
- Emissions-legal and CARB compliant, backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2010-2013 Camaro SS 6.2L coupes (does not fit NPP quad-tip models)
-
- Frees up power and sound on 4.7L and 5.7L Hemi 2009-2024* (classic body) RAM 1500 4WD trucks
- 50 Series HD muffler tunes in an aggressive exterior tone while keeping cab drone to a minimum
- Durable 16-gauge mandrel-bent stainless steel tubing with dual polished 3.00-inch tips
- Choose dual side exit for towing or straight rear exit for a muscular look
- Complete kit with all parts and hardware for an easy at-home install
- CARB (California) compliant for legal, worry-free upgrading
-
- Deep, powerful tone from the large-case 80 Series Cross-flow performance muffler with a moderate-to-aggressive exterior sound
- Full 3.00-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage over the restrictive factory exhaust
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- Bolt-on install using factory hanger locations, U-Bolt clamping, and all included hardware
- CARB (California) compliant with Emission Code 5 and configured for 2WD applications
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Complete cat-back dual exhaust kit with a milder, deep tone from Super 40 Series mufflers
- 2.50-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage
- Dual tailpipes finished with polished stainless steel tips for a true dual-exhaust look
- Moderate exterior and mild-to-moderate interior tone for comfortable daily driving
- Includes all necessary parts and U-Bolt hardware for an easy at-home installation
- CARB (California) compliant and fits both coupes and convertibles
-
- Dual Super 44 Series mufflers deliver Flowmaster’s iconic deep, aggressive rumble
- 2.50-inch mandrel-bent stainless steel tubing for smooth, high-flow performance
- Polished 4.00-inch stainless tips embossed with the Flowmaster logo for a finished look
- Uses factory hangers and includes all parts and hardware for easy installation
- CARB (California) compliant and backed by a Lifetime Limited Warranty
- Fits 2005-2010 Mustang GT, GT500 and California Special coupes and convertibles (4.6L/5.4L)
-
- Direct fit for 1996-1999 Chevy/GMC 1500 Extended Cab / Short Bed 5.7L with dual cats
- 409 stainless steel with 16-gauge, 3.0″ to 2.5″ mandrel-bent tubing for unrestricted flow
- Straight-through Flow FX muffler delivers a deep exterior tone with a very mild cabin sound
- Dual 4.50″ black ceramic-coated 304 stainless tips, embossed with the Flowmaster name
- Installs at home using factory hangers with all hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- True dual crossmember-back design with a built-in H-pipe crossover for a fuller, balanced sound
- Dual Super 44 Series mufflers deliver a moderate to aggressive interior and exterior tone
- Built from 16-gauge mandrel-bent aluminized steel with 2.50-inch tailpipes for durable, smooth flow
- Delivers improved throttle response, power, and mileage like all Flowmaster systems
- Includes 3.00-inch polished stainless steel tips plus all hangers and hardware for installation
- CARB compliant and backed by Flowmaster’s 3-Year Limited Warranty
-
- Deep, moderate exhaust tone from straight-through Flow FX mufflers with large 3.00-inch cores
- Dual 3.00-inch mandrel-bent stainless steel tubing for smooth, high flow
- Bolt-on install using factory hanger locations — includes all parts, hardware, and instructions
- Aggressive 4.50-inch black ceramic coated tips with embossed logo fill the factory cutouts
- CARB compliant and backed by a Lifetime Limited Warranty
- Application-specific fit for 2013-2014 Mustang GT and 2013 Boss 302 5.0L models
-
- Deep, aggressive exterior sound with a mild, moderate interior tone from the Super 50™ Series muffler
- Durable 16-gauge mandrel-bent aluminized steel construction with dual 2.50-inch tailpipes and large 3.00-inch polished stainless steel tips
- DOR/DOS flexibility — exit behind the rear wheels for towing or straight out the back for a muscular look
- True bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and emissions-legal, backed by a 3-Year Limited Warranty
- Fits 2004-2008 Ford F-150 and Lincoln Mark LT with 4.6L or 5.4L engines, 2WD or 4WD, all wheelbases
-
- True dual crossmember-back system with a built-in H-pipe crossover for balanced flow and tone
- 16-gauge mandrel-bent stainless steel tubing for durability and unrestricted exhaust flow
- Super 44 Series mufflers (P/N 842546) deliver a moderate to aggressive interior and exterior tone
- Improves throttle response, power, and mileage — hallmark Flowmaster performance benefits
- Includes all hangers and hardware for an easy, straightforward installation
- CARB (California) compliant with a 2.50″ inlet and dual tail pipes
-
- Direct-fit cat-back system for 1998-2002 Camaro/Firebird with the 3.8L engine
- 80 Series Crossflow muffler delivers a deep, muscular exterior tone with a moderate interior sound
- 2.50-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage
- Dual 2.50-inch tailpipes with large 3.00-inch polished stainless steel tips for a true dual look
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Includes a specially tuned resonator plus all necessary parts and hardware for an easy fit
Showing 1–24 of 316 results
