Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
17-20 Ford F-150 Raptor Exhaust System Kit
$2,627.18
-
22-26 Nissan Frontier (3.8) Exhaust System Kit
$582.44
-
Sinister Diesel Intake Elbow (Hexagon) & Cold Side Charge Pipe Kit for 2003-2007 Ford Powerstroke 6.
$569.99 $740.99 -
Mishimoto Transmission Cooler for Toyota GR Supra 3.0T 2020+
$582.95
-
AIRAID Performance Air Intake System- 301-165
$90.00
Image
Product
Price
-
- Deep, mellow, mild-to-moderate tone from the 70 Series Big Block II muffler (P/N 53073) — refined inside and outside the cab
- 3.00-inch mandrel-bent aluminized steel inlet and tailpipe for smooth, unrestricted flow
- Bolt-on fit that uses factory hanger locations for a quick, at-home installation with included hardware
- CARB (California) compliant and emissions-legal, so it’s street-legal in all 50 states
- Purpose-built for 1994–1997 Ford F-250/F-350 5.8L/7.5L trucks — fits 2WD and 4WD, all wheelbases including Crew Cab
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Complete cat-back kit with a 50 Series Big Block muffler for a mild-to-moderate, non-droning tone
- 3.50-inch mandrel-bent stainless steel tubing plus a large 4.00-inch polished stainless tip
- Tailpipe exits behind the right rear tire, purpose-built for towing applications
- Uses factory hanger locations for a quick, at-home install with included hardware and instructions
- Emissions legal and CARB compliant, backed by a Limited Lifetime Warranty
- Purpose-fit for 2011-2019 Silverado/Sierra 2500HD/3500HD crew cab 6.0L trucks (2WD & 4WD, 6.5ft bed)
-
- Steps up to 3-inch mandrel-bent aluminized steel tubing for improved flow over the factory exhaust
- Includes the Super 50 Series muffler (PN 53056) for a mild interior and moderate exterior tone — power without the drone
- True bolt-on design uses factory hanger locations and includes all parts and hardware for easy at-home installation
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom look
- Ideal for daily drivers and light towing such as boats and RVs; CARB compliant and backed by a 3-year Limited Warranty
-
- Straight-through Flow FX muffler delivers a moderate, deep and powerful tone with minimal interior resonance
- 409 stainless steel construction and 16-gauge mandrel-bent tubing for durability and unrestricted flow
- 4.50-inch black ceramic-coated 304 stainless steel tip embossed with the Flowmaster name
- Uses factory hanger locations with all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- High-tucked tailpipe routing helps protect the system over rocky, uneven terrain
-
- Built from durable 409S stainless steel for years of trouble-free performance
- Flow FX straight-through muffler delivers an aggressive, deep performance sound
- Finished with a large 4.50-inch black ceramic coated 304S stainless tip with embossed logo
- Bolts on using factory hangers — no cutting or welding, with all hardware and instructions included
- CARB compliant and fits 2009-2013 Silverado/Sierra 4.8L and 5.3L, 2WD and 4WD
-
- Delivers improved throttle response, power, and mileage with a moderate, non-intrusive tone
- Built from large 3.00-inch aluminized steel tubing and includes a 70 Series Big Block II muffler (PN 53073)
- Especially recommended for towing applications thanks to its efficiency-focused, mild-to-moderate sound
- Angle-cut tailpipe lets you finish the look with your own choice of exhaust tip (sold separately)
- CARB (California) compliant and fits both 2WD and 4WD models on 133, 155, or 168.4-inch wheelbases
- Easy fit with all necessary parts, hardware, and U-Bolt clamping included
-
- Delivers improved throttle response, power, and mileage in a true Flowmaster cat-back upgrade
- 60 Series Delta Flow muffler tuned for a moderate exterior note and mild interior tone
- Durable aluminized steel build finished with a 2.50-inch brushed stainless steel tip for a subtle custom look
- Includes the muffler, 2.25-inch mandrel-bent tailpipe, U-bolt hardware, and all necessary parts for easy installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Purpose-built fitment for 4WD applications with a clean single tailpipe design
-
- Direct fit for 1997-1999 Jeep Wrangler TJ with 2.5L or 4.0L engines using factory hanger locations
- All stainless steel construction with mandrel-bent tailpipe for durability, flow, and long life
- Flow FX straight-through muffler delivers a moderate, deep, powerful sound without excessive drone
- Tailpipe tucked high in the undercarriage to protect it on rocky off-road terrain
- Large 3.50-inch black ceramic coated tip embossed with the Flowmaster logo for an aggressive look
- CARB compliant and includes all hardware and instructions for a quick at-home install
-
- Delivers a deep, mellow, moderate tone from the 70 Series Big Block II muffler without excessive drone
- Scavenger Series Y-collector and 3.00-inch mandrel-bent piping boost scavenging and torque
- CARB (California) compliant and emissions-legal for street use
- Bolt-on design uses factory hanger locations and includes all hardware for easy at-home installation
- Custom-fit for 1996-1999 Silverado / Sierra 1500 with the 5.7L engine
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Complete bolt-on cat-back kit that connects to the factory flange and uses factory hanger locations for an easy install
- Deep, powerful sound outside the truck with a moderate, drone-free tone inside the cab
- Durable stainless steel with 3.00-inch mandrel-bent tubing and a straight-through Flow FX muffler for smooth flow
- Finished with a large 4.50-inch black ceramic coated tip embossed with the Flowmaster name
- CARB (California) compliant and includes all parts, hardware and detailed instructions
- Engineered specifically for 2015-2020 Ford F-150 2.7L, 3.3L, 3.5L Ecoboost, 3.5L Ti-VCT and 5.0L engines
-
- Built from 16-gauge mandrel-bent aluminized steel with 60 Series Delta Flow mufflers for durable, free-flowing performance
- Improves throttle response, power, and mileage while adding an aggressive American Thunder tone
- Large 4.00-inch polished stainless steel tips fill the rear valance cutouts for a muscular, integrated look
- Moderate interior and exterior sound level lets your performance be heard without overwhelming the cabin
- CARB (California) compliant and includes all parts and hardware for an easy axle-back installation
- Fits both coupes and convertibles in 2WD applications
-
- Deep, powerful exterior tone with a moderate interior sound thanks to the dual inlet 50 Series Big Block muffler
- Delivers improved throttle response, power, and mileage like every Flowmaster cat-back system
- 3.50-inch aluminized tailpipe exits behind the right rear wheel — ideal for towing setups
- Finished with a large 4.00-inch polished 304 stainless steel tip embossed with the Flowmaster logo
- CARB (California) compliant with all necessary parts and hardware for an easy, bolt-in install
- Direct fitment for 2001-2006 (2007 Classic) Silverado / Sierra 2500HD/3500HD with 6.0L or 8.1L engines
-
- 3.00-inch mandrel-bent aluminized steel tubing delivers efficient flow, improved throttle response, power, and mileage
- 50 Series Big Block muffler tuned for a deep, moderate exterior tone with a mild-to-moderate interior tone
- Finished with a large 3.50-inch polished 304 stainless steel tip for a subtle custom look
- Uses factory hanger locations and includes all necessary parts and hardware for easy installation
- CARB compliant and especially recommended for towing applications
- Backed by a 3-year Limited Warranty
-
- Improves throttle response, power and mileage with 3.00-inch mandrel-bent aluminized tubing
- Mild interior and moderate exterior tone from the included Super 50 Series muffler — refined, not loud
- Single-out-side tailpipe exits behind the right rear wheel, making it especially suited for towing
- CARB (California) compliant and ships with all necessary parts and hardware for an easy fit
- Subtle silver aluminized finish delivers a clean custom look under standard cab/short bed trucks
-
- Moderate exterior tone with a mild interior tone — great power without loud cabin drone
- 3.00-inch mandrel-bent 409 stainless steel tubing paired with an included 50 Series Big Block muffler
- Single side-exit tailpipe routes behind the right rear wheel, keeping exhaust off your boat or trailer while towing
- Delivers improved throttle response, power and mileage
- CARB (California) compliant and includes all parts, hardware and easy-to-follow instructions
-
- Steps up to 3.00-inch mandrel-bent aluminized steel tubing and the improved Super 50 Series muffler for better flow over stock
- Delivers a mild, refined tone — moderate outside, mild to moderate inside — ideal for drivers who want efficiency without a lot of noise
- Purpose-built for daily drivers and light towing such as boats and RVs
- Bolt-on design uses factory hanger locations and includes all parts and hardware for easy at-home installation
- Finished with a 3.50-inch polished stainless steel tip and backed by a 3-Year Limited Warranty on aluminized steel
- CARB (California) compliant and available in a Lifetime-warranty stainless steel version (part# 817403)
-
- Deep, aggressive exhaust tone and increased performance from the Flow FX series muffler
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Durable 3.0-inch mandrel-bent 409 stainless steel tubing built for maximum exhaust flow
- Direct-fit design uses factory hanger locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2007-2018 Jeep Wrangler JK models with the 3.6L or 3.8L engine
-
- Exclusive Scavenger Series Y-pipe uses back-to-back D-shaped ports for a stronger scavenging effect that helps build power and torque
- Straight-through Flow FX muffler delivers a deep, powerful sound outside with a moderate tone inside the cab
- Large 4.50-inch black ceramic-coated tip embossed with the Flowmaster name for an aggressive, finished look
- Bolt-on install uses factory hanger locations and includes all necessary parts, hardware, and detailed instructions
- CARB (California) compliant with Emission Code 5 for street-legal peace of mind
- Purpose-built fitment for the 2017-2024 Nissan Titan 5.6L, ideal for daily driving and towing
-
- Full stainless steel construction with mandrel-bent tubing for smooth, unrestricted exhaust flow
- Straight-through Flow FX muffler delivers a deep, aggressive sound outside with a moderate tone inside the cab
- Finished with a large 4.50-inch black ceramic-coated tip embossed with the Flowmaster name
- Bolts to factory hanger locations and includes all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and street legal in all 50 states
- Direct fit for 2019-2023 Ford Ranger 2.3L EcoBoost 2WD/4WD EC/CC with 126.8-inch wheelbase
-
- Deep, aggressive Flow FX muffler tone with increased performance for the 2016-2023 Tacoma 3.5L
- 3.0-inch mandrel-bent 409 stainless steel tubing delivers maximum exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolts to factory hanger locations with all necessary hardware included for an easy install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Dyno-proven gains of 4 hp and 5 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Aggressive Flow FX series muffler delivers a bold, performance-tuned sound
- Bolts on using factory hangers with all necessary hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive exhaust tone from the tuned Flow FX series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up using factory hangers and mounting locations with all hardware included for easy installation
- Fits 2009-2014 Ford F-150 with 3.5L EcoBoost, 4.6L, 5.0L, and 5.4L engines and is CARB compliant
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive-to-moderate exhaust note from the Flow FX series muffler gives your Tundra a deeper, purposeful sound
- Dyno-proven gains of 5 hp and 6 lb-ft of torque at the rear wheels
- Turndown dump-exit design eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Uses factory mounting locations with all hardware included for an easy bolt-on install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers improved throttle response, power, and mileage with a proven Flowmaster cat-back design
- Mild interior tone and moderate exterior sound — added performance without the drone
- 70 Series Big Block II muffler and 3.00-inch mandrel-bent aluminized tubing for a deep, mellow note
- Single side-exit with turn-down tip keeps exhaust off your boat or trailer while towing
- Bolt-on install using factory hangers, U-Bolt clamps, and all included hardware
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
Showing 1–24 of 127 results
