Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Edge Products AMPd 2.0 Throttle Booster - EDG-28862-2
$299.95 $337.95 -
Mishimoto Wheel Spacers 40mm Black 5x114.3 66.1 Bore M12x1.25
$188.95
-
Mishimoto Cold-Side Intercooler Pipe Kit – Camaro 2.0T & ATS 2.0T
$327.95
-
Mishimoto Plug-N-Play Aluminum Fan Shroud Kit - BRZ/FR-S/86
$377.95
-
Takeda AFE-56-70037D-p Momentum Cold Air Intake System Toyota GR Supra (A90) 21-22 L4-2.0L (t)
Price range: $420.00 through $435.00
Image
Product
Price
-
- Outlaw® Series dual mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing plus quad 4.00-inch black ceramic coated 304 stainless tips
- Includes valves to work with your factory active exhaust actuators for on-demand sound
- Bolts on using factory hangers with all parts, hardware, and instructions for at-home installation
- CARB (California) Compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2023 Mustang GT 5.0L (Active Performance Exhaust) coupes and convertibles
-
- Engineered specifically for 2015-2017 Ford Mustangs with the 3.7L engine
- Dual 2.25-inch stainless steel mandrel-bent tubing for smooth, high-performance flow
- Scavenger Series X-pipe chamber delivers a deep, unique tone and maximum power
- Run it with the factory rear muffler or a Flowmaster axle-back system for full flexibility
- Slip-fit, clamp-on connections make installation straightforward
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- No-resonator X-pipe design increases exhaust sound level while helping the 5.0L make maximum power
- Mandrel-bent stainless steel construction with a durable 16-gauge pipe wall
- Works with factory rear mufflers or a Flowmaster / Hurst Elite Series axle-back for a full upgrade
- Slip-fit, clamp-on connections and included hardware make installation straightforward
- Purpose-built for 2015-2017 Ford Mustang GT coupe and convertible 5.0L models
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Flowmaster 40 Series Delta Force race muffler with proven Delta Flow technology for strong power and an aggressive tone
- Delivers a substantial decibel reduction over open headers while keeping race-ready sound character
- 3.50-inch inlet diameter supports high-flow, higher-output performance exhaust builds
- Universal fitment gives fabricators freedom to build a custom cat back exhaust system
- High-temperature paint finish stands up to the heat of hard racing use
-
- Race-proven Outlaw Series mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing for high flow, durability, and longevity
- Quad 4.00-inch polished stainless steel tips with embossed logo for an aggressive, attention-grabbing look
- Includes valves to reuse your factory exhaust actuators, preserving on-demand active exhaust control
- Bolts on using factory hangers with all hardware and detailed instructions for an easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Flow FX sound with a moderate everyday tone thanks to the straight-through muffler design
- Durable 409 stainless steel construction throughout for lasting corrosion and heat resistance
- Large 4.50-inch black ceramic-coated 304S stainless tips with embossed logo for a custom look
- Side-exit dual 2.50-inch tailpipes direct exhaust away from your boat or trailer when towing
- Bolt-on install using factory hangers, with an added hanger, hardware, and instructions included
- CARB compliant and engineered specifically for 2009-2013 Silverado/Sierra 1500 5.3L trucks
-
- Flowmaster Delta Flow technology delivers excellent power characteristics with good sound reduction
- Aggressive sound level with substantial decibel reduction over open headers for race applications
- 3.50″ inlet diameter and 9.50″ body width support high-flow exhaust systems
- Durable high-temperature paint finish stands up to demanding exhaust heat
- Universal fitment gives fabricators flexibility for custom exhaust builds
-
- Adds max dyno gains of 4 hp and 4 lb-ft at the rear wheels over stock
- Mandrel-bent 2.5-inch 409 stainless steel tubing for maximum flow and durability
- Flow FX muffler delivers a moderate, street-friendly exhaust note
- Larger 3.50-inch black ceramic-coated tips with embossed logo for a custom look
- Bolt-on install using factory hangers and included hardware — fits models with rear bumper exhaust bezels
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Moderate, deep and mellow tone that stands apart from the traditional chambered Flowmaster sound
- Straight-through 3.00-inch stainless steel perforated core keeps flow strong on large displacement gas engines
- Reversible internal flow design lets you install it in either direction to fit your application
- Fully MIG-welded bright 409 stainless steel case with embossed Flow FX logos for a show-quality finish
- Compact case size and economical price make genuine Flowmaster performance easy to fit and afford
-
- Full stainless steel construction with dual 2.50-inch mandrel-bent tubing for durability and smooth flow
- Scavenger X-Pipe and Flow FX straight-through mufflers produce a deep, aggressive tone with a moderate interior sound level
- Purpose-built for the 2011-2014 Dodge Charger R/T and Chrysler 300C 5.7L Hemi
- Uses factory hangers and exits within factory bezels for a stealthy, OEM-style look with easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel construction with dual 2.50-inch mandrel-bent tubing for lasting durability and smooth flow
- Scavenger Series X-Pipe and straight-through Flow FX mufflers deliver a deep, aggressive tone with a moderate interior sound level
- Mounts to factory hangers and exits through factory bezels for a stealthy, OE-style look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all necessary parts, hardware and detailed instructions for an easy at-home install
- Purpose-built for the 2009-2014 Dodge Challenger R/T 5.7L Hemi
-
- Long tube, unequal length design with 1-3/4 inch primaries and a 3.00-inch collector for optimized exhaust scavenging on GM Big Block engines
- Protective Silver Ceramic coated finish helps manage heat and resist corrosion while looking great
- Rugged 16-gauge tube construction with a 3/8-inch header flange for durability
- Complete kit includes collector, reducers, gaskets, and all bolts, studs, and hardware for installation
- Fits Detroit Speed & Engineering front sub frames with rack and pinion steering when big block frame stands and motor mounts are used
- High Performance grade Scavenger Series Elite engineering from Flowmaster
-
- Complete true dual crossmember-back exhaust built specifically for 1968-1972 GM A-body V8 vehicles
- 2.50-inch mandrel-bent stainless steel tubing plus a built-in H-pipe improves throttle response, power, and mileage
- Large-case Super 40 Series mufflers deliver an aggressive interior and exterior tone
- Dual 2.50-inch tailpipes exit at a slight down angle under the rear bumper for a muscular look
- Includes all hangers and hardware needed for installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Larger Super 50 case significantly reduces interior resonance for a deep, rich tone without cabin drone
- Built from 16-gauge 409S stainless steel and fully MIG welded for maximum durability
- Delta Flow® design delivers mileage and power gains along with a mild sound level
- 3.00-inch inlet with dual outlet location fits late-model muscle car exhaust builds
- High-temperature paint finish adds extra protection against heat and the elements
-
- Economical, direct-fit alternative to a full cat-back system for the 2009-2024* RAM 1500 5.7L Hemi
- Flow FX straight-through design delivers a deep, moderate-to-aggressive exhaust note inside and out
- 409 stainless steel body and 3.00-inch mandrel-bent tubing for durability and smooth flow
- Bolts on using factory hangers with no cutting or welding — installs in about 25 minutes
- Includes clamps, hardware, and easy-to-follow installation instructions
-
- Economical alternative to a full cat-back — upgrade sound and flow without the higher cost
- Deep, powerful moderate-to-aggressive tone inside and outside the cab
- Straight-through Flow FX muffler with 3.00-inch mandrel-bent tubing for great sound and maximum performance
- True direct-fit: uses factory hangers and connections, installs in about 25 minutes
- Durable 409 stainless steel construction backed by a One (1) Year Limited Warranty
- Includes clamps, hardware and instructions; fits all 2019*–2024 and 2026 RAM 1500 5.7L Hemi, 2WD/4WD and all wheelbases
-
- Long tube, unequal-length design with 1-3/4 inch 16-gauge stainless primaries for optimized LS exhaust scavenging
- Heavy-duty 3/8 inch laser-cut flanges and gasket-free ball flange connectors for a precise, leak-resistant seal
- Silver Ceramic coated finish for improved heat management and lasting durability
- Complete kit includes reducers, a 3.00 inch collector, and the necessary bolts/studs
- Purpose-built for GM Gen III/IV LS engines, ideal for LS-1 and LS-6 swaps into classic Buick, Chevy, Oldsmobile and Pontiac muscle cars
-
- Straight-through 3.00-inch stainless perforated core delivers high flow with a deep, mellow, moderate tone
- Fully MIG-welded bright 409 stainless steel construction with Flow FX logo embossed on both sides for a show-quality finish
- Reversible internal flow design installs in either direction to match your vehicle’s offsets and layout
- Universal fitment with a 2.25-inch inlet, ideal for 4/6 cylinder engine applications
- Compact case and economical price point for a performance muffler that’s easy to fit into any build
- Distinct alternative to the chambered Flowmaster sound for enthusiasts wanting a refined exhaust note
-
- Delta Flow technology delivers excellent power characteristics for race applications
- Aggressive sound level with substantial decibel reduction over open headers
- Large 4.00″ inlet supports high-flow exhaust system builds
- High-temperature paint finish stands up to intense exhaust heat
- Purpose-built 40 Series Delta Force race muffler ready to slot into your setup
- Exhaust tips sold separately so you can finish the build your way
-
- Deep, aggressive Flow FX sound from a single inlet/dual outlet straight-through muffler
- Durable 409 stainless steel construction built for years of trouble-free service
- Custom look with dual 4.50-inch black ceramic-coated 304 stainless steel tips through the factory bumper cutouts
- Easy at-home install using all factory hanger locations — no cutting or welding required
- CARB (California) compliant and fits 2WD/4WD models in all cab and bed configurations
- Includes the Flow FX muffler, installation instructions, and all necessary hardware
-
- Deep, moderate performance sound from the Flow FX straight-through muffler without excessive cabin drone
- 409S stainless steel construction plus a black ceramic-coated 304S stainless tip for lasting durability and custom looks
- Bolts to all factory hanger locations for a simple, at-home installation with included hardware and instructions
- 3.00-inch mandrel-bent tailpipe promotes smooth, unrestricted flow for maximum performance
- CARB (California) compliant, so it’s street-legal in emissions-strict states
- Fits 2014-2019 Silverado/Sierra 4.3L and 5.3L trucks in 2wd and 4wd configurations
-
- Moderate, deep and mellow performance tone that stands apart from chambered Flowmaster mufflers
- Large 3.00-inch straight-through stainless perforated core for strong exhaust flow
- Reversible internal design installs in either direction to fit your application and offsets
- Fully MIG-welded 409 stainless steel with embossed Flow FX logos on both sides
- Compact, show-quality case at an economical price point
- Universal fit with a 2.25-inch inlet — exhaust tip sold separately
-
- Moderate, deep and mellow performance tone that stands apart from chambered Flowmaster mufflers
- Straight-through 3.00-inch stainless steel perforated core for free-flowing exhaust
- Fully MIG-welded bright 409 stainless steel with embossed Flow FX logo for show-quality looks
- Reversible internal flow design installs in either direction to suit your fitment and offsets
- Compact case and economical price point make genuine Flowmaster quality accessible
- Universal fit with a 3.00-inch inlet, ideal for late model muscle car builds
-
- True direct-fit for 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost — no cutting or welding
- Straight-through Flow FX muffler with dual 3.00-inch inlets/outlets for great sound and maximum flow
- Durable construction: 304 stainless steel muffler body with 3.00-inch mandrel-bent 409 stainless tubing
- Moderate-to-aggressive sound delivers a deep, powerful exhaust note inside and out
- Installs in under 30 minutes using factory hangers — clamps, hardware, and instructions included
Showing 649–672 of 1011 results
