Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
-
AEM 409
-
aFe Power 2391
-
Airaid 307
-
AWE Tuning 791
-
BBK 199
-
Corsa 57
-
CSF 1637
-
Diablosport 213
-
Dinan 816
-
Edge 175
-
FASS Fuel Systems 290
-
Flowmaster 892
-
Holley 1
-
Injen 595
-
JLT 79
-
K&N Filters 2839
-
Magnum FORCE 539
-
Mishimoto 1958
-
S&B 253
-
Sinister 52
-
Sniper Motorsports 1
-
Superchips 47
-
Takeda 172
-
Volant 176
-
XDR 29
Latest Products
-
BBK THROTTLE BODY GASKET KIT- MUSTANG 5.0 80MM
$16.99 $19.99 -
Can-Am Engine Air Filter
$12.95 $28.20 -
K&N Filters RC-2500 Universal Air Filter
$83.99
-
Mishimoto Intercooler & Pipe Kit for 2011-2014 F-150 EcoBoost
$1,749.95 $1,925.00 -
AIRAID Junior Air Intake System- 200-782
$262.99
Image
Product
Price
-
- Adjustable fuel pressure from 1-75 PSI lets you tune fuel delivery for street or competition builds
- High-performance 140GPH flow rate supports Powerstroke applications from stock to a moderate 0-700 HP
- Boost compensation port maintains fuel pressure under full throttle when it matters most
- Rugged 6061 T-6 billet aluminum construction with quiet FASS Whisper Technology
- Complete kit includes all mounting hardware plus a built-in fuel pressure gauge port
- Purpose-built for 1999-2007 Ford Powerstroke 7.3L and 6.0L trucks and SUVs
-
- Adjustable fuel pressure from 1-75 PSI lets you dial in fuel delivery for race or competition Powerstroke builds
- 220GPH flow rate supports demanding setups in the 600-900 HP range
- Boost compensation port raises fuel pressure with intake manifold air pressure to hold pressure under full throttle
- Built with the same motor used in the FASS Titanium Signature Series for proven reliability
- 6061 T-6 Billet Aluminum Bulkhead Fitting with 5/8-inch suction tube and 1/2-inch return, included in the kit
- Direct fit for 1999-2007 Ford Powerstroke 7.3L and 6.0L Truck/SUV applications
-
- Adjustable fuel pressure from 1-75 PSI lets you dial in delivery for race or competition Powerstroke builds
- 240GPH flow rate supports high-horsepower diesel applications in the Super Extreme 900-1200 HP range
- Boost compensation port raises fuel pressure under full throttle to keep fuel delivery consistent when it matters most
- Machined from durable 6061 T-6 Billet Aluminum with a 5/8″ Suction Tube and 1/2″ Fuel Return Port
- Uses the same proven motor found in the flagship Titanium Signature Series systems
- Complete kit includes the Bulkhead and Suction Tube for 1999-2007 Ford Powerstroke Truck/SUV
-
- Adjustable fuel pressure from 1-20 PSI lets you customize fuel delivery for street, race, or competition builds
- High-performance 100GPH flow supports stock to moderate 0-600 HP 6.4L Powerstroke applications
- Boost compensation port raises fuel pressure under full throttle to maintain supply when it matters most
- Built with the same motor as the FASS Titanium Series and machined from durable 6061 T-6 billet aluminum
- Whisper Technology, a built-in gauge port, and all mounting hardware included in the kit
-
- 165GPH flow rated for moderate to extreme 600-900 HP Powerstroke 6.4L builds
- Adjustable fuel pressure from 1-20 PSI lets you dial in delivery for street, race, or competition
- Boost compensation port raises fuel pressure under full throttle when it matters most
- Whisper Technology plus a built-in fuel pressure gauge port for quiet, monitored operation
- Durable 6061 T-6 billet aluminum construction, sold as a kit with all mounting hardware included
- Built with the same motor as the FASS Titanium Signature Series for proven performance
-
- Delivers 250 gallons per hour to feed high-horsepower 900-1200 HP Powerstroke builds
- Adjustable fuel pressure from 1-75 PSI lets you customize delivery for race or competition setups
- Boost compensation port raises fuel pressure under full throttle for consistent delivery when it matters most
- Uses the same proven motor found in the FASS Titanium Signature Series
- Complete kit with 6061 T-6 Billet Aluminum Bulkhead and 5/8 inch Suction Tube
- Designed specifically for 2008-2010 Ford Powerstroke 6.4L trucks and SUVs
-
- 290GPH flow rate powered by the same motor used in the FASS Titanium Signature Series
- Adjustable fuel pressure from 1-75 PSI to fine-tune delivery for race or competition diesel engines
- Built-in boost compensation port raises fuel pressure under full throttle to keep supply strong when it matters
- Machined from durable 6061 T-6 Billet Aluminum with a clean black finish
- Complete kit includes a billet Bulkhead fitting with 5/8-inch Suction Tube and 1/2-inch Fuel Return Port
- Purpose-built for 2008-2010 Ford Powerstroke 6.4L trucks and SUVs, supporting up to 1200-1500 HP applications
-
- Fully adjustable 1-75 PSI fuel pressure lets you dial in delivery for stock to moderate 0-700 HP Powerstroke builds
- High-output 140 GPH flow uses the same proven motor found in the FASS Titanium Series
- Boost compensation port raises fuel pressure under full throttle to maintain delivery when it matters most
- Whisper Technology keeps operation quiet while improving overall fuel flow
- Durable 6061 T-6 billet aluminum housing with a built-in gauge port and all mounting hardware included
- Application-specific fit for 2011-2016 Ford Powerstroke 6.7L Truck/SUV
-
- Adjustable 1-75 PSI fuel pressure lets you customize fuel delivery for street, race, or competition builds
- Delivers 220 GPH at 55 PSI using the same proven motor as the FASS Titanium Series
- Built-in boost compensation port maintains fuel pressure under full throttle when it matters most
- Machined from durable 6061 T-6 Billet Aluminum for long service life
- Complete kit includes a billet Bulkhead Fitting with 5/8-inch Suction Tube and 1/2-inch Fuel Return Port
- Direct fit for 2011-2016 Ford Powerstroke 6.7L Truck and SUV applications
-
- Massive 240GPH flow rate rated for Super Extreme 900-1200 HP builds
- Adjustable 1-75 PSI fuel pressure lets you dial in delivery for street, race, or competition
- Boost compensation port raises fuel pressure under full throttle when it matters most
- Uses the same proven motor found in FASS Titanium Series Systems
- Durable 6061 T-6 Billet Aluminum bulkhead with 5/8″ suction tube and 1/2″ return port
- Complete kit fits 2011-2016 Ford Powerstroke 6.7L Truck/SUV applications
-
- Complete kit with FASS Connect ECU, Gauge, and a 0-100 PSI fuel pressure sensor to start monitoring right away
- Wireless ECU-to-gauge and app communication delivers an ultra-clean install with flexible gauge mounting
- 5 sensor inputs support 0-100 PSI pressure, -40 to 260 degree temp, and 2,000 degree EGT sensors
- 2 relay trigger outputs power FASS Fuel Heaters or accessories directly from the FASS Connect APP
- Add a second pressure sensor to track Extreme Water Separator filter life in real time
- Monitor filter life, fuel pressure, and drivetrain parameters right from your phone or gauge
-
- Complete Drop-In service bundle: two XWS3002XL Extreme Water Separator Filters plus two CWS1010 Coalescing Water Separator Filters in one pack
- Two full filter sets per pack — perfect for stocking a shop or keeping your garage ready for the next fuel filter change
- Matched-filter design for RAM and Ford Drop-In systems, where the CWS1010 must be used with the XWS3002XL
- Genuine FASS Fuel Systems replacement filters (Part Number FLP1000) built for diesel Drop-In applications
- Location diagram on each filter takes the guesswork out of proper placement and installation
-
- Complete pack: three (3) XWS3002 Extreme Water Separators and three (3) PF3001 Particulate Filters for multiple services
- XWS3002 rated at 2 microns absolute and traps over 99% of water — no separator drain needed
- PF3001 144-micron particulate filter cuts cavitation, increases flow, and lowers FASS system sound output
- Ideal for shops, fleets, or keeping the garage stocked with genuine FASS fuel filters
- Correct configuration: XWS3002 on the pressure side, PF3001 on the suction side of the pump
-
- Complete maintenance pack with three Extreme Water Separators and three Particulate Filters — enough for multiple service intervals
- XWS3002XL water separator rated at 2 micron absolute traps over 99% of water with no drain needed
- 144-micron PF3001XL particulate filter reduces cavitation, improves flow, and lowers system noise
- Ideal for shops or keeping your garage stocked for future fuel filter changes
- New-generation filters engineered to work together for reliable FASS Fuel System protection
-
- Complete FP1000 pack includes both required filters — the CWS1010 Coalescing Water Separator and the XWS3002XL Extreme Water Separator
- Engineered specifically for the FASS Fuel Drop-In System for a precise, no-guesswork fit
- Extreme water separation designed to protect your diesel fuel system from water and contaminants
- Simplifies fuel filter replacement for RAM and Ford drop-in units with one part number
- Sold as a ready-to-install pack — perfect for shops or keeping your garage stocked
- Formulated for Diesel applications with a printed location diagram for proper filter placement
-
- Complete service pack — includes two XWS3002 Extreme Water Separators and two PF3001 Particulate Filters for maintaining multiple FASS systems
- XWS3002 rated at 2 micron absolute traps over 99% of water, so no separator drain is needed
- 144 micron PF3001 on the suction side reduces cavitation, improves flow, and lowers system noise
- Perfect for stocking a shop or garage with matched replacement filters
- Clear placement guidance: XWS3002 on the pressure side, PF3001 on the suction side — see the on-filter diagram
-
- Complete pack includes both the XWS3002XL Extreme Water Separator and PF3001XL Particulate Filter for a full FASS fuel filter replacement in one buy
- 2 micron absolute water separator traps over 99% of water — no drain needed
- 144 micron particulate filter reduces cavitation, boosts flow, and lowers system noise on the suction side
- Matched components engineered to work together for correct pressure-side and suction-side placement
- Sold as a pack — keep your shop or garage stocked for routine diesel fuel filter service
-
- Fully adjustable fuel pressure lets you dial in the exact pressure your performance build requires
- Works with both gas and diesel applications for maximum versatility
- Built-in pre-drilled and tapped gauge port makes monitoring and adjusting simple — no guesswork
- Boost compensation port increases fuel pressure under acceleration when demand is highest
- Purpose-built for drag race, competition pulling, and high performance marine applications
- Universal Truck/SUV fitment, sold as each (Part No. FPR1001)
-
- Warms fuel as it passes through your FASS system and filters to aid cold-weather starts
- Prevents fuel gelling while parked and while driving in extreme cold
- Automatic on/off heater begins warming with the key on and shuts off at proper temperature
- Designed to fit FASS Titanium Series Systems, which include ports for two electric heaters
- Ships as a complete installation kit for a straightforward upgrade
- Purpose-built for Truck/SUV diesel owners facing brutal winter conditions
-
- Prevents diesel fuel gelling in extreme cold, protecting your FASS filters and aiding cold-weather starts
- Fully automatic: activates below 34°F and shuts off at operating temperature to avoid overheating fuel
- Dual electric heater probes fill both ports on Titanium Signature Series systems for maximum heating
- Warms fuel entering the system and helps warm tank fuel as the FASS continually polishes it
- True set-it-and-forget-it upgrade purpose-built for Titanium Signature Series Truck/SUV applications
-
- Delivers up to 500 watts of fuel-thawing power by combining the High Output Electric Heater Disk and Dual Electric Heater Probe Kit
- True thermostatic control turns elements on below 34°F and off at optimal temperature to prevent overheated fuel
- Prevents diesel gelling in your FASS filters and warms fuel in the tank for reliable cold-weather starts
- Genuine set-it-and-forget-it operation engineered for the coldest climates
- Premium Titanium Signature Series kit for Truck/SUV FASS Fuel Systems, sold as each
-
- Genuine FASS Fuel Systems splitter (Part No. HKS1001) for the Titanium and Titanium Signature Series
- Provides an easy, secure connection when running two dual FASS Electric Heater Probes
- Ties your electric heater probes together for a coordinated dual-probe setup
- Sold as a complete kit, ready to integrate into your FASS heater configuration
- Designed for Truck/SUV diesel applications on the FASS Titanium platform
-
- No-drill, no-cut bolt-on design mounts your FASS Titanium Lift Pump without damaging your Ford’s frame or body
- Complete kit includes everything necessary for a full installation
- Purpose-built for Ford Powerstroke diesel Trucks and SUVs
- Rigid bracket foot design keeps the pump securely positioned
- Proudly made in the USA by FASS Fuel Systems
- Sold as each for simple, straightforward ordering
-
- No-tank-drop installation thanks to the included Fuel Sump, drastically simplifying setup
- Bundled Titanium Signature Series Plus and Sump Kit for significant savings over buying separately
- Increases fuel lubricity at least 10 percent and can extend injection component life up to 3x
- Removes over 99 percent of water, eliminates air and vapor, and filters to 2 microns absolute
- Supports 600-1000hp Duramax builds with far more fuel flow than OEM
- Ultra-clean 6061 T-6 billet aluminum build with black anodized ORB fittings and black fuel line
Showing 49–72 of 290 results
