Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AEM-24-6017C Dual Chamber Intake System
$399.99
-
Titanium Signature Series Plus Fuel System for 1992-2000 for Silverado/Sierra Turbo Diesel 6.5L (Stock-600hp) FASS
$824.89
-
AIRAID Performance Air Intake System- 205-111
$449.99
-
Injen IS Short Ram Cold Air Intake System - IS1660 INJ-IS1660
$262.26
-
BBK MUSTANG 5.0 80MM POWER PLUS THROTTLE BODY - RACE ONLY
$259.99
Image
Product
Price
-
- Deep, aggressive Flow FX tone with a moderate-to-aggressive sound level inside and out
- All stainless steel mandrel-bent tubing and a straight-through muffler for maximum flow and power
- Dual 4.00-inch black ceramic coated stainless tips with embossed logo for a true muscle-truck look
- Bolt-on install using factory hangers, with all hardware and detailed instructions included
- CARB (California) compliant for emissions-legal peace of mind
- Fits 2015-2020 F-150 with 2.7L/3.3L/3.5L EcoBoost, 3.5L TiVCT or 5.0L engines
-
- Bolt-on axle-back installation using factory hangers with all hardware and instructions included
- Stainless steel 80 Series™ crossflow muffler paired with dual 2.50-inch mandrel-bent tailpipes
- Large 4.00-inch black ceramic-coated 304 stainless tips with embossed Flowmaster logo for a stealthy look
- Moderate exterior tone and mild interior sound for comfortable daily and trail driving
- CARB compliant and emissions-legal, fits 2018-2026 Jeep Wrangler JL 3.6L and 2.0L turbo
- Backed by the Flowmaster Lifetime Limited Warranty
-
- Deep, moderate Flow FX tone from a straight-through muffler design for great sound without excessive drone
- Durable 409 stainless steel construction with 2.50-inch mandrel-bent pipes for improved exhaust flow
- Custom look thanks to a 3.50-inch black ceramic-coated 304S stainless steel tip with embossed logo
- Bolt-on install using all factory hanger locations, with instructions and hardware included
- CARB (California) compliant and backed by Flowmaster’s lifetime Limited Warranty
- Direct fitment for the 2007-2014 Toyota FJ Cruiser
-
- Bolt-on cat-back kit uses factory hangers and includes all hardware and detailed instructions for easy at-home installation
- Dual 2.50-inch mandrel-bent stainless inlet tubes and a Flow FX straight-through muffler unlock smooth, performance-focused flow
- Delivers a deep, powerful exterior tone with a deep, mellow sound inside the cab
- Finished with large 4.00-inch double-wall black ceramic coated stainless tips and a laser-etched logo
- Emissions legal and CARB (California) compliant for street-legal peace of mind
- Engineered specifically for 2009-2021 Toyota Tundra 4.6L, 4.7L or 5.7L models with a 145-inch wheelbase
-
- Flowmaster Force II axle-back exhaust engineered to fit 2018-2026 Jeep Wrangler JL with the 3.6L V6 or 2.0L turbo
- Moderate exterior tone and mild interior sound for performance without cabin drone
- Stainless steel 80 Series cross-flow muffler with dual 2.50-inch mandrel-bent tailpipes and 4.00-inch polished tips
- True bolt-on install using factory hangers, with all parts, hardware, and instructions included
- CARB (California) compliant, emissions-legal Dual Out Rear system
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Flow FX straight-through performance muffler unlocks flow for added power and a deep, aggressive sound
- 409S stainless steel mandrel-bent tubing resists corrosion and keeps exhaust flowing freely
- Dual 2.50-inch tailpipes with 4.00-inch black ceramic coated 304 stainless tips exit in front of the rear tire for a muscle-truck look
- Bolts on using factory hangers and includes all hardware and detailed instructions for easy installation
- CARB (California) compliant for a street-legal upgrade on 2014-2019* Classic body Silverado 1500 and Sierra 1500
- Fits 4.3L and 5.3L Crew Cab and Double Cab models for a dialed-in, moderate-to-aggressive tone
-
- Outlaw® Series dual mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing plus quad 4.00-inch black ceramic coated 304 stainless tips
- Includes valves to work with your factory active exhaust actuators for on-demand sound
- Bolts on using factory hangers with all parts, hardware, and instructions for at-home installation
- CARB (California) Compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2023 Mustang GT 5.0L (Active Performance Exhaust) coupes and convertibles
-
- Race-proven Outlaw Series mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing for high flow, durability, and longevity
- Quad 4.00-inch polished stainless steel tips with embossed logo for an aggressive, attention-grabbing look
- Includes valves to reuse your factory exhaust actuators, preserving on-demand active exhaust control
- Bolts on using factory hangers with all hardware and detailed instructions for an easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Flow FX sound with a moderate everyday tone thanks to the straight-through muffler design
- Durable 409 stainless steel construction throughout for lasting corrosion and heat resistance
- Large 4.50-inch black ceramic-coated 304S stainless tips with embossed logo for a custom look
- Side-exit dual 2.50-inch tailpipes direct exhaust away from your boat or trailer when towing
- Bolt-on install using factory hangers, with an added hanger, hardware, and instructions included
- CARB compliant and engineered specifically for 2009-2013 Silverado/Sierra 1500 5.3L trucks
-
- Adds max dyno gains of 4 hp and 4 lb-ft at the rear wheels over stock
- Mandrel-bent 2.5-inch 409 stainless steel tubing for maximum flow and durability
- Flow FX muffler delivers a moderate, street-friendly exhaust note
- Larger 3.50-inch black ceramic-coated tips with embossed logo for a custom look
- Bolt-on install using factory hangers and included hardware — fits models with rear bumper exhaust bezels
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel construction with dual 2.50-inch mandrel-bent tubing for durability and smooth flow
- Scavenger X-Pipe and Flow FX straight-through mufflers produce a deep, aggressive tone with a moderate interior sound level
- Purpose-built for the 2011-2014 Dodge Charger R/T and Chrysler 300C 5.7L Hemi
- Uses factory hangers and exits within factory bezels for a stealthy, OEM-style look with easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Full stainless steel construction with dual 2.50-inch mandrel-bent tubing for lasting durability and smooth flow
- Scavenger Series X-Pipe and straight-through Flow FX mufflers deliver a deep, aggressive tone with a moderate interior sound level
- Mounts to factory hangers and exits through factory bezels for a stealthy, OE-style look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all necessary parts, hardware and detailed instructions for an easy at-home install
- Purpose-built for the 2009-2014 Dodge Challenger R/T 5.7L Hemi
-
- Complete true dual crossmember-back exhaust built specifically for 1968-1972 GM A-body V8 vehicles
- 2.50-inch mandrel-bent stainless steel tubing plus a built-in H-pipe improves throttle response, power, and mileage
- Large-case Super 40 Series mufflers deliver an aggressive interior and exterior tone
- Dual 2.50-inch tailpipes exit at a slight down angle under the rear bumper for a muscular look
- Includes all hangers and hardware needed for installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Flow FX sound from a single inlet/dual outlet straight-through muffler
- Durable 409 stainless steel construction built for years of trouble-free service
- Custom look with dual 4.50-inch black ceramic-coated 304 stainless steel tips through the factory bumper cutouts
- Easy at-home install using all factory hanger locations — no cutting or welding required
- CARB (California) compliant and fits 2WD/4WD models in all cab and bed configurations
- Includes the Flow FX muffler, installation instructions, and all necessary hardware
-
- Deep, moderate performance sound from the Flow FX straight-through muffler without excessive cabin drone
- 409S stainless steel construction plus a black ceramic-coated 304S stainless tip for lasting durability and custom looks
- Bolts to all factory hanger locations for a simple, at-home installation with included hardware and instructions
- 3.00-inch mandrel-bent tailpipe promotes smooth, unrestricted flow for maximum performance
- CARB (California) compliant, so it’s street-legal in emissions-strict states
- Fits 2014-2019 Silverado/Sierra 4.3L and 5.3L trucks in 2wd and 4wd configurations
-
- Deep, powerful exterior tone with a moderate in-cab sound from the straight-through Flow FX muffler
- 3-inch mandrel-bent stainless steel tubing bolts directly to the factory catalytic converter flange
- Finished with a large 4.50-inch black ceramic coated tip embossed with the Flowmaster name
- Uses factory hanger locations and includes all parts, hardware, and instructions for easy at-home installation
- CARB (California) compliant and fits 2WD/4WD F-150s across all wheelbases (2009-2014, 3.5L EcoBoost/4.6L/5.0L/5.4L)
-
- Replaces restrictive factory manifolds to improve throttle response, power, and engine efficiency
- 50-state legal for 2004-2010 5.4L Ford Mod Motor applications with CARB EO# D-698-18
- Stainless steel construction with durable Silver Ceramic coating for heat and corrosion resistance
- 3/8 inch laser-cut flanges and D-port inlets deliver a precise, leak-free direct-fit installation
- Includes collector, gaskets, and hardware for a complete, straightforward install
- Shorty design with 1-5/8 inch unequal-length primaries and a 2.50 inch outlet for strong scavenging
-
- Durable 409 stainless steel construction with 16-gauge 2.5-inch mandrel-bent tubing for unrestricted flow
- Straight-through Flow FX mufflers deliver a deep, powerful exterior tone while keeping interior sound very mild
- Stock-style polished stainless steel dual tailpipes with laser-etched Flowmaster logo for the classic 5.0 look
- Bolts to factory hanger locations and includes all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Complete cat-back kit with mufflers included — a purpose-built fit for 1986-1993 Mustang LX (1986 GT) 5.0L
-
- Delivers a moderate, deep, and powerful exhaust note from a straight-through Flow FX performance muffler
- 409 stainless steel construction with 16-gauge 2.50-inch mandrel-bent tubing for durability and unrestricted flow
- Tailpipe tucks high in the undercarriage to resist crushing on rocky, off-road terrain
- Bolt-on install using factory hanger locations, with all hardware and detailed instructions included
- CARB compliant and 50-state legal, finished with a 3.50-inch black ceramic coated 304 stainless tip
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Replaces restrictive factory manifolds to improve throttle response, power and engine efficiency
- Stainless steel construction with durable silver ceramic coating to handle heat and last
- 1-5/8 in. unequal-length primaries, 16-gauge tubing and 3/8 in. laser-cut flanges for a tight, leak-free seal
- Includes collectors, gaskets and M8 hardware for an easy, direct-fit installation
- 50-state legal with CARB E.O. #D-698-20 for 2002-2013 4.8L/5.3L and 2007-2013 6.0L/6.2L LS applications
-
- Full stainless steel construction with silver-finished mufflers and pipes for lasting durability and corrosion resistance
- Dual 2.50-inch mandrel-bent tubing and a Scavenger X-Pipe cross-over maximize exhaust scavenging and performance
- Flow FX straight-through mufflers deliver a deep, aggressive exterior tone with a moderate interior sound level
- Bolts to factory hangers and exits through factory bezels for a stealthy, direct-fit look on the 2015-2016 Challenger R/T 5.7L Hemi
- CARB compliant and 50-state legal, backed by Flowmaster’s Lifetime Limited Warranty
- Complete kit includes all necessary parts, hardware, and detailed instructions for an easy at-home installation
-
- Mandrel-bent 2.50-inch stainless steel tubing delivers smooth, free-flowing true dual exhaust
- Custom designed for 1959-1964 Chevrolet Impala, Biscayne and Bel Air (2WD)
- Pipes-only design lets you pick the exact Flowmaster mufflers and sound level you want
- Pre-welded hangers and included instructions make installation straightforward
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Durable 409 stainless steel construction throughout for long-term corrosion resistance
- Flow FX straight-through muffler delivers a deep, aggressive-to-moderate performance sound
- Dual 2.50-inch mandrel-bent tailpipes exit at the side to direct exhaust away from boats and trailers while towing
- Large 4.50-inch black ceramic coated 304S stainless tips with embossed logo add a custom look
- Uses factory hangers plus an included extra hanger, with all hardware and instructions for an easy at-home install
- CARB (California) compliant and built to fit 143.5-inch, 153-inch wheelbase and 2019 Classic body models
-
- 3-inch mandrel-bent tubing and a straight-through Flow FX muffler deliver smooth, high-flow performance
- Deep, powerful sound outside the truck with a moderate, livable tone inside the cab
- Finished with a large 4.50-inch black ceramic coated tip embossed with the Flowmaster name
- CARB (California) compliant with Emission Code 5 for street-legal confidence
- Bolts to factory hanger locations and includes all hardware and instructions for easy at-home install
- Fits 5.7L Hemi Ram 2500/3500 and 1500 Mega Cab across all 2WD/4WD setups and wheelbases
Showing 241–264 of 500 results
