Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
aFe Power 
Flowmaster 
Mishimoto Latest Products
-
Flowmaster American Thunder Cat-back Exhaust System
$766.54
-
AIRAID Performance Air Intake System- 300-125-1
$349.99
-
Magnum FLOW Pro DRY S Air Filter24-91203D 4-1/2 IN F x (8x6-1/2) IN B x (6-3/4x5-1/2) IN T (Inverted) x 8 IN H
Price range: $91.00 through $104.00
-
JLT CAI-FME-15-1 Cold Air Intake Kit 18-21 Mustang EcoBoost 2.3L No Tuning Required
$329.00
-
21-26 Ford F-150 Exhaust System Kit
$1,273.62
Image
Product
Price
-
- Constant “valve open” mode delivers rich, rowdy tones at all times
- T304L Stainless Steel Cat Back system with a 13 lb weight savings (with AWE mid-pipes)
- Quad 4.5″ double-walled slash-cut tips in Chrome Silver or Diamond Black
- Includes AWE valve simulators — No Tune Required and a No CEL Guarantee
- 50 State Legal voluntary label plus an AWE Fit Guarantee
Quickview
-
- Complete on-demand control to open and close your SwitchPath™ exhaust valves from a simple remote
- Intuitive push-button operation — ‘On’ to open, ‘Off’ to close for instant sound changes
- No tune required and hardware included for a clean, straightforward upgrade
- No CEL Guarantee means valve control without a check engine light
- Fit Guarantee for your Audi B9 3.0 AWD Coupe, Hatchback, or Sedan
- 50 State Legal Voluntary Label for added peace of mind
Quickview
-
- Open or close your exhaust valves on demand from inside the cabin with a simple push-button remote
- Works with both the stock exhaust and the appropriate AWE SwitchPath™ Exhaust
- Complete kit includes two remotes, wiring harness, control box, and mounting hardware
- No tune required, plus a Fit Guarantee and No CEL Guarantee for peace of mind
- Compact remote design fits easily on a keychain or in a cup holder
- Carries a Voluntary Label as 50 State Legal
Quickview
-
- Adds 5 horsepower and 5 lb-ft of torque at the crank by removing the restrictive OE rear muffler
- Sheds 6.5 lbs versus the factory center muffler for lighter, freer exhaust flow
- Handbuilt from durable T304L stainless steel for a premium, award-winning performance exhaust
- No tune required, hardware included, and simple to install
- Backed by AWE’s Fit Guarantee and No CEL Guarantee, with 50 State Legal labeling
Quickview
-
- Engineered specifically for the 2011 Audi A3 Base (2.0, FWD) with a Fit Guarantee
- Durable T304L stainless steel construction built to resist corrosion
- No CEL Guarantee and no tune required for a true bolt-on upgrade
- 2.5-inch diameter tuned to preserve low-end torque while opening up the top end
- Chrome Silver tips and T-bolt slip joints for clean looks and precise alignment
- 50 State Legal, non-valved Performance Edition cat-back system
Quickview
-
- 180 Technology® drone-canceling design delivers an aggressive tone with zero highway drone
- Handcrafted in the USA from durable US-sourced T304L Stainless Steel
- Backed by a Fit Guarantee and No Check Engine Light guarantee for worry-free bolt-on installation
- No tune required and 50 State Legal, so it’s road-ready right out of the box
- Two double-walled 80mm Diamond Black tips add a clean, blacked-out finish
- True straight-through axle back concept with 3-inch tubing for a purposeful exhaust note
Quickview
-
- Dyno-verified Cat Back exhaust that unlocks approximately 8 hp at the crank on the 2.5L engine
- Mandrel-bent 2.5 inch tubing and thick .065″ wall T304L stainless steel for flow and long-term durability
- Dual double-walled, adjustable Chrome Silver tips (3 inch) that resist heat discoloration
- Refined sound with no interior drone at any RPM — noticeable yet civilized
- No tune required, plus a No CEL Guarantee and AWE Fit Guarantee
- 50 State Legal Performance Edition built for the VW Hatchback 2.5
Quickview
-
- Full 3-inch mandrel-bent T304L stainless steel cat-back for smooth, durable flow
- Engineered opening between the banks unlocks a high-pitched, goosebump-inducing exotic tone
- OE-quality quarter-inch dual-layer waffled Inconel heat shielding with 3000°F matting protects body panels
- Re-uses factory exhaust tips for a clean, OEM-plus appearance
- 50 State Legal with a No CEL Guarantee and no tune required
- Backed by AWE Tuning’s Fit Guarantee for McLaren 3.8 RWD Convertible and Coupe
Quickview
-
- Handcrafted from premium T304L Stainless Steel for lasting durability and a premium finish
- Touring Edition tuning stays civil at idle and cruise, then unleashes a full-throttle war-cry wail
- AWE 180 Technology cancels resonance for a clean, drone-free cabin
- No Tune Required and backed by both a Fit Guarantee and No CEL Guarantee
- Quad 4-inch Chrome Silver tips deliver unmistakable presence
- 50 State Legal and valve-less for straightforward, worry-free ownership
Quickview
-
- Bespoke X-pipe design delivers a smooth, sophisticated exotic tone tuned for the high-revving 4.0L V8
- Unlocks significant mid-range and top-end power gains when paired with AWE Performance Downpipes
- Durable T304L Stainless Steel construction with articulating flex sections to combat torque flex
- Reuses factory OE tips for a stealthy, stock-appearance rear end
- 50 State Legal with a No CEL Guarantee and AWE Fit Guarantee — no tune required
- Non-valved 3-inch Cat Back system engineered specifically for the 18-23 McLaren 720S Base Coupe
Quickview
-
- Premium T304L Stainless Steel Cat Back construction for lasting durability
- Two 102mm Chrome Silver double-walled tips stamped with the AWE logo
- Aggressive at full throttle yet civil for daily cruising, engineered to eliminate unwanted frequencies
- No tune required, with a No CEL Guarantee and Fit Guarantee for a confident install
- 50 State Legal voluntary label and Porsche 2.7/3.4 RWD specific fitment
Quickview
-
- AWE 180 Technology® with a straight-through resonator delivers a smooth European tone at part throttle and an aggressive note at wide-open throttle
- Durable T304L Stainless Steel construction with 2.5″ tubing for long-lasting performance
- Dual outlet design with two 4″ Chrome Silver tips — one on each side for a clean, upgraded look
- No tune required and no valves — simple bolt-on with all hangers, clamps, bolts, and paste included
- Backed by AWE’s Fit Guarantee and No CEL Guarantee, plus 50 State Legal voluntary labeling
Quickview
-
- True cat-back performance exhaust built from mandrel-bent T304L stainless steel at a full 3″ diameter throughout for smooth, unrestricted flow
- Balance opening between the banks unlocks an exotic, high-pitched wail with a note that’s both hard-hitting and refined
- No tune required and no valves — a clean, direct cat-back fit for the 12-14 McLaren MP4-12C (Convertible & Coupe, 3.8, RWD)
- Dual logo tips in a high-profile bare stainless steel machined finish echo factory geometry
- Backed by AWE’s Fit Guarantee, No CEL Guarantee, and a 50 State Legal voluntary label
Quickview
-
- Same in-house T304L stainless construction and power gains as the Touring Edition, at a lower price
- 180 Technology™ rear-mufflers removed for a louder, more aggressive mid-range tone
- Quad 3.5″ chrome silver tips deliver a premium finished look with 2.5″ tubing throughout
- No tune required plus a No CEL Guarantee and Fit Guarantee for a confident install
- 50 State Legal voluntary label and vehicle-specific fitment for the 12–17 S5 Coupe 3.0T AWD
- Pair with AWE Resonated or Non-Resonated Downpipes to dial in your exact volume
Quickview
-
- 180 Technology® cancels drone for a refined, comfortable exhaust note at cruise
- Durable T304L stainless steel construction with dual 3.5-inch Chrome Silver tips
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- 50 State Legal and covered by AWE’s Fit Guarantee
- Confirmed to fit both RWD and X Drive (AWD) BMW models
- Axle-back design engineered specifically for the BMW F30 335i
Quickview
-
- 180 Technology® drone-canceling solution delivers the perfect exhaust note without highway drone
- Durable T304L Stainless Steel build with 3-inch tubing and dual 4-inch Chrome Silver tips
- No tune required and backed by a No CEL Guarantee, so it won’t trigger a check-engine light
- AWE Fit Guarantee confirmed for both RWD and X Drive (AWD) BMW models
- 50 State Legal voluntary labeling for confident, compliant installation
- Axle-back design engineered from decades of European performance experience for the BMW F30 335i
Quickview
-
- 180 Technology® drone-canceling design delivers an aggressive yet completely drone-free exhaust note
- Durable T304L Stainless Steel construction built to resist corrosion and last
- Two 4-inch Chrome Silver double-wall tips with AWE logo hold a mirror finish under hard use
- Individually adjustable tips let you set the perfect depth into the bumper
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- AWE Fit Guarantee plus a 50 State Legal label for confident, compliant fitment
Quickview
-
- 180 Technology® actively cancels drone for a clean, aggressive exhaust note you can live with daily
- Durable T304L Stainless Steel construction with 3-inch tubing for lasting quality
- Two 3.5-inch Chrome Silver double-walled tips with the AWE logo hold a mirror finish under hard use
- Individually adjustable tips let you set the exact bumper depth to match your taste
- No tune required, No CEL Guarantee, and a Fit Guarantee for a confident install
- Confirmed fitment for manual, automatic, RWD and xDrive vehicles — 50 State Legal
Quickview
-
- 180 Technology® drone-canceling solution delivers an aggressive yet drone-free exhaust note
- T304L Stainless Steel build with 3″ tubing for lasting durability and corrosion resistance
- Two 4″ Diamond Black double-walled tips with AWE logo keep a mirror finish under hard use
- Individually adjustable tips let you set the perfect depth into the bumper
- No tune required, backed by a Fit Guarantee and No CEL Guarantee for hassle-free install
- 50 State Legal Touring Edition axle back system built for the BMW Coupe 3.0 B58
Quickview
-
- 180 Technology® drone-canceling design delivers an aggressive yet drone-free exhaust note
- Durable T304L Stainless Steel construction with 3-inch tubing for lasting performance
- Dual 3.5-inch Chrome Silver tips with double walling keep a mirror finish under hard use
- Individually adjustable tips let you set bumper depth to your personal taste
- No tune required plus a No CEL Guarantee for a clean, hassle-free upgrade
- Fits manual and automatic, RWD and xDrive AWD models, backed by AWE’s Fit Guarantee
Quickview
-
- 180 Technology® drone-canceling design delivers a clean, drone-free exhaust note for comfortable cruising and purposeful throttle response
- Durable T304L Stainless Steel build with 3-inch tubing and dual 4-inch double-walled Chrome Silver tips that hold a mirror finish
- Individually adjustable tips let you set the exact depth into the bumper to match your personal taste
- 50 State Legal with a No CEL Guarantee — no tune required and no valves to manage
- Fit Guarantee confirmed for manual and automatic, RWD and xDrive 3.0 B58 Convertible, Coupe, and Sedan models
Quickview
-
- Bespoke X-pipe design tuned for the 720S high-revving 4.0 V8 delivers a smooth, exotic tone
- T304L Stainless Steel cat-back construction with articulating flex sections to combat torque flex
- Significant mid-range and top-end power gains when paired with AWE Performance Downpipes
- Two 102mm double-walled Chrome Silver tips featuring the AWE logo
- No tune required, No CEL Guarantee, and 50 State Legal for hassle-free installation
- Backed by the AWE Fit Guarantee for precise, factory-correct fitment
Quickview
-
- Straight-through resonator with AWE 180 Technology delivers a smooth European tone that’s civil at part throttle and aggressive at full throttle
- T304L Stainless Steel construction with dual 4-inch Diamond Black tips for lasting durability and bold looks
- No tune required and 50 State Legal with a No CEL Guarantee – a hassle-free, compliant upgrade
- Includes all hangers, clamps, bolts, and paste for a simple installation
- Backed by AWE’s Fit Guarantee for the 09-17 Volkswagen CC 2.0T Sedan (FWD)
Quickview
-
- Track Edition straight-pipe design with no valves delivers a completely unfiltered, aggressive exhaust note
- Built from durable T304L Stainless Steel with 2.5-inch tubing for lasting performance
- Two 102mm slash-cut, double-walled Chrome Silver tips with AWE logo hold a mirror finish under hard use
- Individually adjustable tips let you set bumper depth to your personal taste
- Direct Cat Back fitment for Porsche 2.0/2.5 with no tune required and no CEL
- Backed by AWE’s Fit Guarantee, No CEL Guarantee, and 50 State Legal label, with an easy Touring Edition conversion path
Quickview
Showing 1–24 of 523 results
