Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
aFe Power 
Flowmaster 
Mishimoto Latest Products
-
22-23 Dodge Challenger (6.2) Computer Chip Programmer
$1,984.46
-
2021 Ram 1500 (5.7) Computer Chip Programmer
$1,927.75
-
BBK 1998-2002 GM LS1 CAMARO/FIREBIRD 04 GTO 80MM THROTTLE BODY
$469.99 $499.99 -
Mishimoto 3.5in Straight Coupler, Blue - Air Intake System
$10.95
-
Audi (3.0) Exhaust System Kit
$1,244.78
Image
Product
Price
-
- Converts your Touring Edition rear section to a straight-through Track Edition for a more aggressive exhaust tone
- Durable T304L Stainless Steel construction with 3-inch tubing diameter
- No tune required and backed by a No CEL Guarantee for worry-free installation
- Precision-fit for 17-20 Honda Civic Si Coupe/Sedan (1.5, FWD) with AWE Fit Guarantee
- Carries a 50 State Legal voluntary label
Quickview
-
- Converts your SwitchPath™ setup to straight-through, unfiltered Track Edition rear sections — cranked to 11 at all times
- Built from durable T304L Stainless Steel with a 2.5-inch tubing diameter
- No Tune Required — install and drive with no additional programming
- Backed by a Fit Guarantee and No CEL Guarantee for confident installation
- Carries a 50 State Legal Voluntary Label
- Purpose-built for the 2015-2017 VW Golf R Base (Hatchback, 2.0, AWD)
Quickview
-
- Patented 180 Technology® resonators cancel cabin drone while keeping straight-through flow
- Converts resonated Track Edition mid pipes to non-resonated mids for a more open sound
- Built from durable T304L Stainless Steel with 3-inch tubing for the GR Supra 3.0
- No Tune Required and backed by a No CEL Guarantee for hassle-free installation
- AWE Fit Guarantee and 50 State Legal voluntary labeling for peace of mind
Quickview
-
- Straight-through, unfiltered Track Edition rear sections replace the rear muffler and valve section for a raw, aggressive exhaust note
- Built from durable T304L Stainless Steel with a 2.5-inch tubing diameter for lasting performance
- No Tune Required — install and drive without additional calibration
- Backed by a Fit Guarantee and No CEL Guarantee for peace of mind
- 50 State Legal under its Voluntary Label
- Purpose-built SwitchPath™-to-Track Conversion for Audi and Volkswagen 2.0 AWD Hatchback and Sedan models
Quickview
-
- Converts your existing AWE Touring Edition Cat Back into a louder Track Edition setup
- Built from durable T304L Stainless Steel with 2.5-inch tubing
- No tune required and backed by a No CEL Guarantee for hassle-free installation
- Swaps 180 Technology® axlebacks for Track Edition straight sections for a bolder tone
- Carries a Voluntary 50 State Legal label and AWE Fit Guarantee
- Cost-effective upgrade path that keeps the hardware you already own
Quickview
-
- Converts AWE resonated mid pipes to non-resonated for a louder, more aggressive sound
- Built from premium T304L Stainless Steel for lasting corrosion resistance
- 3-inch tubing diameter engineered for strong flow and tone
- No tune required and backed by a No CEL Guarantee for hassle-free install
- 50 State Legal and covered by AWE Tuning’s Fit Guarantee
- Model-specific fitment for BMW Coupe/Sedan 3.0 in AWD and RWD
Quickview
-
- Converts your existing AWE Touring Edition catback into an aggressive Track Edition by swapping just the rear sections
- Built from durable T304L Stainless Steel with 3-inch tubing for strong, unrestricted flow
- No tune required and backed by a No CEL Guarantee for a clean, worry-free install
- AWE Fit Guarantee ensures precise fitment on 3.0 Coupe/Sedan AWD and RWD models
- Rated 50 State Legal under its voluntary emissions label
Quickview
-
- Converts your AWE Touring Edition Cat Back into an aggressive Track Edition setup
- Crafted from durable T304L stainless steel with 3-inch tubing for high-flow performance
- No tune required and backed by a No CEL Guarantee for hassle-free installation
- 50 State Legal and covered by an AWE Tuning Fit Guarantee
- Model-specific fitment for the 2019-2025 Audi RS5 Sportback (2.9)
Quickview
-
- Converts an AWE Touring Edition Cat Back into a Track Edition by swapping the rear sections
- Built from durable T304L Stainless Steel with 3-inch tubing for strong flow
- No tune required and backed by a No CEL Guarantee for hassle-free installation
- Removes 180 Technology sections to deliver the louder, more aggressive Track Edition tone
- Model-specific fitment for the 2018-2024 Audi RS5 (2.9) with AWE Fit Guarantee
- 50 State Legal voluntary label
Quickview
-
- Converts your Touring setup to an aggressive Track Edition sound with straight-through rear sections
- No Tune Required — a true bolt-on upgrade with new hardware included
- Durable T304L Stainless Steel construction with a 3-inch tubing diameter
- Backed by a No CEL Guarantee and Fit Guarantee for confident installation
- 50 State Legal, so you can upgrade the exhaust system without compliance worries
- Simple swap — unbolt the old rear sections, bolt on the new, and reuse your existing tips
Quickview
-
- Converts your existing AWE Touring Edition Cat Back by swapping in 180 Technology® rear sections
- Built from durable T304L Stainless Steel with a 2.5 tubing diameter
- No tune required and backed by a No CEL Guarantee for worry-free installation
- 50 State Legal per its Voluntary Label and covered by the AWE Fit Guarantee
- Designed for Audi Sedan 3.0 AWD cars configured for AWE 90mm tips
Quickview
-
- Premium T304L Stainless Steel construction for long-term corrosion resistance and durability
- Conversion Kit that upgrades your existing AWE Touring Edition Cat Back with a rear swap
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- 50 State Legal with an AWE Fit Guarantee for confident ordering
- Engineered around 2.5-inch tubing for Audi Coupe/Sedan 3.0 configured for AWE 102mm tips
Quickview
-
- Straight-through, unfiltered Track Edition rear sections deliver an aggressive, always-on exhaust note
- Durable T304L Stainless Steel construction built to last
- 3-inch tubing sized for the M5’s 4.4 engine
- No tune required and a No CEL Guarantee for hassle-free installation
- Fit Guarantee and 50 State Legal voluntary labeling for added confidence
- Purpose-built conversion for the 2018-2023 BMW M5 Sedan (4.4 AWD)
Quickview
-
- Converts your AWE Center Muffler Delete into a full valved AWE SwitchPath™ Exhaust
- Sheds up to 48 lbs versus the 65 lb factory exhaust — the complete system weighs just 17 lbs with tips
- T304L stainless steel with 0.65″ wall delivers a deep, refined exotic tone even with valves closed
- Retains factory valve operation, evolving from sophisticated street car to roaring Cup Car
- No tune required, plus a No CEL Guarantee and AWE Fit Guarantee
- 50 State Legal for the 2016-2019 Porsche 911 (4.0)
Quickview
-
- Valved SwitchPath™ Mufflers replace the rear Track Edition straight sections for on-demand sound control
- Retains factory valve behavior and on-board controls — no aftermarket switch needed
- Durable T304L Stainless Steel construction with a 3-inch tubing diameter
- No tune required, backed by a No CEL Guarantee for a worry-free install
- Fit Guarantee and 50 State Legal voluntary labeling for the 4.0 RWD AMG sedan
Quickview
-
- Valved SwitchPath™ Mufflers let you take full control of your AMG’s sound on demand
- Retains factory valve behavior and on-board controls—no aftermarket switches needed
- Durable T304L Stainless Steel construction with 3-inch tubing
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- AWE Fit Guarantee for a precise, bolt-on fit on the Coupe 4.0 RWD
- 50 State Legal voluntary labeling for straightforward compliance
Quickview
-
- SwitchPath™ Conversion Kit pairs a bespoke muffler with a valved straight section for tone you control
- Factory valve behavior and interior control retained through Audi Drive Select
- Built from durable T304L stainless steel with a 2.5-inch tubing diameter
- 50 State Legal with a No CEL Guarantee and No Tune Required
- Backed by AWE Tuning’s Fit Guarantee for a confident, application-specific install
Quickview
-
- Valved conversion kit with a bespoke driver’s-side muffler and a valved passenger’s-side straight section for a purpose-built sound
- Retains factory valve behavior controlled through your driving modes—quiet when you want it, aggressive when you don’t
- Built from durable T304L stainless steel with 2.5-inch tubing sized for the Golf R 2.0 AWD platform
- 50 State Legal with a No CEL Guarantee and no tune required for a hassle-free install
- Backed by an AWE Fit Guarantee, engineered specifically for the 2015-2017 Golf R Base hatchback
- Add the AWE SwitchPath™ Remote (sold separately) for complete on-demand control over the exhaust valve
Quickview
-
- Valved conversion kit lets you retain factory valve behavior and control your sound through driving modes
- Premium T304L stainless steel construction for lasting corrosion and heat resistance
- No tune required and backed by a No CEL Guarantee for a hassle-free install
- 50 State Legal voluntary labeling plus an AWE Fit Guarantee for your Audi/VW 2.0 AWD
- Bespoke driver’s-side muffler paired with a valved passenger’s-side straight section
- Pairs with the optional AWE SwitchPath™ Remote for complete on-command valve control
Quickview
-
- Valved tip merges let you control exhaust volume through the factory on-board controls
- Track-to-SwitchPath™ Conversion delivers switchable sound — aggressive or refined on demand
- Durable T304L Stainless Steel construction with 3-inch tubing for high-performance flow
- No tune required and backed by a No CEL Guarantee for a clean, hassle-free install
- 50 State Legal and covered by the AWE Fit Guarantee for the 18-23 BMW M5 4.4 AWD Sedan
Quickview
-
- AWE Marking Template guides a precise bumper cut so you get it right the first time
- Purpose-built to help AWE quad-tip systems fit with a clean, factory-integrated look
- Hardware included and no tune required for a straightforward install
- Backed by a Fit Guarantee and No CEL Guarantee for confident fitment
- 50 State Legal voluntary labeling
- Fits BMW Convertible, Coupe, and Hatchback 2.0 in AWD or RWD
Quickview
-
- Precision AWE Marking Template lets you cut your bumper perfectly the first time—measure twice, cut once
- Ensures AWE quad tip systems fit like factory, with clean, symmetrical results
- Complete hardware kit with all hardware included—no tune required
- Backed by AWE’s Fit Guarantee for confident installation
- 50 State Legal voluntary label with a No CEL Guarantee
Quickview
-
- Precision AWE marking template lets you cut your bumper perfectly the first time
- Achieves the true AWE quad tip look with a clean, factory-correct fit
- Complete kit with all necessary hardware included
- No tune required and backed by a No CEL Guarantee
- 50 State Legal and covered by AWE’s Fit Guarantee
- Purpose-built for BMW Sedan and Wagon 2.0 AWD/RWD applications
Quickview
-
- Converts your existing AWE Touring Edition into an AWE Track Edition exhaust system
- Built from durable T304L Stainless Steel with 3-inch tubing for strong flow
- No tune required — install and drive with the No CEL Guarantee for a clean dash
- Backed by AWE Tuning’s Fit Guarantee for precise, model-specific fitment
- 50 State Legal, purpose-built for the 22-26 Audi S3 Sedan 2.0 AWD
Quickview
Showing 337–360 of 523 results
