Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
aFe Power AFE-72-90084 Momentum Intake Replacement Air Filter w/ Pro GUARD 7 Media 4 IN F x 6 IN B x 4-3/4 IN T x 8-1/2 IN H
$97.00
-
aFe Power AFE-24-23002 Magnum FLOW Universal Air Filter w/ Pro 5R Media 2-1/4 IN F x 6 IN B x 4-3/4 IN T x 6 IN H
$71.00 $88.75 -
21-23 Ford Mustang Mach 1 (Coupe - 5.0 - RWD) Exhaust System Kit
$2,978.88
-
Flowmaster Delta Force Cold Air Intake Kit - FLM-315121
$899.99
-
AIRAID Performance Air Intake System- 314-313
$349.99
Image
Product
Price
-
- Dyno-proven power gains of +9 hp and +12 lb-ft at the rear wheels
- Durable 409 stainless steel construction with a Lifetime Limited Warranty
- Flow FX straight-through muffler delivers a moderate tone with maximum performance
- 4.50-inch black ceramic tips and dual side-exit design for an aggressive custom look
- Bolt-on install using factory hangers, with all hardware and instructions included
- CARB compliant (Emission Code 5) and legal in all 50 states
-
- Adds max dyno gains of 13 hp and 16 lb-ft of torque at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Flow FX muffler delivers an aggressive-to-moderate exhaust tone
- Larger 4.50-inch black ceramic-coated tip with embossed logo for a custom look
- Bolt-on install using factory hangers with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Flow FX muffler tone with increased performance over the restrictive factory exhaust
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and lasting durability
- Bolts on using factory hangers and included hardware for a quick, straightforward install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Direct-fit cat-back designed specifically for 1992-1995 Chevy Blazer and GMC Jimmy 5.7L (4WD)
- Super 50 Series muffler delivers a deep, powerful tone with mild-to-moderate cabin sound and moderate exterior volume
- Full 3.00-inch mandrel-bent aluminized steel inlet and tailpipe for efficient exhaust flow
- Bolt-on installation using factory hanger locations, U-bolt clamps, and all necessary hardware included
- CARB compliant and emissions-legal, backed by Flowmaster’s 3-year Limited Warranty
- Angle-cut turn-down tip exits behind the right rear wheel for a clean, aggressive look
-
- Aggressive exterior tone with a moderate interior sound thanks to the aluminized steel Super 50 Series muffler
- Heavy 16-gauge mandrel-bent aluminized steel tubing for durability and maximum performance
- Dual 2.50-inch tailpipes clear the factory spare tire and exit straight out back for a muscular look
- Complete cat-back system includes all parts, hardware, and instructions for easy at-home installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Flowmaster Outlaw axle-back exhaust engineered for 2014-2019 Corvette C7 6.2L Coupes and Convertibles
- All stainless steel construction with 3.00-inch mandrel-bent tubing for lasting flow and durability
- Quad 4.00-inch 304 stainless steel tips with embossed logo deliver a true performance look
- Deep moderate/aggressive exterior tone paired with a pleasant, drivable cabin sound
- Retains factory AFM valves and reuses the OEM actuator, mounting on factory hangers for a clean install
- CARB (California) compliant with the muffler included in the kit
-
- Complete true dual crossmember-back kit with 2.50-inch mandrel-bent stainless steel tubing for maximum flow
- Dual Super 44 Series mufflers deliver a moderate to aggressive interior and exterior tone
- Built-in H-pipe/balance tube plus improved throttle response, power, and mileage
- Angle-cut brushed stainless steel tips exit straight out under the rear bumper for a clean finish
- Includes all hangers and hardware, is CARB compliant, and backed by a Lifetime Limited Warranty
- Engineered for 1969 Camaro and Firebird V8 models, including Convertibles with a simple X-brace adjustment
-
- Deep, powerful exterior tone with a mild to moderate interior sound level for everyday livability
- Super 50 Series performance muffler and specially designed resonator keep the cabin comfortable while boosting flow
- Mandrel-bent 3.00-inch aluminized steel tubing improves throttle response, power, and mileage
- Dual 2.50-inch tailpipes finished with 3.00-inch polished stainless steel tips for a subtle custom look
- Uses factory hanger locations with U-bolt clamps and includes all parts and hardware for an easy fit
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Aggressive, deep exhaust tone from a pair of Super 44 Series mufflers for enthusiasts who want to be heard
- Mandrel-bent 2.50-inch stainless steel inlet and tailpipes deliver maximum flow and lasting durability
- Improved throttle response, power, and mileage in a complete cat-back package
- Uses factory exhaust hangers with all parts and hardware included for a quick, easy installation
- CARB (California) compliant and backed by a Lifetime Limited Warranty
- Clean straight-back exit with a turn down at the lower valance; exhaust tips sold separately for a custom finish
-
- Delivers a deep, mellow tone at a mild-to-moderate sound level thanks to the included 50 Series Big Block™ muffler — refined inside and out
- CARB compliant and emissions-legal, so you can upgrade your exhaust while staying within state regulations
- Full mandrel-bent 409 and stainless steel construction with a polished 3.50-inch tip for smooth flow and a clean finished look
- Complete bolt-on kit with all necessary parts and hardware for quick, easy at-home installation
- Custom designed for 1996-1999 Chevy Tahoe / GMC Yukon 5.7L, 4-door 2WD and 4WD models
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Delivers a powerful exterior sound while keeping a moderate, livable interior tone
- Straight-through Flow FX mufflers with large 3.00-inch cores for maximum flow
- Durable bright 409S stainless steel construction for years of reliable service
- Dual 4.50-inch black ceramic coated tips embossed with the Flowmaster logo
- Uses factory hanger locations with included hardware and instructions for easy at-home install
- CARB (California) compliant, direct fit for 2016-2024 Camaro SS 6.2L coupes and convertibles
-
- Direct-fit axle-back upgrade for 2005-2010 Mustang GT, Shelby GT, GT500 (incl. GT500KR), California Special and Bullitt with 4.6L/5.4L engines
- Straight-through Flow FX mufflers with 3.00-inch cores deliver deep, aggressive-yet-moderate tone and strong flow
- Durable 409S stainless steel construction with dual 3.00-inch mandrel-bent tubing
- Large 4.50-inch ceramic-coated stainless tips with embossed logo fill the factory valance cutouts
- Bolts to factory hanger locations with all hardware and instructions included for easy installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- True-dual 3.00-inch mandrel-bent design with a built-in H-pipe crossover for balanced flow and maximum power
- Dual Super 40 Series performance mufflers deliver a deep, powerful, aggressive exhaust note
- Built from durable 409 stainless steel and backed by a Lifetime Limited Warranty
- Custom-bent tailpipes tuck up high and exit with a clean turn-down under the rear bumper
- Purpose-built for 1968-1972 GM A-Body V8s (2WD) and CARB compliant
- Comes complete with all necessary hardware and hangers for installation
-
- Adds up to 17 hp and 18 lb-ft at the rear wheels on the dyno
- Deep, aggressive-to-moderate exhaust tone from the Flow FX muffler
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow
- Dual 4.00-inch black ceramic-coated tips with embossed logo for a custom look
- Includes all hardware and new hangers with factory mounting locations for easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Purpose-built for 1964-1966 Ford Mustang V8 hardtop coupes (2WD) as a complete crossmember-back system
- Free-flowing 2.50-inch mandrel-bent stainless H-pipe and dual 40 Series Delta Flow mufflers for power and that iconic deep tone
- 2.50-inch 304 stainless steel tips and high-tucked tailpipes deliver a true show-car look
- Includes all necessary parts, hardware, and easy-to-follow instructions for a bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 12 hp and 13 lb-ft at the rear wheels for real, measurable performance gains
- Flow FX muffler delivers a deep exhaust tone at a moderate, daily-driver-friendly sound level
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and long-term durability
- Dual 4.00-inch black ceramic-coated tips with embossed logo add a custom, aggressive look
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of +11 hp and +13 lb-ft at the rear wheels on the 5.6L TITAN
- Durable 409 stainless steel construction throughout with 3.00 to dual 2.50-inch mandrel-bent piping
- Flow FX straight-through muffler delivers an aggressive-to-moderate performance tone
- Dual 4.00-inch black ceramic tips with laser-etched logo for a custom look
- Uses factory hanger locations with all hardware and instructions for easy at-home installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max gains of 10 hp and 10 lb-ft of torque at the rear wheels over stock on the 6.0-liter engine
- Durable 409 stainless steel throughout with 3.50 to 3.00-inch mandrel bent pipes for better flow
- Aggressive yet moderate Flow FX tone with dual 4.00-inch stainless tips and embossed logo
- Bolt-on install that uses factory hanger locations and includes all hardware and instructions
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct-fit for 2011-2019 GM 2500HD/3500HD extended or crew cab with 6.5-foot bed
-
- Complete bolt-on catback exhaust system engineered specifically for the 2015-2023 Dodge Challenger 3.6L
- Durable 409S stainless steel with 2.50-inch mandrel-bent tubing for smooth, unrestricted flow
- Scavenger X-pipe crossover and dual Super 44 mufflers deliver deep sound and maximum power
- Aggressive/moderate exterior tone paired with a mild interior sound for everyday driving comfort
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Includes all necessary parts and hardware for an easy, straightforward installation
-
- Patented D-Port scavenging technology crosses exhaust streams correctly to boost torque without the turbulence of lesser crossovers
- True dual 3.00″ inlet and outlet design — a genuine 3 inch x pipe built for 3.00″ main piping exhaust systems
- Stainless steel construction with durable 16-gauge material and a clean natural finish
- Weld-on installation lets you position the crossover exactly where it flows best on custom builds
- Replaces a traditional H-pipe crossover while retaining the classic Flowmaster sound
- Complete pipe kit with crosspipes included, purpose-built for modified muscle car applications
-
- Universal U-Fit Dual kit with enough mandrel-bent components to build a complete crossmember-back dual exhaust system
- Durable 409S stainless steel construction with a 16-gauge pipe wall for long-lasting strength
- Includes twelve 2.50-inch tubing pieces plus four 2.00-inch components for custom crossover pipe fabrication
- Slip-fit design lets you route and adjust the system to fit street rods, muscle cars, and pickups
- CARB (California) compliant with Emission Code 5 for street-legal builds where applicable
-
- Universal U-Fit Dual kit lets you fabricate a complete custom dual exhaust system for street rods, muscle cars and pickups
- Durable 16 gauge 409 stainless steel construction built to resist heat and last
- Includes twelve 3.00-inch tubing pieces plus four 2.00-inch crossover components in mandrel-bent configurations
- CARB (California) compliant with Emission Code 5
- Modular pipe kit pairs with your choice of muffler, tips and hangers for a tailored build
-
- Custom pre-bent to match Flowmaster system part# 817413 for a precise, headers-back fit
- 16 gauge mandrel-bent 2.50-inch stainless steel tubing for smooth flow and lasting durability
- Dual exit design that tucks up high above the rear axle for a clean look and clearance
- Specific fit for 1959-1964 Chevrolet Impala, Biscayne & Bel Air V8 models
- Includes clamps, hangers, and necessary hardware for a clean, easy installation
- Two tailpipe exit options depending on your vehicle’s year
-
- Complete dual cat-back system with mandrel-bent 2.50-inch stainless steel tubing for maximum flow
- Includes matched Super 40 Series mufflers for an aggressive, unmistakable exhaust tone
- Delivers improved throttle response, power, and mileage in a single upgrade
- Large 3.00-inch polished dual tips exit in the factory location for a clean, aggressive look
- Uses factory hanger locations with all hardware and instructions for an easy at-home install
- CARB (California) compliant for legal, worry-free fitment
Showing 217–240 of 516 results
