Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AEM-21-734C Cold Air Intake System
$349.99
-
Audi (Sedan - 2.0, 3.0) Intercooler
$1,007.18
-
Takeda AFE-56-70034D-p Momentum Cold Air Intake System Toyota RAV4 19-22 L4-2.5L
Price range: $438.35 through $451.17
-
20-26 Chevrolet Corvette (Convertible/Coupe - 6.2 - AWD/RWD) Exhaust System Kit
$3,192.03
-
Chevrolet, GMC (6.6) Computer Chip Programmer
$1,537.95
Image
Product
Price
-
- Deep, mellow, mild-to-moderate tone from the 70 Series Big Block II muffler (P/N 53073) — refined inside and outside the cab
- 3.00-inch mandrel-bent aluminized steel inlet and tailpipe for smooth, unrestricted flow
- Bolt-on fit that uses factory hanger locations for a quick, at-home installation with included hardware
- CARB (California) compliant and emissions-legal, so it’s street-legal in all 50 states
- Purpose-built for 1994–1997 Ford F-250/F-350 5.8L/7.5L trucks — fits 2WD and 4WD, all wheelbases including Crew Cab
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Fully polished stainless steel with double-wall construction for lasting shine and durability
- Clamp-on installation slides over your pipe and secures — no welding needed
- Steps up from a 2-1/2 inch inlet to a bold 3 inch outlet for an upsized look
- Dual angle cut styling with an embossed Flowmaster logo adds instant curb appeal
- Sold individually so you can order exactly the configuration your car exhaust needs
-
- All stainless steel 409S construction backed by Flowmaster’s Limited Lifetime Warranty
- Exclusive 80 Series Crossflow muffler retains full ground clearance in the factory rear-axle location
- Mandrel-bent dual 2.50-inch pipes with H-pipe crossover for a deep, smooth tone and reduced deceleration back-rap
- Moderate sound level delivers a rich exhaust note without an overwhelming cabin drone
- CARB compliant and includes all parts, hardware, and illustrated instructions for a complete install
- Direct-fit for 1967-1974 Camaro and Firebird and 1968-1974 Nova in 2WD applications
-
- Deep, aggressive exterior sound with a moderate, livable interior tone from the Super 50 Series muffler
- 16-gauge mandrel-bent stainless steel tubing with dual 2.50-inch tailpipes and 3.00-inch polished tips
- Choose Dual Out Rear for towing or Dual Out Side for a muscular look
- Bolt-on install using factory hanger locations with all hardware included
- Emissions-legal, CARB (California) compliant, and backed by a Lifetime Limited Warranty
- Direct fit for 2006-2008 Ram 1500 5.7L Hemi, 2WD/4WD, all wheelbases except MegaCab
-
- Deep, aggressive Flow FX straight-through sound with maximum flow for real performance
- Built from durable 409S stainless steel throughout for long-lasting corrosion resistance
- Angled side-exit dual tailpipes direct exhaust away from your boat or trailer when towing
- Finished with large 4.50-inch black ceramic-coated 304S stainless tips for a custom look
- Easy at-home install using factory hanger locations, with all hardware and instructions included
- CARB (California) compliant and fits both 2- and 4-Wheel Drive applications
-
- Deep, aggressive exterior sound with a moderate interior tone from the tuned Super 50 Series muffler
- Bolt-on installation using factory hanger locations, with all parts and hardware included
- DOR/DOS design lets you exit behind the rear wheels for towing or straight out the back for looks
- 16-gauge mandrel-bent stainless steel tubing and 3.00-inch polished stainless tips for flow and style
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Purpose-built for the 2006-2008 Dodge Ram 1500 4.7L, fitting 2WD and 4WD (except MegaCab)
-
- Deep, aggressive exterior sound with a moderate, drone-free interior tone
- Direct bolt-on fit for 2000-2006 Toyota Tundra 4.7L (2WD) using factory hanger locations
- 16-gauge mandrel-bent stainless tubing and a Super 50 Series muffler for strong flow and performance
- Two tailpipe exit options — behind the rear wheels for towing or straight out back for a muscular look
- Emissions-legal and CARB compliant, finished with polished 3.00-inch stainless tips
- Includes all parts and hardware plus Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior tone with a moderate interior sound that won’t drive you out of the cab
- Heavy 16-gauge mandrel-bent stainless steel construction for lasting durability and strong flow
- Includes the stainless Super 40 Series performance muffler and polished 304 stainless tips
- Dual 2.50-inch tailpipes offer two exit options — straight out the back or side-exit for towing
- CARB compliant and made to fit 1999-2007 (2007 Classic Only) GM 1500 Ext Cab/Short Bed 4WD trucks
- Complete kit with all hardware and instructions for an easy at-home install
-
- Adds improved horsepower and torque with a moderate, aggressive performance tone inside and out
- Built entirely from durable 409S stainless steel with mandrel-bent 2.50-inch tubing
- Dual tailpipes exit both sides behind the rear tires, finished with 3.00-inch polished Flowmaster-embossed tips
- Complete bolt-on kit with instructions and all hardware for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2005-2012 Toyota Tacoma 4.0L (not standard cab or X-Runner)
-
- Heavy 16-gauge mandrel-bent stainless steel construction for long-lasting durability and maximum flow
- Super 50 Series muffler delivers an aggressive exterior tone with a moderate interior tone that won’t drown out cab conversation
- Choose your exit: true dual rear or dual side-exit behind the rear wheels — ideal for towing
- Dual 2.50-inch tailpipes clear the factory spare tire, finished with polished 304 stainless tips
- CARB (California) compliant and includes all hardware and instructions for an easy at-home install
-
- Complete cat-back kit with a 50 Series Big Block muffler for a mild-to-moderate, non-droning tone
- 3.50-inch mandrel-bent stainless steel tubing plus a large 4.00-inch polished stainless tip
- Tailpipe exits behind the right rear tire, purpose-built for towing applications
- Uses factory hanger locations for a quick, at-home install with included hardware and instructions
- Emissions legal and CARB compliant, backed by a Limited Lifetime Warranty
- Purpose-fit for 2011-2019 Silverado/Sierra 2500HD/3500HD crew cab 6.0L trucks (2WD & 4WD, 6.5ft bed)
-
- Complete cat-back dual exhaust delivering an aggressive exterior tone with a moderate, drive-friendly interior sound
- Dual 2.50-inch mandrel-bent stainless steel tubing paired with the Scavenger Series X-pipe for maximum scavenging and a deep tone
- Super 40 Series performance mufflers offer more internal volume to handle Hemi flow demands
- Highly polished 304 stainless steel 4.00-inch dual tips exit straight out under the rear valance
- Uses factory hanger locations and includes all hardware for an easy at-home installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Mandrel-bent 2.50-inch tubing keeps the diameter consistent through every bend for maximum flow
- Durable 16-gauge aluminized steel construction built to handle life under the vehicle
- Pre-bent to tuck high in the chassis and exit straight out under the rear bumper for good clearance
- Engineered to pair with Side Inlet/Center Outlet mufflers like the Super 44 (942546) or 50 Series (942551)
- Backed by a 3-year Limited Warranty for added peace of mind
-
- True dual exhaust built from all mandrel-bent 3.00-inch aluminized steel tubing for smooth, high flow
- H-pipe equalizes exhaust gas pressures for balanced sound, maximum performance, and clearance
- Ships without mufflers so you choose your exact sound level with Super 44 or Super 50 Series mufflers
- Custom designed for most 1968-1972 GM A-body cars with an easy fit in mind
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Durable 16-gauge pipe wall with dual tail pipes and simple U-bolt clamping
-
- Steps up to 3-inch mandrel-bent aluminized steel tubing for improved flow over the factory exhaust
- Includes the Super 50 Series muffler (PN 53056) for a mild interior and moderate exterior tone — power without the drone
- True bolt-on design uses factory hanger locations and includes all parts and hardware for easy at-home installation
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom look
- Ideal for daily drivers and light towing such as boats and RVs; CARB compliant and backed by a 3-year Limited Warranty
-
- Straight-through Flow FX muffler delivers a moderate, deep and powerful tone with minimal interior resonance
- 409 stainless steel construction and 16-gauge mandrel-bent tubing for durability and unrestricted flow
- 4.50-inch black ceramic-coated 304 stainless steel tip embossed with the Flowmaster name
- Uses factory hanger locations with all hardware and detailed instructions for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- High-tucked tailpipe routing helps protect the system over rocky, uneven terrain
-
- Built from durable 409S stainless steel for years of trouble-free performance
- Flow FX straight-through muffler delivers an aggressive, deep performance sound
- Finished with a large 4.50-inch black ceramic coated 304S stainless tip with embossed logo
- Bolts on using factory hangers — no cutting or welding, with all hardware and instructions included
- CARB compliant and fits 2009-2013 Silverado/Sierra 4.8L and 5.3L, 2WD and 4WD
-
- Adds up to 7 hp and 6 lb-ft at the rear wheels over stock for a real, measurable gain
- Flow FX muffler delivers a moderate/mild tone — aggressive sound without cabin drone
- Mandrel-bent 2.5-inch 409 stainless steel construction for maximum flow and lasting durability
- Larger 4.00-inch black ceramic-coated tips with embossed logo for a bold custom look
- Uses factory hangers and includes all hardware for a straightforward bolt-on install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Includes a pair of Super 44 Series mufflers tuned for that iconic deep, aggressive 5.0L Fox body sound
- Bolt-on installation using factory hanger locations, with all hardware and easy-to-follow instructions included
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Long 2.50-inch 304 stainless steel dual tips deliver a genuine show-car look
- Emissions-legal and CARB (California) compliant to keep your Mustang street-legal
- Fits 1987-1993 Mustang LX and 1986 Mustang GT with 5.0L, coupes and convertibles
-
- Bolt-on performance with maximum dyno gains of 21 hp and 26 lb-ft at the rear wheels
- Durable 409 stainless steel construction throughout for long-term corrosion resistance
- Deep, moderately aggressive Flow FX straight-through sound tuned for daily driving and towing
- Dual mandrel-bent tailpipes exit through factory bezels to keep the stock dual exhaust look
- CARB compliant and legal in all 50 states
- Uses factory hangers and includes hardware and instructions for easy at-home installation
-
- Aggressive exterior sound with a moderate interior tone, tuned by Super 44 Series performance mufflers
- 3.00-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe for maximum power and a deep tone
- Dual tailpipes with large 4.00-inch polished 304 stainless steel tips that fill the factory valance cutouts
- Easy bolt-on install using factory hanger locations, with all hardware and instructions included
- Emissions-legal and CARB compliant, backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2010-2013 Camaro SS 6.2L coupes (does not fit NPP quad-tip models)
-
- Replaces the restrictive factory flattened downpipe with 3.00-inch mandrel-bent tubing for maximum exhaust flow
- Factory style turbo flange and 3-bolt crossover flanges deliver a direct, precise fit with no fabrication
- Durable 16 gauge aluminized steel construction resists corrosion and holds up to turbo exhaust heat
- V-band clamping ensures a secure, leak-resistant connection
- Comes complete with all necessary hardware and instructions for an easy at-home installation
-
- Frees up power and sound on 4.7L and 5.7L Hemi 2009-2024* (classic body) RAM 1500 4WD trucks
- 50 Series HD muffler tunes in an aggressive exterior tone while keeping cab drone to a minimum
- Durable 16-gauge mandrel-bent stainless steel tubing with dual polished 3.00-inch tips
- Choose dual side exit for towing or straight rear exit for a muscular look
- Complete kit with all parts and hardware for an easy at-home install
- CARB (California) compliant for legal, worry-free upgrading
-
- Delivers improved throttle response, power, and mileage with a moderate, non-intrusive tone
- Built from large 3.00-inch aluminized steel tubing and includes a 70 Series Big Block II muffler (PN 53073)
- Especially recommended for towing applications thanks to its efficiency-focused, mild-to-moderate sound
- Angle-cut tailpipe lets you finish the look with your own choice of exhaust tip (sold separately)
- CARB (California) compliant and fits both 2WD and 4WD models on 133, 155, or 168.4-inch wheelbases
- Easy fit with all necessary parts, hardware, and U-Bolt clamping included
Showing 1–24 of 516 results
