Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Flowmaster Flow FX Cat-back Exhaust System
$595.69
-
Flowmaster American Thunder Cat-back Exhaust System
$1,031.90
-
aFe Power AFE-51-74207-p Momentum GT Cold Air Intake System Cadillac CTS-V 09-15 V8-6.2L (sc)
Price range: $410.00 through $420.00
-
14-21 Jeep Grand Cherokee SRT (Sport Utility - 6.4 - AWD) Exhaust System Kit
$2,179.53
-
18-26 Dodge Durango (6.2, 6.4) Exhaust System Kit
$2,232.83
Image
Product
Price
-
- Delivers improved throttle response, power, and mileage with a moderate, refined tone
- Includes both dual-out-the-rear and dual-out-the-side tailpipes so you can match your setup to your lifestyle — side exits recommended for towing
- Built with a stainless steel PRO Series oval-case muffler and mandrel-bent stainless tubing for durability and smooth flow
- Uses factory hanger locations for an easy, hassle-free at-home installation with all hardware included
- CARB compliant (Emission Code 5) for street-legal confidence
-
- Deep, mellow, mild sound level from the 50 Series Big Block™ muffler — refined inside and out
- 3.00-inch mandrel-bent aluminized steel piping for smooth, consistent flow
- True bolt-on install using factory hanger locations with all hardware included
- Large 4.00-inch polished stainless steel tip for a clean finished look
- Emissions-legal and CARB (California) compliant, backed by a 3-year Limited Warranty
- Custom-fit for 1996-1999 Tahoe/Yukon 5.7L, 2-door models (2WD/4WD)
-
- 3.00-inch mandrel-bent 16-gauge aluminized steel tubing keeps flow smooth and consistent while resisting corrosion
- Pre-bent, direct-fit design saves you the hassle of fabricating your own bends
- Tucks high in the chassis for great clearance and exits at the rear quarter panel with a turned-down angle
- Purpose-built to pair with Side Inlet/Center Outlet mufflers like the Super 44 (943046) or 50 Series (943051)
- Backed by Flowmaster’s 3-Year Limited Warranty
-
- Complete cat-back exhaust system with the 70 Series Big Block II™ muffler (PN 53070) included
- Deep, mellow tone with minimal interior resonance for a moderate, refined sound level
- Single 3.00-inch mandrel-bent tailpipe exits passenger-side behind the rear wheel — ideal for towing
- Durable aluminized steel construction with easy bolt-on install using factory hanger locations
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
- Fits 1998-2001 Ram 1500 (3.9/5.2/5.9L) and 1998-2002 Ram 2500/3500 (5.9L), 2WD & 4WD, all wheelbases
-
- Bolt-on Flowmaster Force II cat-back system designed for 1987-1993 Ford F-250/F-350 7.5L trucks with a 2.50-inch catalytic converter
- 70 Series Big Block II muffler delivers a deep, mellow, moderate tone inside and out
- 3.00-inch mandrel-bent 16-gauge aluminized steel inlet and tailpipe with an angle-cut turn-down tip for improved flow
- CARB compliant and emissions-legal, backed by a 3-year Limited Warranty
- Includes new hangers, U-bolt clamps, and an aluminum heat shield for a quick, at-home install using factory hanger locations
- Fits 2WD/4WD and all wheelbases, including Crew Cab
-
- Super 44 Series mufflers deliver an aggressive, deep and powerful Fox body 5.0L sound
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and dual aluminized tailpipes
- Bolt-on install using factory hanger locations, with all hardware and instructions included
- CARB (California) compliant and emissions legal for street-legal peace of mind
- Fits 1986-1993 Mustang LX and 1986 GT 5.0L coupes and convertibles
-
- Exclusive 80 Series Crossflow muffler delivers a deep, moderate tone inside and out
- Complete dual 2.50-inch mandrel-bent system with built-in H-pipe crossover for balanced flow
- Purpose-fit for 1967-1974 Camaro/Firebird and 1968-1974 Nova classic muscle cars
- Includes all parts, U-bolt hardware, and illustrated instructions for a straightforward install
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
- Aluminized steel construction with the muffler tucked high behind the rear differential for clean clearance
-
- Deep, powerful sound from the 80 Series Cross-flow muffler with a moderate-to-aggressive exterior tone and mild-moderate interior tone
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes finished with polished stainless steel tips for a muscular look
- Improves throttle response, power, and mileage as part of a complete Flowmaster cat-back system
- Bolts to factory hanger locations with U-Bolt clamps and includes all hardware for easy installation
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- Specific fitment for 1963–1974 Dodge/Plymouth A-Body cars for a factory-like rear exit
- 2.5-inch, 16-gauge aluminized steel resists heat and corrosion
- Mandrel-bent tubing keeps flow strong through every bend
- Dual kit designed for offset inlet/outlet mufflers, exiting straight out the rear under the bumper
- Skip the hand bending—add a clean, correct tailpipe to any custom exhaust build
- Covered by Flowmaster’s three-year limited warranty
-
- Deletes the restrictive factory resonator to boost your Mustang’s sound and performance
- Direct fit for 2015-2023 Ford Mustang 2.3L EcoBoost coupes and convertibles
- Mandrel-bent stainless steel with D-port tech and a Scavenger Series Y-collector for clean, consistent flow
- Runs with factory rear mufflers or a Flowmaster Axle-back exhaust system
- Includes all parts, hardware, and easy-to-follow instructions for a straightforward install
- Backed by the Flowmaster Lifetime Limited Warranty
-
- True-dual, mandrel-bent 3.00-inch aluminized steel construction with a built-in H-pipe crossover for maximum flow and power
- Dual Super 40 Series mufflers deliver a deep, powerful, aggressive exhaust note
- Custom-bent tailpipes tuck high and exit cleanly at the quarter panels for a purposeful look
- Complete crossmember-back kit includes mufflers, hangers, and U-Bolt hardware for a straightforward install
- CARB (California) compliant and covered by a 3-year Limited Warranty
- Purpose-built for 1967-1969 Camaro and Firebird V8s from 307 through 427 cubic inches
-
- Iconic deep, aggressive-to-moderate tone from a pair of Super 44™ Series mufflers
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and dual tailpipes for improved flow
- Bolts to factory hanger locations with included U-bolt hardware and instructions for easy installation
- Long 2.50-inch 304 stainless steel tips deliver a genuine show-car look
- Emissions legal and CARB (California) compliant for the 1998 Mustang GT and Cobra 4.6L
-
- Complete 2.50-inch crossmember-back dual exhaust for most 1964-1972 GM A-body cars
- Includes a pair of Super 40 Series mufflers for a moderately aggressive exterior and moderate interior tone
- H-pipe and all mandrel-bent aluminized steel tubing for maximum flow, power, and throttle response
- Two tailpipe exit style choices with tailpipes tucked up for maximum clearance
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
- Ships with all necessary parts, hardware, and U-bolt clamps for an easy install
-
- True dual exhaust with all mandrel-bent 3.00-inch aluminized steel tubing for smooth, unrestricted flow
- Integrated H-pipe equalizes exhaust pressures for balanced sound and maximum performance
- Sold minus mufflers so you choose your own Flowmaster sound level and tips
- Custom designed for most 1967-1969 Chevrolet Camaro and Pontiac Firebird for an easy fit
- CARB (California) compliant and backed by a 3-year Limited Warranty
- U-Bolt clamping and generous clearance make for a clean, straightforward installation
-
- Deep, moderate exhaust tone from the dual 3.00-inch inlet 50 Series Big Block muffler — powerful without excessive cabin drone
- Direct-fit cat-back exhaust system for 1996-1999 Chevrolet Silverado / GMC Sierra 2500/3500 with 5.7L or 7.4L engines
- Towing-ready turndown tip exits behind the right rear wheel with a mandrel-bent aluminized steel tailpipe for smooth flow
- True bolt-on install using factory hanger locations, with clamps and hardware included for at-home installation
- CARB compliant and emissions-legal, backed by a 3-year Limited Warranty
-
- Deep, powerful tone from the large-case 80 Series Cross-flow muffler with a moderate-to-aggressive exterior sound
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes for smooth flow and improved throttle response, power, and mileage
- Bolts up to factory hanger locations with U-Bolt clamps and all included hardware for an easy, no-cut install
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
-
- Dyno-proven gains of +11 hp and +15 lb-ft of torque at the rear wheels
- Straight-through Flow FX muffler delivers an aggressive-to-moderate sound level
- 409 stainless steel construction with mandrel-bent 3.5-to-dual-3.0-inch pipes for durability and flow
- Dual side exit with 4.50-inch black ceramic tips and embossed logo for a custom look
- Easy at-home install using factory hangers, with all hardware and instructions included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of +3 hp and +4 lb-ft at the rear wheels on the 5.7L Tundra
- Durable 409 stainless steel construction with 2.5-inch mandrel-bent pipes for improved flow
- Flow FX straight-through muffler tuned for a moderate, performance-focused sound
- Dual side-exit design finished with 4.50-inch black ceramic tips and embossed logo
- Bolts to factory hanger locations with all hardware and instructions included for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Polished stainless steel with an embossed Flowmaster logo for lasting shine and genuine styling
- Clamp-on attachment means a no-weld, tool-friendly installation
- 2-1/2 inch inlet to 3.00 inch outlet with a 12 inch round, straight rolled-edge profile for bold presence
- Fits pipe diameters from 2.50 to 3.00 inches, matching many catback exhaust systems
- High Performance grade, single-wall construction sold individually for single or dual setups
-
- Cat-back exhaust system purpose-built for 2000-2003 Dodge Dakota 4.7L, 5.2L and 5.9L trucks
- Super 50 Series muffler delivers a moderate/mild sound inside and out with real performance flow
- Mandrel-bent aluminized steel inlet and 3.00-inch tailpipe finished with a 3.50-inch polished stainless tip
- CARB compliant and emissions-legal (Emission Code 5) for a street-legal upgrade
- Bolt-on install with all parts, U-Bolt hardware and instructions included, backed by a 3-year Limited Warranty
- Fits both 2WD and 4WD models across all wheelbases for wide Dakota coverage
-
- Deep, aggressive Outlaw Series sound inside and outside your Mustang GT
- Exclusive dual 3.00-inch Scavenger Series X-pipe maximizes power and tone
- Race-proven Outlaw mufflers plus dual mandrel-bent stainless tailpipes with polished 4.00-inch tips
- Emissions-legal and CARB (California) Compliant bolt-on catback exhaust
- Includes all parts and hardware for an easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- True dual crossmember-back design with a built-in H-pipe crossover for balanced flow and a stronger pull
- Super 44 Series mufflers deliver a deep, moderate-to-aggressive tone you can hear inside and out
- 16-gauge mandrel-bent aluminized steel with 2.50-inch dual tailpipes and a rear-bumper turndown
- Improves throttle response, power and mileage over the factory system
- Includes all hangers and hardware needed for installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Complete crossmember-back exhaust system built specifically for the 66-67 Ford Fairlane with 289, 390, or 427 engines
- 2.50-inch mandrel-bent 16 gauge aluminized steel tubing plus an H-pipe crossover to maximize flow and eliminate deceleration backrap
- Large-case Super 50 Series mufflers deliver a deep, powerful sound with built-in resonators to keep interior drone down
- Dual mandrel-bent tailpipes capped with 3.00-inch angle-polished stainless steel tips for an aggressive finished look
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty on aluminized steel systems
- Includes all necessary parts, hardware, and instructions for a complete installation
-
- Complete American Thunder cat-back exhaust system with the dual-inlet 50 Series Big Block muffler included for a deep, powerful tone
- Delivers a moderate interior tone with an aggressive exterior sound — heard without being obnoxious
- Designed to improve throttle response, power, and mileage on your 6.0 Chevrolet/GMC truck
- Tailpipe exits behind the right-side rear wheel, an ideal layout for towing
- Finished with a large 3.50-inch polished 304 stainless steel tip embossed with the Flowmaster logo
- CARB (California) compliant and uses factory hanger locations for an easy, bolt-on installation
Showing 169–192 of 516 results
